• Archives of Reconstructive Microsurgery
• /
• v.15 no.2
• /
• pp.92-100
• /
• 2006

Radial forearm free flap (RFFF) has been established itself as a versatile and widely used method for reconstruction of the head and neck, although it is still criticized for high mortality of donor site. Delayed wound healing, cosmetic deformity, vascular compromise and potentially reduced wrist function have many plastic surgeons hesitate to adapt it as a first choice in micro-reconstruction. To overcome these drawbacks, some techniques for donor-site repair such as V-Y advancement with full thickness skin graft (FTSG), application of artificial dermis ($Terudermis^{(R)}$) or acellular dermal matrix ($AlloDerm^{(R)}$), and double-opposing rhomboid transposition flap have been reported. Authors performed 4 cases of RFFF in old-aged patients of the head and neck cancer from April 2005 to February 2006. We compared the outcomes of donor site of RFFF which were resurfaced with split thickness skin graft (STSG) only and STSG overlying an $AlloDerm^{(R)}$. Patients were all males ranging from 59 to 74 years old (mean, 67.5). Three of them had tongue cancers, and the other showed hypopharyngeal cancer. All cases were pathologically confirmed as squamous cell carcinomas. We included the deep fascia into the flap, so called subfascially elevated RFFF in three cases, and in the other one, we dissected the RFFF suprafascially leaving the fascia intact. The donor site of the suprafascially elevated RFFF was resurfaced with STSG only. Among three of subfascially elevated RFFFs, donor-sites were covered with thin STSG only in one case, and STSG overlying $AlloDerm^{(R)}$ in two cases. All RFFFs were survived completely without any complication. The donor site of the suprafascially elevated RFFF was taken well with STSG only. But, the partial graft loss exposing brachioradialis and flexor carpi radialis muscle was unavoidable in all the subfascially elevated RFFFs irregardless of $AlloDerm^{(R)}$ application. Considering that many patients of the head and neck cancer are in old ages, we believe the RFFF is still a useful and versatile choice for resurfacing the head and neck region after cancer ablation. Its reliability and functional characteristics could override its criticism for donor site in old-aged cancer patients.

• Research in Plant Disease
• /
• v.15 no.3
• /
• pp.193-197
• /
• 2009

Pseudocercospora leaf spot was major disease of grape cultivar 'Campbell Early' in Korea. Leaf spot first appeared in early June and rapidly dispersed to other leaves through rainy season. Disease progress of leaf spot by Pseudocercospora vitis in plastic green house, in the two provinces (Gimje and Gimcheon), were investigated in 2007. Differences of Infected leaves (%) between cultivation systems were observed in field and plastic green house, but there was no difference between provinces. Micro environmental factors, such as temperature and relative humidity, were correlated with infected leaves by PROC REG procedure of SAS (Statistical Analysis System). As a result, regression model best described ($R^2=0.95^{**}$) the infected leaves as a function of the interaction of cumulated temperatures; Y (Infected leaves)=-7.0101+0.0496$\times$20Hcum (Cumulated hour above 20 degree)+0.0208$\times$20cum (Cumulated temperature above 20 degree)-0.2781$\times$25Hcum (Cumulated hour above 25 degree). A statistics model was shown that cumulated hour and temperature above specific degree were critical factor for Pseudocercospora leaf spot on the grapevine leaves in plastic green house.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.156-156
• /
• 2017

Most crop damages have been occurred by vermin(e.g., wild birds and herbivores) during the period between seeding and the cotyledon level. In this study, to minimize the damage by vermin and acquire the benefits such as protection against weeds and maintenance of water content in soil, immediately vinyl mulching after seeding was devised. Vinyl mulching has been generally covered with black color vinyl, that crop seeding locations cannot be detected by visible light range. Before punching vinyl, non-contact and non-destructive methods that can continuously determine the locations are necessary. In this study, a crop position detection method was studied that uses infrared thermal image sensor to determine the cotyledon position under vinyl mulch. The moving system for acquiring image arrays has been developed for continuously detecting crop locations under plastic mulching on the field. A sliding mechanical device was developed to move the sensor, which were arranged in the form of a linear array, perpendicular to the array using a micro-controller integrated with a stepping motor. The experiments were conducted while moving 4.00 cm/s speed of the IR sensor by the rotational speed of the stepping motor based on a digital pulse width modulation signal from the micro-controller. The acquired images were calibrated with the spatial image correlation. The collected data were processed using moving averaging on interpolation to determine the frame where the variance was the smallest in resolution units of 1.02 cm. For this study, the spline method was relatively faster than the other polynomial interpolation methods, because it has a lower maximum order of formulation when using a system such as the tridiagonal linear equation system which provided the capability of real-time processing. The temperature distribution corresponding to the distance between the crops was 10 cm, and the more clearly the leaf pattern of the crop was visually confirmed. The frequency difference was decreased, as the number of overlapped pixels was increased. Also the wave pattern of points where the crops were recognized were reduced.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.33 no.6
• /
• pp.459-466
• /
• 2011

