• Journal of the Korean Vacuum Society
• /
• v.10 no.3
• /
• pp.380-386
• /
• 2001

A nuclear microprobe system with adjustable precision object slits and a magnetic quadrupole doublet was designed by the beam optics simulation using a first order matrix formalism, and installed in a $30^{\circ}$ beam line connected with KIGAM 1.7 MV Tandem VDG Accelerator. Demagnification factors for x and y axis are calculated to be 25 and 4.9, respectively, and a minimum beam spot side is expected to be about 5 $\mu\textrm{m}$ for 3 MeV proton beams with a current of about 1 nA. A multi-purpose octagonal target chamber has been built to facilitate MeV ion-beam analytical techniques of PIXE, RBS, ERDA, and ion beam micro-machining. It contains X-ray and particle detectors, a zoom microscope, a Faraday cup, a 4-axis sample manipulator and a high vacuum pumping system. The system performance of the nuclear microprobe is now being tested, and automatic manipulator control and data acquisition system will be installed for routine applications of micro ion-beam analytical techniques.

• Journal of Mushroom
• /
• v.19 no.1
• /
• pp.51-55
• /
• 2021

The mineral contents of domestic and Chinese Sarcodon aspratus were analyzed for comparing the differences in the mineral contents according to the production sites. The mineral contents of 10 domestic and 10 Chinese S. aspratus were analyzed by using an atomic absorption spectrophotometer and an inductively coupled plasma mass spectrometer. The sodium, magnesium, potassium, and calcium contents of domestic S. aspratus were 170.3±44.0 mg/kg, 81.3±20.8 mg/kg, 1,123.8±274.3 mg/kg, and 12.1±4.1 mg/kg, respectively, while those of Chinese S. aspratus were 112.2±40.8 mg/kg, 297.8±20.9 mg/kg, 10,938.4±2,914.1 mg/kg, and 52.5±27.7 mg/kg, respectively. There were no significant differences in the micro mineral contents and hazardous heavy metal contents between domestic and Chinese S. aspratus, while there was a significant difference in the macro mineral contents between domestic and Chinese S. aspratus. Thus, the comparative analyses of the sodium, magnesium, potassium, and calcium contents of many domestic and Chinese S. aspratus are required to determine their production sites in the future.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.73-78
• /
• 2001

Portland cement concrete is made with coarse aggregate, fine aggregate, portland cement, water and, in some cases, selected chemical admixtures such as air-entraining agents, water reducer, superplasticizer, and so on, and mineral admixtures such as fly ash, silica fume, slags, etc. Typically, in the concrete, the coarse aggregate and fine aggregate will occupy approximately 80 percent of the total volume of the final mix. Therefore, the coarse and fine aggregates affect to the properties of the portland cement concrete. As the natural sands are drained, it is necessary and economical to utilize crushed sands(manufactured fine aggregate). It is reported that crushed sands differ from natural sands in gradation, particle shape and texture, and the micro fines in the crushed sands affect to the quality of the portland cement concrete. Therefore, the purpose of this paper is to investigate the characteristics of fresh and hardened concrete with high content of micro fines. This study provides firm data for the use of crushed sands with higher micro fines.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.111-112
• /
• 2014

This research focuses on the study that micro-crack of concrete is repaired to use self-healing technology. Self-healing concrete is widely studied in domestic and international construction field recently. Micro-crack(less than 0.3mm)of concrete is repaired using a crack repair stick which containing self-healing agents. Therefore, the crack on construction structure will be easily repaired by using a crack repair stick. Also experiment was proceeded because of evaluating the long term durability.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.353-354
• /
• 2021

In this study, in order to overcome the limitations of the particle size analysis method using a scanner, a microscope, or a laser, and to reduce the cost, a high-quality sampling of micro minerals is performed using an ultra-high-pixel DSLR camera and a MACRO lens. Using this, digital photos taken of standard mineral particles are analyzed to distinguish the size and shape of mineral particles at the level of grain of sand (a few mm ~ 0.063 mm). In addition, various photographing techniques for the production of three-dimensional images of mineral particles were sought, and an attempt was made to produce learning materials and images for mineral classification.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.5
• /
• pp.1364-1368
• /
• 2015

