• 한국전자파학회논문지
• /
• 제12권1호
• /
• pp.18-26
• /
• 2001

본 논문에서는 압전체를 전기기계 압전파동방정식과 경계조건을 이용하여 고유치 제로 정식화하고, 3차원 유한요소법을 적용하여 초고주파 대역에서 동작하는 압전박막공진기의 공진모드 및 공진특성을 공진기의 입력 임피던스를 통하여 해석하였다. 이를 통하여 1차원 해석에서는 불가능하였던 공진기의 전극형상과 상, 하부 전극의 비대칭 구조에 따른 공진특성과 스퓨리어스특성을 추출하였다. 본 논문에서 제안한 방법으로 계산된 공진주파수를 Mason 등기모델 해석결과 및 실제 제작한 ZnO 압전박막공진기의 공진 특성과 비교한 결과 정확하게 일치함을 확인하였다. 또한 두께진동모드로 동작하기 위한 최적의 길이와 두께의 비가 20 : 1이고 최소한의 길이와 두께의 비가 5:1 이상임을 알 수 있었다.

• Journal of Periodontal and Implant Science
• /
• 제35권4호
• /
• pp.921-937
• /
• 2005

Mechanical and chemical methods are the two ways to treat the implant surfaces. By using mechanical method, it is difficult to eliminate bacteria and by-products from the rough implant surface and it can also cause the structural change to the implant surface. Therefore, chemical method is widely used in order to preserve and detoxicate the implant surface more effectively. The purpose of this study is to evaluate the effect of tetracylcline- HCl on the change of implant surface microstructure according to application time. Implants with pure titanium machined surface, SLA surface and $TiO_2blasted$ surface were used in this study. Implant surface was rubbed with sponge soaked in 50mg/ml tetracycline - HCl solution for $\frac{1}{2}$ min., 1min., $1\frac{1}{2}$ min., 2 min., and $2\frac{1}{2}min.$ respectively in the test group and with no treatment in the control group. The sponge was soaked in every 30 seconds. Then, the specimens were processed for scanning electron microscopic observation. Based upon the analysis of photographs by three dentists who are not related with this study, the results were obtained as follows; 1. In the pure titanium machined surfaces, the control specimen showed a more or less rough machined surface composed of alternating positive and negative lines corresponding to grooves and ridges. After treatment, machining line was more pronounced for the control specimens. but in general, test specimens were similar to control. 2. In the SLA surfaces, the control specimen showed that the macro roughness was achieved by large-grit sandblasting. Subsequently, the acid-etching process created the micro roughness, which thus was superimposed on the macro roughness. Irrespective of the application time of 50mg/ml tetracycline - HCl solution, in general, test specimens were similar to control. 3. In the $TiO_2blasted$ surfaces, the control specimen showed the rough surface With small pits. The irregularity of the $TiO_2blasted$ surfaces with 50mg/ml tetracycline - HCl solution was lessened and the flattened areas got wider after 1 minute.