• Journal of electromagnetic engineering and science
• /
• v.11 no.4
• /
• pp.257-261
• /
• 2011

A highly efficient 2.4 GHz rectenna is designed using a harmonic rejection bandpass filter. The rectenna is printed on Rogers Duroid 5880 substrate with ${\varepsilon}_r$=2.2 and a thickness of 1.6 mm. The rectenna consists of a microstrip antenna and high order harmonic rejection bandpass filter, microstrip lowpass filter, and Schottky barrier diode (HSMS2820). The use of a $2^{nd}$ and $3^{rd}$ harmonic rejection microstrip bandpass filter in the rectenna results in high conversion efficiency. The proposed rectenna achieves a RF to DC conversion efficiency of 72.17 % when the received RF power is 63.09 mW.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.10
• /
• pp.24-28
• /
• 1992

A new design method of microstrip wide band VHF tunable bandpass filters using varacter diodes is presented. In the proposed filter both the input and output ports are coupled through capacitors, and an open micro-strip line is inserted between the coupled line in order to obtain the desired degree of coupling. The optimized filter responseses for the frequency range of 220-404MHz by TOUCH-STONE are compared with the measured ones.

• Journal of IKEEE
• /
• v.10 no.2 s.19
• /
• pp.109-115
• /
• 2006

In this paper, High order derivative Gaussian pulse generator for DS-UWB communication satisfying the regulation of FCC was proposed and fabricated. In order to transform rectangular signal of 100Mbps to a Gaussian pulse, the fabricated Gaussian pulse generator consists of only two SRD. The output pulse had the widths of 330 psec and amplitudes of 920 mV. In addition, the designed and fabricated dual bandpass filter shows high order derivate characteristics by using micro-strip line and parallel stub to remove WLAN band. We generated the 13th Gaussian pulse restricted frequency spectrum of WLAN band more than -25dB. The pulse had pulse width of 1 nsec and amplitude of 25 mV.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.1
• /
• pp.9-14
• /
• 2012

In this study, the diplexer used a separator or a combine of signals was designed and its characteristics were investigated. The diplexer consists of two fixed tuned bandpass filter such as low pass filter(LPF) and high pass filter(HPF) sharing a common part and was simulated. The diplexer with micro-strip structure was fabricated. The LPF of diplexer has insertion loss of -0.4 dB, return loss of -30 dB and 1.6 GHz cut-off frequency and HPF has insertion loss of -0.8 dB, return loss of -30 dB and 1.9 GHz cut-off frequency, respectively.