• Corrosion Science and Technology
• /
• 제18권3호
• /
• pp.73-77
• /
• 2019

Hot-dip aluminized coating has been widely used to protect steel substrate against corrosion. In this study, the corrosion behavior of hot-dip aluminized type 409L (11% Cr) stainless steel (SS) was investigated using macro- and micro-scale polarization tests. An Al-Fe-Si alloy layer that was formed due to inter-diffusion of alloying elements between Al coating and SS substrate was observed between Al coating and 409L SS substrate. In both macro- and micro-scale polarization tests, the corrosion potential ($E_{corr}$) of the 409L SS substrate was much nobler than that of the Al coating and alloy layer. $E_{corr}$ of the alloy layer was between that of Al coating and 409L SS substrate. This indicates that the alloy layer can act as a buffer between the more active Al coating and the nobler SS substrate for pit growth in aluminized SS. The presence of the alloy layer appears to be helpful in hindering pitting corrosion of aluminized SS.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.644-647
• /
• 2004

Optical add/drop multiplexers (OADMs), one of the new network elements, will play a key role enabling greater connectivity and flexibility in the dense wavelength-division multiplexing (DWDM) networks. The importance of OADMs is that they allow the optical network to be local transmitting/extraction on a wavelength-by-wavelength basis to optimize traffic, efficient network utilization, network growth, and to enhance network flexibility. Also, the automatic assembly system of micro optical filters and fibers is a key technology in the development of optical modules with high functionality. Recently, one of remarkable tends in the development of optical communication industry is the miniaturization and integration of products. In this research, we have developed a system capable of automatic alignment of a film filter and a lensed fiber in order to improve the speed and losses in the optical fiber to filter alignment of optical modules. Using the developed automatic alignment system and silicon optical benches, we have fabricated the micro OADM and measured the insertion loss and aging effect.

• 대한기계학회논문집A
• /
• 제35권9호
• /
• pp.1041-1050
• /
• 2011

미크론 단위의 크기를 갖는 구조물의 소성변형에서 나타나는 길이 효과를 고려하여 유한요소 해석을 하기 위하여 변형률 구배 소성이론을 이용하는 탄소성 유한요소 모델링 및 해석법을 제안하였다. 기존의 연구에서 주로 고차, 고자유도 및 혼합요소, 초 요소 등을 필요로 하였던 것에 비하여 본 논문에서는 이들을 배제하는 변위법 저차 평면 요소 및 삼차원 요소를 도입하였다. 이는 비선형 증분 해석의 프레임워크에서 계산된 소성 변형률의 절점 평균값으로 보간하여 적분점에서의 변형률 구배를 구하고 테일러 전위 모델에 의한 변형률 경화 구성방정식을 적용하므로서 가능하였다. 제안된 방법론은 선형 삼각 및 사각요소, 선형 사면체, 육면체 요소에 대해 적용되었으며 마이크로 굽힘, 마이크로 비틀림, 마이크로 기공과 같은 대표적인 길이 스케일 문제를 통하여 수치적으로 검증하였다. 본 논문에서 제안한 방법은 계산이 매우 쉬우면서도 실험값들과 비교해 볼 때, 변형률 구배 소성이론 즉, 길이 효과를 잘 나타내어 주었다.

