• 한국유기농업학회지
• /
• 제17권3호
• /
• pp.307-326
• /
• 2009

The present study suggests a concept of resources circulation type agriculture and a concept of a livestock zone related to it and evaluated economical efficiency about a possibility of the resources circulation type livestock zone based on the concept. As a result, when the resources circulation type livestock zone is operated in an area of 1,300ha, it was evaluated that the profit of 11,244 hundred thousand won per year is generated, compared to the conventional agriculture. When light and heat expenses and roughage of Hanwoo production, production of TMR forage as well as income of the energy and composting business of livestock manure at the recycling center were considered in addition to that, it was judged that the present zone development bushiness has enough business feasibility. However, it is necessary that the support regulations, etc. is constructed so that all produced compost byproducts are used at farmhouses and the system related to facility investment assurance and assistance of operating expenses is maintained. It is thought that the complement of a system is also necessary so that energy or power generation expenses can be operated in the same conditions as other new & renewable energy, and the nation's purchase of carbon credits(CDM) is investigated and systemized in the early period, and construction of a revitalization plan of the business through budget securing of the Ministry of Agriculture and Forestry related to the trade of CDM and carbon emission rights is also a business that should be urgently developed. In the future, the change of an outside environment will further promote use of the energy. Also, as people, who don't know agriculture. farm village, increase day by day because of population concentration in a city, an opportunity that can new added value through experience tourism or educational programs utilizing them is increasing. Accordingly, if programs utilizing social characteristics, such as utilization as a space of tourism. leisure. experience, system construction of bio-energy and system construction that Micro Grid or Smart Grid as a dispersed storage and generation system is stabilized, are constructed, it can be said that revitalization or success conditions of the zone is further achieved.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.68-68
• /
• 2011

As feature size is smaller, new technology are needed in semiconductor factory such as gap-fill technology for sub 100nm, development of ALD equipment for Cu barrier/seed, oxide trench etcher technology for 25 nm and beyond, development of high throughput Cu CMP equipment for 30nm and development of poly etcher for 25 nm and so on. We are focus on gap-fill technology for sub-30nm. There are many problems, which are leaning, over-hang, void, micro-pore, delaminate, thickness limitation, squeeze-in, squeeze-out and thinning phenomenon in sub-30 nm gap fill. New gap-fill processes, which are viscous oxide-SOD (spin on dielectric), O3-TEOS, NF3 Based HDP and Flowable oxide have been attempting to overcome these problems. Some groups investigated SOD process. Because gap-fill performance of SOD is best and process parameter is simple. Nevertheless these advantages, SOD processes have some problems. First, material cost is high. Second, density of SOD is too low. Therefore annealing and curing process certainly necessary to get hard density film. On the other hand, film density by Flowable oxide process is higher than film density by SOD process. Therefore, we are focus on Flowable oxide. In this work, dielectric film were deposited by PECVD with TSA(Trisilylamine - N(SiH3)3) and NH3. To get flow-ability, the effect of plasma treatment was investigated as function of O2 plasma power. QMS (quadruple mass spectrometry) and FTIR was used to analysis mechanism. Gap-filling performance and flow ability was confirmed by various patterns.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.73-73
• /
• 2011

We will report a few methods to improve the efficiency and stability in small molecule based organic solar cells, including the formation of bulk heterojunctions (BHJs) through alternative thermal deposition (ATD), the use of a micro-cavity structure and interface modifications. By ATD which is a simple modification of conventional thermal evaporation, the thicknesses of alternative donor and acceptor layers were precisely controlled down to 0.1 nm, which is critical to form BHJs. The formation of a BHJ in copper(II) phthalocyanine (CuPc) and fullerene (C60) systems was confirmed by AFM, GISAXS and absorption measurements. From analysis of the data, we found that the CuPc|C60 films fabricated by ATD were composed of the nanometer sized disk shaped CuPc nano grains and aggregated C60, which explains the phase separation of CuPc and C60. On the other hand, the co-deposited CuPc:C60 films did not show the existence of separated CuPc nano grains in the CuPc:C60 matrix. The OPV cells fabricated using the ATD method showed significantly enhanced power conversion efficiency compared to the co-deposited OPV cells under a same composition [1]. We will also present by numerical simulation that adoption of microcavity structure in the planar heterojunction can improve the short circuit current in single and tandem OSCs [2]. Interface modifications also allowed us to achieve high efficiency and high stability OSCs.