Purpose: This study evaluated the capability of bone formation with silk fibroin/nano-hydroxyapatite/corn starch composite scaffold as a bone defect replacement matrix when grafted in a calvarial bone defect of rabbits $in$ $vivo$. Methods: Ten New Zealand white rabbits were used for this study and bilateral round-shaped defects were formed in the parietal bone (diameter: 8.0 mm). The silk fibroin 10% nano-hydroxyapatite/30% corn starch/60% composite scaffold was grafted into the right parietal bone (experimental group). The left side (control group) was grafted with a nano-hydroxyapatite (30%)/corn starch (70%) scaffold. The animals were sacrificed at 4 weeks and 8 weeks. A micro-computerized tomography (${\mu}CT$) of each specimen was taken. Subsequently, the specimens were decalcified and stained with Masson's trichrome for histological and histomorphometric analysis. Results: The average ${\mu}CT$ and histomorphometric measures of bone formation were higher in the control group than in the experimental group at 4 weeks and 8 weeks after surgery though not statistically significant ($P$ >0.05). Conclusion: The rabbit calvarial defect was not successfully repaired by silk fibroin/nano-hydroxyapatite/corn starch composite scaffold and may have been due to an inflammatory reaction caused by silk powder. In the future, the development of composite bone graft material based on various components should be performed with caution.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.39
• /
• pp.8.1-8.8
• /
• 2017

Background: For an effective bone graft for reconstruction of the maxillofacial region, an adequate vascular network will be required to supply blood, osteoprogenitor cells, and growth factors. We previously reported that the secretomes of bone marrow-derived mesenchymal stem cells (MSC-CM) contain numerous growth factors such as insulin-like growth factor (IGF)-1, transforming growth factor $(TGF)-{\beta}1$, and vascular endothelial growth factor (VEGF), which can affect the cellular characteristics and behavior of regenerating bone cells. We hypothesized that angiogenesis is an important step for bone regeneration, and VEGF is one of the crucial factors in MSC-CM that would enhance its osteogenic potential. In the present study, we focused on VEGF in MSC-CM and evaluated the angiogenic and osteogenic potentials of MSC-CM for bone regeneration. Methods: Cytokines in MSC-CM were measured by enzyme-linked immunosorbent assay (ELISA). Human umbilical vein endothelial cells (HUVECs) were cultured with MSC-CM or MSC-CM with anti-VEGF antibody (MSC-CM + anti-VEGF) for neutralization, and tube formation was evaluated. For the evaluation of bone and blood vessel formation with micro-computed tomography (micro-CT) and for the histological and immunohistochemical analyses, a rat calvarial bone defect model was used. Results: The concentrations of IGF-1, VEGF, and $TGF-{\beta}1$ in MSC-CM were $1515.6{\pm}211.8pg/mL$, $465.8{\pm}108.8pg/mL$, and $339.8{\pm}14.4pg/mL$, respectively. Tube formation of HUVECs, bone formation, and blood vessel formation were increased in the MSC-CM group but decreased in the MSC-CM + anti-VEGF group. Histological findings suggested that new bone formation in the entire defect was observed in the MSC-CM group although it was decreased in the MSC-CM + anti-VEGF group. Immunohistochemistry indicated that angiogenesis and migration of endogenous stem cells were much more abundant in the MSC-CM group than in the MSC-CM + anti-VEGF group. Conclusions: VEGF is considered a crucial factor in MSC-CM, and MSC-CM is proposed to be an adequate therapeutic agent for bone regeneration with angiogenesis.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.4
• /
• pp.25-29
• /
• 2015

Demand for a low-cost, high-throughput, and high-resolution patterning method for fabricating devices continues to increase. The roll-to-roll (R2R) imprint lithography technique has received a great deal of attention as a means of fabricating next-generation devices. In this paper, we propose a fabrication method for polymeric planar lightwave circuit (PLC) devices that uses R2R imprint lithography. The proposed technique uses an elastomeric polydimethylsiloxane (PDMS) mold. A Si wafer with micro patterns is used as the Si master. The PDMS mold is then replicated from the Si master. By applying a precise web tension and at a given web speed, we fabricated a micro-patterned PLC device. The insertion losses were 4.0 dB for a $1{\times}2$ optical splitter. As such, the proposed method of fabricating a PLC device by the R2R process was shown to be an effective solution.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.157-157
• /
• 2017

