• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.622-627
• /
• 2001

Microjet flows are often encountered in many industrial applications of micro-electro-mechanical systems as well as in medical engineering fields such as a transdermal drug delivery system for needle-free injection of drugs into the skin. The Reynolds numbers of such microjets are usually several orders of magnitude below those of larger-scale jets. The supersonic microjet physics with these low Reynolds numbers are not yet understood to date. Computational modeling and simulation can provide an effective predictive capability for the major features of the supersonic microjets. In the present study, computations using the axisymmetic, compressible, Navier-Stokes equations are applied to understand the supersonic microjet flow physics. The pressure ratio of the microjets is changed to obtain both the under- and over-expanded flows at the exit of the micronozzle. Sonic and supersonic microjets are simulated and compared with some experimental results available. Based on computational results, two microjets are discussed in terms of total pressure, jet decay and supersonic core length.

• Journal of the Korean Society of Visualization
• /
• v.13 no.3
• /
• pp.20-23
• /
• 2015

In this experiment, a heterogeneous droplet consisted of de-ionized water and olive oil was made through two 31G injection needles. The injection flow rate was $50{\mu}{\ell}/min$ and the droplet size was 2 mm. The droplet was impinged onto a sapphire plate which was heated up to $300^{\circ}C$ by a heater. Two high speed cameras were used for visualization, and the frame rate was 20,000 fps. A 150W metal halite lamp was used for illumination. The dropping height was fixed to 20 mm and the corresponding Weber number was 10.6 based on water. Due to different boiling points of two liquids, partial boiling features of heterogeneous droplet was observed. At the Leidenfrost condition, micro explosion phenomenon has occurred.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.4 s.181
• /
• pp.162-167
• /
• 2006

Hot embossing lithography(HEL) has the production advantage of comparatively few process step, simple operation, a relatively low cost for embossing tools(Si), and high replication accuracy for small features. In this paper, we considered the nano-molding characteristic according to molding parameters(temperature, pressure, times, etc) and induced a optimal molding condition using HEL. High precision nano-patter master with various shapes were designed and manufactured using the DRIE(Deep Reactive ion Etching), LPCVD(Low Pressure Chemical Vapor Deposition) and thermal oxidation process, and we investigated the molding characteristic of DVD and Blu-ray nickel stamp. We induced flow behaviors of polymer, rheology by shapes and sizes of the pattern through various molding experiments. Finally, with achieving nano-structure molding with high aspect ratio, we will secure a basic technology about the molding of large-area nano-pattern media.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.3 no.3
• /
• pp.264-271
• /
• 2014

Virtual synchronous generator (VSG) in single-phase to interface distributed renewable energy resources is investigated in this paper. Mathematical models and numerical analysis are utilized to illustrate the features of the VSG. Enhanced control strategy is presented to ensure the performance of the VSG. Besides, a second order generalized integer (SOGI) is employed to calculate the instantaneous output power of the VSG in virtual ${\alpha}{\beta}$ frame. By the means of a phase-locked loop based scheme, the VSG can seamlessly transform between islanded and grid-tied modes, which can meet the requirements of micro-grid. At last, the validation and the proposed approach are verified by the simulated results using PSCAD/EMTDC.

• Journal of Astronomy and Space Sciences
• /
• v.19 no.3
• /
• pp.225-230
• /
• 2002

Synthetic Aperture Radar (SAR) has been used for mapping the surface geomorphology of cloudy planets like Venus as well as the Earth. The cloud-free Mars is also going to be scanned by SAR in order to detect buried water channels and other features under the very shallow subsurface af the ground. According to the 'Mid and Long-term National Space Development Plan' of Korea, SAR satellites, in addition to the EO (Electro-Optical) satellites, are supposed to be developed in the frame of the KOMPSAT (Korean Multi-Purpose Satellite) program. Feasibility of utilizing a SAR payload on KOMPSAT platform has been studied by KARI in collaboration with Astrium U.K. The purpose of the ShR program is Scientific and Civil applications on the Earth. The study showed that KOMPSAT-2 platform can accommodate a small SAR like Astrium’s MicroSAR. In this paper, system aspects of the satellite design are presented, such as mission scenario, operation concept, and capabilities. The spacecraft design is also discussed and conclusion is followed.

• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.355-358
• /
• 1987

A design of digital position control system with DC Motor is presented. The digital position control system is constructed by power circuits, interface circuits and control circuits using single chip microprocessor (8096). All control functions are implemented on the 16 bit micro-processor requiring only on incremental encoder for speed and position sensing. The control schemes are used by the proportional control for some modifications and braking algorithms. This digital position system offered to the fast response, good steady-state accuracy, flexibility and reliability, Hardware, software features and experimental results of this system are described.

• Asian Journal of Innovation and Policy
• /
• v.1 no.1
• /
• pp.31-49
• /
• 2012

This paper is a review of a 13-year-old policy for university reform in Korea, the Brain Korea 21 Program, based on current theoretical frameworks. Current theoretical frameworks are classified into three groups: micro and macro perspectives on universities and discussion on world-class universities. The overall purpose of BK21 is to bring up high-level scholarship through manpower and achieve several targets of university reform. The program can be evaluated as a success in terms of following a research university model but not the entrepreneurial university model. However, the fact that a 13-year old policy developed under a research university model had features of the entrepreneurial university shows the direction of change that the research university is currently undergoing.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.132-137
• /
• 2004

In this work, effects of hyper-elastic rubber material properties on the indentation load-deflection curve and subindenter deformation are first examined via [mite element (FE) analyses. An optimal data acquisition spot is selected, which features maximum strain energy density and negligible frictional effect. We then contrive two normalized functions. which map an indentation load vs. deflection curve into a strain energy density vs. first invariant curve. From the strain energy density vs. first invariant curve, we can extract the rubber material properties. This new spherical indentation approach produces the rubber material properties in a manner more effective than the common uniaxial tensile/compression tests. The indentation approach successfully measures the rubber material properties and the corresponding nominal stress.strain curve with an average error less than 3%.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.1
• /
• pp.68-74
• /
• 2013

The surface enhanced Raman spectrum of juglone, a traditional natural dye, has been observed by a custom-built micro-Raman setup. The spectral features of juglone significantly differ from those of lawsone, a structural isomer of juglone; only small red shifts of the double bond stretching bands are observed, and strong SERS bands are observed in the lower frequency regions as well. The DFT computations reveal that juglone coordinated to an $Ag^+$ adatom with $H^+$ release best correlates with the observed vibrational characteristics in the SERS spectrum among the plausible configurations of juglone coordinated to an adatom on the Ag surface, in line with the previously studied lawsone case. The differences in the SERS spectra of juglone and lawsone are attributed to the different locations of the hydroxyl group in the two isomers.

• The Korean Journal of Mycology
• /
• v.44 no.3
• /
• pp.132-137
• /
• 2016

A unrecorded hyphomycete species of Phialocephala was isolated for the first time during the investigation of fungal community in the soil samples collected from different regions of Korea. The fungal isolate was identified as Phialocephala lagerbergii, based on the morphological characteristics and phylogenetic analysis of the ribosomal DNA sequence. In addition, cultural and micro-morphological features were described in detail.