• 한국전자파학회지:전자파기술
• /
• 제12권3호
• /
• pp.60-68
• /
• 2001

본 논문에서는 최근 초소형 기술로 각광받고 있는 MEMS(MicroElectroMechanical System) 기술을 이용한 무선통신 분야의 응용을 제고한다. RF ME- MS 기술은 기존의 기술들에 비해 크기나 전력소모, 삽입손실 등에서 우수한 고주파 특성을 갖는 소자 나 부품을 만들 수 있으며 특히 휴대용 단말기에 적 용 가능한 RE 부품들 즉 저손실 전송선로, 스위치, High Q inductor, 안테나 등의 주요 부품에 대한 연 구가 많이 이루어지고 있다.

• 전력전자학회지
• /
• 제14권1호
• /
• pp.26-33
• /
• 2009

광대역 반도체중에서도 SiC(Silicon Carbide)는 우수한 전기적, 기계적, 열적, 화학적, 광학적 그리고 생체 적합성 등으로 인하여 지난 반세기 동안 급속히 발전하고 있는 SiM/NEMS(Micro/Nano Electro Mechanical System)를 대처할 수 있는 차세대 M/NEMS로써 고온, 고압, 고진동, 고습도 등의 극한 환경에서도 사용 가능한 자동차, 선박, 우주항공, 산업 프랜트용 마이크로 센서 및 액츄에이터, 초고주파수 정보통신용 부품 그리고 바이오 센서 등의 분야에 크게 주목을 받고 있다. 본 논문에서는 현재 SiC M/NEMS의 연구개발 현황에 대해서 소개하고자 한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.39.1-39
• /
• 2002

We present nanoactuators and nanodetectors for high-precision Micro Electro Mechanical System (MEMS) applications. Major technical difficulties in the high-precision MEMS are arising from the fabrication uncertainty and electrical noise problems. In this paper, we present high-precision actuators and detectors, overcoming the technical limitations placed by the conventional MEMS technology. For the nano-precision actuation, we present a nonlinearly modulated digital actuator (NMDA). NMDA composed of a digital microactuator and a nonlinear micromechanical modulator. The nonlinear micromechanical modulator is intended to purify the actuation errors in the stroke of the digital a...

• 한국광학회:학술대회논문집
• /
• 한국광학회 2003년도 제14회 정기총회 및 03년 동계학술발표회
• /
• pp.276-277
• /
• 2003

전체 반도체 소자 제조 공정의 40 ％를 차지하고 있는 리소그래피 기술은 기억 소자뿐만 아니라 마이크로 프로세서, ASIC 등의 실리콘 소자와 군사 및 통신에 많이 사용되고 있는 화합물 반도체를 만드는 데도 쓰이고 있고, 요즈음은 DRAM 의 리소그래피 기술들을 LCD 등의 평판 표시 장치, 디스크 헤드, 프린터 헤드 및 MEMS(Micro-Electro-Mechanical System), 나노 바이오 칩 등의 제작에 응용하여 쓰고 있다. 리소그래피 기술은 생산 원가 면에서 제일 큰 비중을 차지하고 있을 뿐만 아니라 집적소자의 초고집적화 및 초미세화를 선도하는 기술이다. (중략)

• 한국항공우주학회지
• /
• 제31권7호
• /
• pp.53-62
• /
• 2003

• The Journal of Korean Physical Therapy
• /
• 제31권6호
• /
• pp.333-338
• /
• 2019

Purpose: Although previous studies on the screw-home movement (SHM) for autopsy specimen and walking of living persons conducted, the possibility of acquiring SHM based on inertial measurement units received little attention. This study aimed to investigate the possibility of measuring SHM for the non-weighted bearing using a micro-electro-mechanical system-based wearable motion capture system (MEMSS). Methods: MEMSS and camera-based motion analysis systems were used to obtain kinematic data of the knee joint. The knee joint moved from the flexion position to a fully extended position and then back to the start point. The coefficient of multiple correlation and the difference in the range of motion were used to assess the waveform similarity in the movement measured by two measurement systems. Results: The waveform similarity in the sagittal plane was excellent and the in the transverse plane was good. Significant differences were found in the sagittal plane between the two systems (p<0.05). However, there was no significant difference in the transverse plane between the two systems (p>0.05). Conclusion: The SHM during the passive motion without muscle contraction in the non-weighted bearing appeared in the entire range. We thought that the MEMSS could be easily applied to the acquisition of biomechanical data on the knee related to physical therapy.