To minimize the damage by wild birds and acquire the benefits such as protection against weeds and maintenance of water content in soil, the mulching black color vinyl after seeding should be carried out. Non-contact and non-destructive methods that can continuously determine the locations are necessary. In this study, a crop position detection method was studied that uses infrared thermal image sensor to determine the cotyledon position under vinyl mulch. The moving system for acquiring image arrays has been developed for continuously detecting crop locations under plastic mulching on the field. A sliding mechanical device was developed to move the sensor, which were arranged in the form of a linear array, perpendicular to the array using a micro-controller integrated with a stepping motor. The experiments were conducted while moving 4.00 cm/s speed of the IR sensor by the rotational speed of the stepping motor based on a digital pulse width modulation signal from the micro-controller. The acquired images were calibrated with the spatial image correlation. The collected data were processed using moving averaging on interpolation to determine the frame where the variance was the smallest in resolution units of 1.02 cm. Non-linear integral interpolation was one of method for analyzing the frequency using the normalization image and then arbitrarily increasing the limited data value of $16{\times}4pixels$ in one frame. It was a method to relatively reduce the size of overlapping pixels by arbitrarily increasing the limited data value. The splitted frames into 0.1 units instead of 1 pixel can propose more than 10 times more accurate and original method than the existing correction method. The non-integral calibration method was conducted by applying the subdivision method to the pixels to find the optimal correction resolution based on the first reversed frequency. In order to find a correct resolution, the expected location of the first crop was indicated on near pixel 4 in the inversion frequency. For the most optimized resolution, the pixel was divided by 0.4 pixel instead of one pixel to find out where the lowest frequency exists.

• Applied Chemistry for Engineering
• /
• v.28 no.4
• /
• pp.485-489
• /
• 2017

Polyethylene terephthalate (PET) has been widely applied in polymers and packaging industries to produce synthetic fibers, films, drink bottles or food containers. Therefore, it has become one of the major plastic wastes. In this article, glycolysis known as one of the main methods in PET chemical recycling was investigated using a glycol to break down the polymer into a monomer. Glycolysis of PET and ethylene glycol was performed in a micro-tubing reactor under various conditions. The effect of glycolysis conditions on the product distribution was investigated at experimental conditions of the EG/PET ratio of 1~4, the reaction time of 15~90 min and the reaction temperature of $250{\sim}325^{\circ}C$ with Mn and Cu catalysts. The highest yield of bis (2-hydroxyethyl) terephthalate monomer (BHET) was obtained as 89.46 wt% under the condition of the reaction temperature of $300^{\circ}C$ and the time of 30 min using 10 wt% $Cu/{\gamma}-Al_2O_3$ catalyst, with the PET and ethylene glycol ratio of 1 : 2.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.4
• /
• pp.447-451
• /
• 2015

The objective of this study is to predict the structural characteristics of a heat exchanger mounted on an aircraft engine using finite element analysis. The plastic fracture and life of the heat exchanger were estimated by a thermo-mechanical analysis. Tensile tests were conducted under high temperature conditions (700, 800, 900, 1000 K) using five specimens to obtain the mechanical properties of the Inconel 625 tubes. To assess the structural characteristics of the heat exchanger, the full and partial models were applied under the operating conditions given by the thermo-mechanical and inertial load. As a result, the case, tubesheet, flange, and mounting components have a reasonable safety margin to the allowable stress assuming a fatigue strength of Inconel 625 of 10000 cycles under 1000 K.

• Journal of the Economic Geographical Society of Korea
• /
• v.3 no.1
• /
• pp.5-20
• /
• 2000

Recently as globalization of financial capital is progressed, possibility of crisis and unreliability of world economy is more growing. Korean economy required radical restructuring because of the financial crisis and the economic changes occurred in that process. This study is to explain the economic changes of Gwanagju city is produced by the financial crisis of Korean economy The most important industries are service and transportation equipment in Gwangju city. These industries began to decrease after financial crisis but machinery equipment, electrical machinery & electronics and rubber goods & plastic industry is growing relatively. Because of the decrease of service, the economy of inner city which service industry relatively agglomerated in is reducing. And agglomeration space for the optical photonics industry was built up by the upbringing policy of government on high-technology industry to overcome the economic crisis and micro industrial space such as venture building and establishment nursery center was built up. But high-technology industries have many geographical limits to embed in Gwanagju city, so there needs to construct regional innovation system for knowledge based economies