• Corrosion Science and Technology
• /
• v.17 no.1
• /
• pp.1-5
• /
• 2018

As structural materials, magnesium (Mg) alloys have been widely used in the fields of aviation, automobiles, optical instruments, and electronic products. There are few studies on the effect of coating conditions on the compositional variation during the formation process of the conversion coatings. Rare-earth based conversion coating on AZ91 magnesium alloy was prepared in ceric sulfate and hydrogen peroxide contained solution. The element composition and valence as well as their distribution in the coating were analyzed with energy dispersive X-ray spectroscopy (EDS), Electron probe micro-analyzer (EPMA), X-ray photoelectron spectroscopy (XPS). The effect of treating process on the element composition were also studied. It was found that the conversion coating surface consists of Mg, Al, O, Ce, and the weight content of Ce in the coating was affected by the treating solution concentration and immersion time; the Ce element was distributed in the coating non-uniformly and existed in the form of $Ce^{+3}$ and $Ce^{+4}$, while the O element existed in the form of $OH^-$, $O^{2-}$, $H_2O$. Based on microscopic analysis results, the electrochemical deposition mechanism on the micro-anode and micro-cathode in the process of the coating growth was suggested.

• 보존과학연구
• /
• s.11
• /
• pp.87-105
• /
• 1990

Chemical and micro morphological changes of archaeological waterlogged woods from shipwrecked materials in marine situations were investigated which were submerged in seabed for over 900 years. Tested Wood species were Pinusdensiflora, Zelkova serrata, Quercus acutissima and Camellia japonica. The obtained results were summarized as follows; Chemical analysis showed that lignin content was increased, whereas the amout of holocellulose was heavily decreased in the degraded archaeological lwoods(DAW), when compared to the recent woods. The amount of alkalineextractives in the DAW was extremley high. IR spectra showed that disappearance of absortion band at $1,730㎝^-1$ intensity increase at 1,600, 1,500 and $1,270㎝^-1$ and the emergence of single band around $1,050㎝^-1$.Microscopic investigation showed that cell wall of latewood tracheids and fiber in the DAW were severely degraded while, early wood tracheids less degraded. Degradation in the cell wall was mainley occurred in $S_2$layer, while the middle lamella was the least degraded. The micro morphological characteristics of DAW were separation of secondary wall from middle lamella, cavities aligned with micro fibril angle in $S_2$layer and granular appearance of secondary wall by the bacterial attack.

• The Journal of the Korea Contents Association
• /
• v.9 no.6
• /
• pp.17-24
• /
• 2009

This paper proposes a new e-learning model which introduces a participant method based on concepts of open source as well as UCC of web2.0 and achieves learner-centered learning. It is possible for learner to participate actively in creation of micro-contents and reorganize contents using various micro-content with one's learning strategies in consideration of one's own intellectual power, learning objectives and propensity to learn. The learner can achieve the learner-oriented learning through this procedure and select micro-contents in order to reorganize the personalized learning contents to take advantage of social network among learners. The higher effectiveness of learning would be expected by forming connectedness among learners using social network.

• Journal of Engineering Education Research
• /
• v.24 no.5
• /
• pp.46-52
• /
• 2021

This study introduces the development and application of instructional materials for a micro-UAV (unmanned aerial vehicle) design and manufacturing program in university education for freshman/sophomore students. The ADDIE methodology was applied to the development of educational materials, which consist of 15 lessons including the aircraft design theory, 3D CAD modeling, 3D printing production, and UAV flight control. The validity of the program was evaluated with 8 expert panels. A total of 82 participants from engineering and social science grouped the 16 teams for the creative UAV wing design and cooperative interactions. The results of overall program satisfaction survey was measured highly as the average 4.54 (out of 5), so that the students were content with the professional engineering knowledge, 3D digital tools, and the opportunity to design and manufacture airplanes on their own. In conclusion, it can be confirmed that the developed program is effective for UAV education for junior level college student.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.12
• /
• pp.1633-1640
• /
• 2018