• Journal of Mechanical Science and Technology
• /
• 제18권5호
• /
• pp.798-807
• /
• 2004

A testing system was developed to improve the reliability of printhead and several printheads were tested. We developed a thermally driven monolithic inkjet printhead comprising dome-shaped ink chambers, thin film nozzle guides, and omega-shaped heaters integrated on the top surface of each chamber. To perform a fatigue test of an inkjet printhead, the testing system automatically detects a heating failure using a Wheatstone bridge circuit. Various models were designed and tested to develop a more reliable printhead. Two design parameters of the width of reinforcing layer and heater were investigated in the test. Specially., the reinforcing layer was introduced to improve the fatigue life of printhead. The life-span of heater with a reinforcing layer was longer than that without a reinforcing layer. The wider the heater was, the longer the life of printhead was.

• 한국항공우주학회지
• /
• 제31권2호
• /
• pp.57-62
• /
• 2003

MEMS(미소전기기계시스템) 박막의 푸와송비 측정을 위한 미소굽힙기법이 제안되었다. 푸와송비 측정에 민감한 쌍원시편(두 개의 원모양)을 설계하고 표면미세가공 공정을 사용하여 제작하였다. 미소압입기로 하중을 가한 쌍원시편의 하중-변위 곡선을 분석하여 푸와송비를 측정할 수 있었다. 제안도니 미소굽힘기법은 표면미세가공에 적합하여 소자제작과정에서의 동시측정이 가능하고(in-situ measurement), 소자가 위치해 있는 작은 영영에서의 물성을 국부적으로 측정할 수 있는 장점이 있다. 제안된 기법을 검증하기 위하여 저압화학기상증착법에 의하여 증착된 2.3㎛ 다결정실리콘(Poly-silicon)의 푸와송비를 측정하였다. 실험에 사용된 다결정실리콘막의 푸와송비는 0.2569 이고 쌍원시편의 강성에 대한 측정표준편차는 2.66% 이었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.467-470
• /
• 2004

Diamond-Like Carbon (DLC) thin film is a semiconductor with high mechanical hardness, low friction coefficient, high chemical inertness, and optical transparency. DLC thin films have widespread applications as protective coatings and solid lubricant coatings in areas such as Hard Disk Drive (HDD) and Micro-Electro-Mechanical-Systems (MEMS). In this work, the wear characteristics of DLC thin films deposited on silicon substrates using a DC-magnetron sputtering system were analyzed. The wear tracks were measured with an Atomic Force Microscope (AFM). To identify the sp2 and sp3 hybridization of carbon bonds and other bonds Raman spectroscopy was used. The structural information of DLC thin films was obtained with Fourier transform infrared spectroscopy and wear tests were conducted by using a micro-pin-on-reciprocator tester. Results showed that the wear characteristics were dependent on the sputtering conditions. The wear rate could be correlated with the bonding state of the DLC thin film.

• 센서학회지
• /
• 제19권4호
• /
• pp.259-270
• /
• 2010

MEMS(micro electro mechanical systems) is a technology for the manufacture hyperfine structure, as a micro-sensor and a driving device, by a variety of materials such as silicon and polymer. Many study for utilizing the MEMS applications have been performed in variety of fields, such as light devices, high frequency equipments, bio-technology, energy applications and other applications. Especially, the field of Bio-MEMS related with bio-technology is very attractive, because it have the potential technology for the miniaturization of the medical diagnosis system. Bio-MEMS, the compound word formed from the words 'Bio-technology' and 'MEMS', is hyperfine devices to analyze biological signals in vitro or in vivo. It is extending the range of its application area, by combination with nano-technology(NT), Information Technology(IT). The LOC(lab-on-a-chip) in Bio-MEMS, the comprehensive measurement system combined with Micro fluidic systems, bio-sensors and bio-materials, is the representative technology for the miniaturization of the medical diagnosis system. Therefore, many researchers around the world are performing research on this area. In this paper, the application, development and market trends of Bio-MEMS are investigated.