This study was performed to evaluate mineral contents of catfish Silurus asotus. As a result of mineral content, the mean content of the macro mineral was (in descending order): K (310.36-412.66 mg/100 g), P (186.42-223.02 mg/100 g), Na (35.32-57.87 mg/100 g), Mg (22.88-31.87 mg/100 g), Ca (9.05-13.07 mg/100 g). In comparison, the mean content of the micro mineral was (in descending order): Fe (0.26-0.95 mg/100 g), Zn (0.26-1.02 mg/100 g), Cu (ND-0.08 mg/100 g), Mn (0.01-0.03 mg/100 g). A proportion of mineral intakes with the dietary reference intakes for Koreans (KDRIs) set by the Korean Nutrition Society. Nutrient uptake proportion of mineral intakes was (in descending order): P (62.16%), K (20.71%), Mg (16.82%), Fe (13.02%), Zn (11.38%) Cu (10.94%), Na (6.59%), Ca (3.09%), Mn (0.96%). The mineral content was compared with the major protein food sources according to the Korea Health Statistics (2013) such as polished rice, pork, chicken, beef, eggs and milk. The calcium content contains; lower level of milk and eggs, chicken whereas higher levels of rice, pork and beef. Catfish has less iron content than major protein food source. Phosphorus and potassium contain higher level of major protein food sources.

• Tunnel and Underground Space
• /
• v.27 no.3
• /
• pp.172-184
• /
• 2017

The hardness and mechanical properties of the minerals in the Daejeon granite according to depths were investigated by indentation test, load-unload test, and cycle test of dynamic ultra-micro hardness. As a result of the tests, it was possible to classify into three mineral groups (Group-1, -2, -3). The Martens hardness was not significantly different between 41 m and 223 m depths in three mode tests. Nevertheless, they showed in the order of a cycle test < load-unload test < indentation test. Considering the average Martens hardness, elastic modulus, and indentation work for each mineral group, their boundaries were relatively clear. In conclusion, A relatively accurate hardness of minerals can be obtained by three mode tests of dynamic ultra-micro hardness. In addtion, it was possible to characterize the elastic modulus and the elastic-plastic properties of the minerals from the load-unload and cycle tests.

• Journal of the Korean Ceramic Society
• /
• v.23 no.2
• /
• pp.64-70
• /
• 1986

In this investigation x-ray diffraction method was mainly studied for quantitative analysis of clinker mineral composition. And also optical microscopic observation and Bogue calculation method were applied to compare with the x-ray diffraction method. In the procedure of x-ray diffraction analysis graphite monochromator automatic divergence slit and spinner for sample holder were used for minimizing the error due to the operation of the equipment. Especially the separation of overlapped peaks were proceeded by micro-processor automatically. The results of x-ray diffraction method for synthesized clinker were consistent with the Bogue value and the results of optical microscopic observation. However the results of quantitative analysis of mineral composition or commercial clinker containing solid solution of minor component were different from the Bogue value. On the other hand they agreed reasonably well with results of the optical mic-roscopic observation.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2007.06a
• /
• pp.291-296
• /
• 2007

We measured potential waveform of load, displacement, micro electric signal generated by rock and mortar fracture using PXI A/D Converter. The rock type used for measurement was used granite, limestone and sandstone, and mortar specimen. we made measuring equipment of physical properties to confirm basic information of physical properties, measured physical properties of rock engineering, electric resistivity and seismic velocity. Potential waveform system was built using PXI A/D Converter and measured potential waveform of load, displacement, micro-electric signal generated using this during uniaxial compressive test by the specimen finished such test of physical properties. Using the saturated rock and mortar specimen, micro electric signal increased, and It didn't increase a signal in dried rock and mortar specimen according as load and strain rate increases. But signal also increased in saturated or dried specimen in case of sandstone. It was possible to check the close correlation relationship the signal and fracture behavior by a compressive load as the signal of fracture position was increased bigger than the other position. It was also possible to check the correlation relationship between physical properties and micro geo-electric signal.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.3
• /
• pp.207-213
• /
• 2014

A study was carried out to fabricate the cutting tool geometry with micro/nanoscale on the single crystal diamond tool by using the FIB. The FIB technique is an ideal tool for TEM sample preparation that allows for the fabrication of electron-transparent foils. The FIB is appropriate techniques to sample and subsequently define the chemical composition and the structural state of mineral inclusion on the micro/nanoscale. The combination of FIB with a SEM allows for 3D information to be obtained from samples including 3D imaging. Cutting strategies were demonstrated to improve the performance of cutting tool geometry and to generate high aspect ratio micro cutting tool. A finely focused beam of 30keV Ga+ ions was used to mill cutting tool shapes for various micro patterns. Therefore FIB sputtering is used to shape a variety of cutting tools with dimensions in the $1-5{\mu}m$ range and cutting edge radii of curvature of under 50nm.