Epoxy resin is a polar thermosetting polymer that is widely employed in different branches of industry and everyday life, due to their stable physical and chemical properties. Of all the polymer materials currently being used in the electrical insulation industry, epoxy resin is the most widely used kind, chosen as the base polymer material in the present study. Composites were prepared according to the mixing ratio (MS: MA, 1: 9, 3: 7, 5: 5, 7: 3, 9: 1)of mixture for Heterogeneous Minerals(Micro Silica:MS, Micro Alumina:MA) (MS+MA). We have investigated for AC electrical insulation breakdown characteristics and the dielectric properties (permittivity, dielectric loss, and conductivity) with frequency changes. The electrical AC insulation breakdown performance was improved with the increase of the mixing ratio of MS according to heterogeneous mineral material mixture(MS+MA). As Dielectric properties, the dielectric constant and dielectric loss increased with decreasing frequency and decreased with increasing MS content ratio of heterogeneous mineral mixture. Tensile strength and flexural strength according to the mixing ratio (MS + MA) of epoxy / heterogeneous mineral mixture were studied by mechanical properties. The performance of mechanical tensile and flexural strength was significantly improved as the fill contents ratio of MS increased.

• Resources Recycling
• /
• v.15 no.1 s.69
• /
• pp.66-73
• /
• 2006

The effects of operation conditions, such as bed temperature, temperature rising rate, particle size, moisture content and so on, on thermo-chemical conversion of waste wood have been determined in a micro fixed bed gasifier. The samples were waste wood-chips such as pine, oak, acacia and ginkgo. The thinning timbers used as reactants in the experiments had $35wt\%$ moisture content, $0.5wt\%$ ash content and 4,550 kcal/kg heating value on a dry basis. A typical product distribution was a $40wt\%$ liquid, $20wt\%$ solid, and $40wt\%$ dry syngas. The syngas concentration was affected by operation conditions and average syngas concentration was $H_2:40vol\%,\;CO:30vol\%,\;CH_4:10vol\%$.

• The Journal of Industrial Distribution & Business
• /
• v.9 no.2
• /
• pp.65-72
• /
• 2018

Purpose - One of the biggest problems in the e-learning distribution process is the lack of quality content and learners' discredit in e-learning content. In order to respond to the various demands of the corporate education field appropriately, it is necessary to search for directions of new e-learning models that are out of traditional e-learning contents. The purpose of this study is to identify recent trend issues related to corporate e-learning and to suggest directions for development. Research design, data, and methodology - Based on the literature review, trend issues that should be considered important in corporate e-learning were derived. Online survey was conducted to evaluate the importance-feasibility of each issue to 13 experts on e-learning and corporate education. The contents of the questionnaire are as follows: 1) recognition of importance and feasibility of trend issues to be considered important in the future corporate education field; 2) factors to be considered in developing future e-learning contents. Results - Six trends derived from a comprehensive literature review. The most important e-learning trends for corporate education field were 'mobile learning', 'micro learning', 'blended learning', 'social learning', 'adaptive learning', 'engaged learning'. As a result of evaluating the importance and feasibility of each issue, experts point out that 'mobile learning' and 'micro learning' should be actively considered for introduction and utilization at present. In addition, 'social learning' and 'blended learning' need to be actively considered in the near future. On the other hand, experts recognized that 'adaptive learning' and 'engaged learning' need to be prepared from a long-term perspective. Conclusions - There are two main reasons for this result. First, in corporate e-learning, it is important to 1) be able to update on time, 2) the connection with the workplace is important. Second, it requires realistic verification of the expected performance of the learning model. To be considered part of the future are as follows: First, the value and effectiveness of the new e-learning type should be studied. Seconds, e-learning contents should be developed through adopting SAM or Agile methodology. Through this process, we would be able to enhance the quality in e-learning content.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.22 no.3
• /
• pp.672-677
• /
• 2008