• 동남아시아연구
• /
• 제21권2호
• /
• pp.77-123
• /
• 2011

Recently, Southeast Asian people, its food, natural sceneries and so on have been increasingly exposed to Korean people through mass media and multi-cultural events. At the same time, Koreans can frequently encounter Southeast Asians in their everyday lives. Thus, specific images and discourses of Southeast Asia has been established in our society, which creates a new social trend called 'Southeast Asia phenomena'. In short, 'Southeast Asia phenomena' means a totality of Korean people's experience of Southeast Asian and their perception on the region. On the one hand, 'Southeast Asia phenomena' is a result of inflow of Southeast Asians and their culture into Korea. On the other hand, it is also a consequence of Korean people's understanding of Southeast Asia from their trip to Southeast Asia or from their interactions with Southeast Asian people. This article aims to analyze the origin and diffusion of 'Southeast Asian Phenomena' in Korea in the context of Southeast Asia focusing on 4 topics, that is, migrant workers, overseas investments, retirement migration, study-abroad categorized as human movement. This article is also about a country-by-country comparative analysis both at the macro level and the micro level. At the macro level, overseas investments and trade, human exchanges, positive perception to Koreans which considered to be the structural causes become a strong mechanism playing a important bridge role between Korea and Southeast Asia. So these create the high probability of the emergence of 'Southeast Asian Phenomena' At the micro level which is more direct causes of 'Southeast Asian Phenomena', the economic cause is the most important common cause for 4 Southeast Asian Phenomena. Additionally, Korean wave is also remarkable common cause creating 'Southeast Asian Phenomena' even it is not the origin in the context of Southeast Asia. The diffusion of 'Southeast Asian Phenomena' is different by the topics and the elements contributing to create the favorable situation for the diffusion are not only overseas investments and trade, human exchanges at the macro level but also policy elements at the micro level. The relative differences of the causes of 'Southeast Asian Phenomena' in the country-by-country analysis are found. Regarding overseas investments in Vietnam and Cambodia, the economic degree of freedom in Cambodia is higher than in Vietnam. Even Korean Wave has had the longer history in Vietnam, but the favorable perspectives on Korean Wave are stronger in Cambodia. For migrant workers from Vietnam and Indonesia, the economic causes in Vietnam are more significant than in Indonesia. The impact of Korean Wave is stronger in Vietnam than in Indonesia. In case of study-abroad, the social-cultural elements and policy elements are more diverse in Malaysia than in Korea. For the Korean retirees who immigrate to the Philippines and Malaysia, the economic causes in the Philippines is more significant in Malaysia.

• 한국산학기술학회논문지
• /
• 제15권7호
• /
• pp.4093-4099
• /
• 2014

본 논문에서는 200 kW급 마이크로 가스 터빈 시스템의 연소기집합체의 열-구조 연성 해석을 수행하였다. 일반적인 연소기집합체는 라이너, 내외 케이스, 버너와 노즐링 등으로 구성되어 있으며, 본 연구에서 개발된 유한요소모델은 연소기집합체 내 다양한 부품들의 다른 열팽창을 보상하기 위해 부품간의 이격과 마찰 요소들이 존재하므로 비선형 간극 및 마찰 요소 등을 포함하고 있다. 본 연구를 통해 연소기집합체의 외부 경계지지조건이 높은 온도구배로 인한 응력 에 가장 큰 영향을 주는 인자라는 것을 밝혀냈으며, 과도한 응력이나 변형을 방지하기 위한 적절한 외부 경계지지조건을 찾기 위하여 외부 경계지역에 탄성 지지조건을 가상하여 적절한 경계조건을 도출하여 설계에 사용될 수 있도록 하였다.

• 한국재료학회지
• /
• 제22권10호
• /
• pp.513-518
• /
• 2012

Recently, automobile parts have been required to have high strength and toughness to allow for weight lightening or improved stability. But, traditional micro-alloyed steel cannot be applied in automobile parts. In this study, we considered the influence of quenching temperature and cooling rate for specimens fabricated by vacuum induction furnace. Directly quenched micro-alloyed steel for hot forging can be controlled according to its micro structure and the heat-treatment process. Low carbon steel, as well as alloying elements for improvement of strength and toughness, was used to obtain optimized conditions. After hot forging at $1,200^{\circ}C$, the ideal mechanical properties (tensile strength ${\geq}$ 1,000 MPa, Charpy impact value ${\geq}\;100\;J/cm^2$) can be achieved by using optimized conditions (quenching temperature : 925 to $1,050^{\circ}C$, cooling rate : ${\geq}\;5^{\circ}C/sec$). The difference of impact value according to cooling rate can be influenced by the microstructure. A fine lath martensite micro structure is formed at a cooling rate of over $5^{\circ}C/sec$. On the other hand, the second phase of the M-A constituent microstructure is the cause of crack initiation under the cooling rate of $5^{\circ}C/sec$.

• 보존과학회지
• /
• 제35권2호
• /
• pp.145-152
• /
• 2019

The metal-manufacturing method and smelting temperature of ancient metal-production processes have been studied by analyzing the principal elements and microstructures of slag. However, the microstructure of slag varies according to the solidification cooling rate and types and relative amounts of various oxides contained within the smelting materials. Hence, there is a need for accurate analysis methods that allow slag to be distinguished by more than its composition or microstructure. In this study, the microstructures of slag discharged as a result of smelting iron sands collected from Pohang and Gyeongju, as well as the slag excavated from the Ungyo site in Wanju, were analyzed by using metalloscopy, scanning election microscopy-energy dispersine X-ray spectroscopy(SEM-EDS) and wavelength dispersive X-ray fluorenscence(WD-XRF). Furthermore, the microcrystals were accurately characterized by performing Raman micro-spectroscopy, which is a technique that can be used to identify the microcrystals of slags. SEM-EDS analysis of Pohang slag indicated that its white polygonal crystals could be Magnetite; however, Raman micro-spectroscopy revealed that these crystals were actually $ulv{\ddot{o}}spinel$. Raman micro-spectroscopy and SEM-EDS were also used to verify that the coarse white dendritic structures observed in the Gyeongju-slag were $W{\ddot{u}}stites$. Additionally, the Wanju slag was observed to have a glassy matrix, which was confirmed by Raman micro-spectroscopy to be Augite. Thus, we have demonstrated that Raman micro-spectroscopy can accurately identify slag microcrystals, which are otherwise difficult to distinguish as solely based on their chemical composition and crystal morphology. Therefore, we conclude that it has excellent potential as a slag analysis technique.

• 한국주조공학회지
• /
• 제35권5호
• /
• pp.120-127
• /
• 2015

The effects of Ti, B and Zr on grain refinement and castability were investigated in Al-4wt%Mg-0.9wt%Si-0.3wt%Mn-0.15wt%Fe alloy. Measurement of cooling curve and micro-structure observation were performed to analyze the effects of the addition of minor elements Ti, B and Zr during solidification. The prominence of effect on grain refinement was in increasing order for Ti, Zr and B element. Fine grain size and an increase of the crystallization temperature for ${\alpha}$-Al solution were evident as the amount of addition elements increased in this study. Addition of 0.15wt% Ti was most effective for grain refinement, and the resulting grain size of ${\alpha}$-Al solution for shell mold and steel mold were $72.3{\mu}m$ and $23.5{\mu}m$, respectively. Fluidity and shrinkage tests were perform to evaluate the castability of the alloy. Maximum fluidity length and minimum ratio of micro shrinkage were recorded for 0.15wt% Ti addition due to the effect of the finest grain size.

• 한국패류학회지
• /
• 제25권1호
• /
• pp.81-89
• /
• 2009

본 연구에서 우리는 다양한 컬러의 담수양식진주(화이트, 오렌지, 퍼플 등)을 사용하여, 담수진주의 컬러를 변화시켜 가치향상을 목적으로 다양한 온도 및 시간별로 열처리를 실시하였다. 진주의 손상을 최대한 막고 컬러를 향상시킬 수 있는 최적의 조건(온도 및 시간)을 정립하여, 그에 따른 진주의 컬러변화, 광택, 성분분석, 내부구조 등의 변화를 UV-Vis, ED-XRF, SEM 등을 사용하여 비교 관찰하였다. 결론적으로 우리는 열처리를 통하여 담수양식진주의 컬러와 광택 및 상품가치를 높일 수 있는 가장 적합한 조건을 제시하고자 하였다.

• Composites Research
• /
• 제31권5호
• /
• pp.251-259
• /
• 2018

본 논문에서는 섬유강화복합재의 멀티스케일 해석을 위해 필요한 대규모/소규모 통계적 체적요소 모델을 개발하였다. 미시영역모델의 크기효과를 최소화하기 위해서 섬유를 최대한 포함한 거대모델을 구성하였다. 이를 위해 국부 영역의 요소 절단법을 이용하여 전체 유한요소 크기에 상관없이 신속한 격자 섬유/기지의 모델링이 가능한 요소생성기를 구성하였다. 이를 통해 대규모 통계 체적 모델을 도출하여 체적모델의 크기에 따른 국부하중 공유의 차이를 고찰하고, 섬유방향의 연속체손상역학모델을 BSVEs 모델 해석으로부터 도출 하였다. BSVEs 모델을 보편적인 RVE모델과 비교 검증하였다.