In order to explore the anti-oxidization effect of oriental medicine and cereal medium(OCM) where Tricholoma matsutake mycelia were cultured, measurement of hot water extract and UMPM(extraction method using ultra sonic waves, micro waves, micro bubble) extract, the total polyphenol content of crude polysaccharide from each extract, SOD-like activity, electron donating ability(EDA), xanthine oxidase inhibitory activity, and tyrosinase inhibitory activity was conducted. The total polyphenol content of each extract was found to be 16.36% for hot water extract(HE) group and 15.73% for UMPM extract(UE) group and the amount of crude polysaccharide precipitated into ethanol of extracts was found to be 8.79% for UMPM ethanol extract(UEE) group and 6.48% for hot water ethanol extract(HEE) group. As a result of measurement of SOD-like activity by concentration of each extract, it was found to be 96.17% for UE group, 91.23% for HE group, 91.33% for UEE group, and 87.11% for HEE group at 20 mg/mL. In the case of EDA, it was found to be 47.55% for UE group, 44.93% for HE group, 25.38% for UEE group, and 18.36% for HEE group. And in the cases of the rates of xanthine oxidase inhibitory activity and tyrosinase inhibitory activity, as the concentration of each extract increased, the inhibition rate increased accordingly. As a result of comparison between hot water extract method and UMPM extract method using extracts obtained from oriental medicine compound medium where Tricholoma matsutake mycelia were cultured, all of the extracts were judged to have a high anti-oxidization effect. In particular, UMPM extracts were found to have higher polyphenol content, SOD-like activity, EDA, xanthine oxidase inhibitory activity and tyrosinase inhibitory activity compared to hot water extract method. In this regard, extracts obtained from OCM where Tricholoma matsutake mycelia were cultured are considered to have high availability as functional material when and if they are prepared using UMPM extract method.

• International Journal of Contents
• /
• v.18 no.2
• /
• pp.47-57
• /
• 2022

e-Learning content can be defined as digital content to achieve educational goals. Since it is an educational material that can be distributed in offline, online, and mobile environments, it is important to create content that meets the learner's education environment and educational goals. In particular, if the learner is a public official, the vision, philosophy, and characteristics of each local government must reflect. As non-face-to-face online education expands further due to the COVID-19 pandemic, local governments that have relied on onsite education in the past urgently require developing strong basic competency education and special task competency content that reflect regional characteristics. Such e-learning content, however, hardly exists and the ability to independently develop them is also insufficient. In this circumstance, this case study describes the process of self-production of e-learning content suitable for Busan's characteristics by the Human Resource Development (HRD) Institute of Busan City, a local government. The field of instructional design and instructional technology is always evolving and growing by blending technological innovation into instructional platform design and adapting to the changes in society. Busan HRD Institute (BHI), therefore, tried to implement blended learning by developing content that reflected the recent trend of micro-learning in e-learning through a detailed analysis. For this, an e-learning content developer with certain requirements was selected and contracted, and the process of developing content through a collaboration between the client and developer was described in this study according to the ADDIE model of Instructional Systems Development (ISD).

• Journal of Nutrition and Health
• /
• v.28 no.7
• /
• pp.620-628
• /
• 1995

This study investigated micro-mineral content in human milk along with nutritional intake of lactating women. Milk samples were collected from 33 healthy lactating women and mineral levels were analyzed. Copper, zinc, manganese and selenium were analyzed. The factors that affect the mineral levels in human milk were also investigated longitudinally from 2-5 days to 12 weeks postpartum. Concentrations of manganese and selenium didn't differ significantly within the lactation period. the levels of copper and zinc declined linearly over the first 12 weeks of lactation. Statistically significant quadratic trends were observed in zinc concentrations. There was no significant correlation between maternal age and mineral concentrations throughout the lactation period. In addition, no significant differences were found between the primipara and the multipara for mineral concentrations in human milk.