• 한국항공우주학회지
• /
• 제34권1호
• /
• pp.56-64
• /
• 2006

본 논문에서는 전도성 형상기억폴리우레탄 (CSMPU)의 개발과 응용 방법이 연구되었다. 일반적인 형상기억폴리우레탄이 외부 열원에 의해 작동되어 온 반면에, 2004년에 소개된 전도성 형상기억폴리우레탄은 전력에 의해 작동되었다. 전도성 형상기억폴리우레탄 작동기는 일반적인 형상기억폴리우레탄에 카본 나노 튜브를 첨가함으로써 제작되었다. 2004년 연구에서 제작된 전도성 형상기억폴리우레탄이 지닌 핵심 문제점은 카본 나노 튜브의 낮은 분산도였다. 이 논문에서는 분산 문제 해결을 시도하였으며, 일련의 정교한 작업을 통해 향상된 전기적 특성을 지닌 전도성 형상기억폴리우레탄 작동기를 개발하였다. 그리고 개발된 전도성 형상기억폴리우레탄 작동기의 작동 성능을 측정 및 평가하였으며, 초소형비행체 조종면의 제어 실험을 통하여 응용 가능성을 검토하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제18권1호
• /
• pp.160-165
• /
• 2014

본 연구에서는 MEMS 기반 3축 가속도 센서 모듈을 제작하여 성능 시험을 수행하였고, 지진 모니터링 시스템을 구성하였다. 3축 가속도 센서 모듈의 성능 향상을 위하여 데이터 수집장치를 24bit ADC (Analog to Digital Converter)가 내장된 NI-9239를 사용하였고, 잡음을 줄이기 위해 100Hz LPF (Low Pass Filter)를 통과시킨 데이터를 사용하였다. 또한 지진 모니터링 소프트웨어를 개발하여 구조물에 유의한 진동을 감지하는데 초점을 맞추었다. 진동을 감지하기 위한 방법으로 각 축의 가속도 크기 뿐만 아니라 3축 가속도의 벡터 합을 구하여 이 벡터 합이 미리 설정한 값을 초과할 때의 수치를 별도로 표시하고 이를 파일로 저장하는 알고리즘을 사용하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권5호
• /
• pp.119-126
• /
• 2018

최근 화력발전소에서는 순환유동층 연소방식의 발전소가 증가하는 추세이다. 순환유동층 보일러애시는 탈황 효과를 위해 석회석을 첨가함에 따라 애시 중에 포함되는 CaO, $SO_3$성분이 증가하여 일반적인 플라이애시 보다 free-CaO 함량이 높다. 또한 순환유동층 보일러애시는 기존의 플라이애시와 다르게 자기수경성 특성과, 높은 free-CaO함량에 의해 물과 만나면 높은 반응성을 갖는다. 본 연구는 순환유동층 보일러애시의 자기수경성 특성을 이용하여, 시멘트를 대체할 수 있는 비소성 결합재로써 활용 가능성에 대해 분석하였다. 순환유동층 보일러 애시의 함량에 따른 역학적 및 수화특성에 대해 검토하였다. 또한 석고의 종류 및 함유량에 따른 순환유동층 보일러애시 활용 비소성 결합재에 대한 압축강도 및 미세구조에 미치는 영향을 분석하였다.

• 한국건축시공학회지
• /
• 제11권4호
• /
• pp.363-370
• /
• 2011

본 연구에서는 화력발전소에서 발생하는 폐기물인 리젝트 애시를 자원화하기 위하여 시멘트 혼합재로 사용하는 방안을 검토하고자 하였다. 이를 위하여 포졸란 활성도 비교를 통하여 효율적인 리젝트애시의 분말도를 선정하였으며, 현재 널리 사용되고 있는 콘크리트용 혼합재인 플라이애시와 비교하였다. 고분말 리젝트애시와 플라이애시를 슬래그시멘트와 혼합하여 시멘트복합체를 제조하였으며, 제조한 시멘트복합체 및 고분말 리젝트애시의 성능 평가를 위하여 페이스트(응결, 유동성, 기기분석), 모르타르(압축강도) 실험을 실시하였다. 기기분석 결과 고분말 리젝트애시의 수화반응기구는 플라이애시와 유사하지만 미세조직이 치밀해지는 특성을 나타내었다. 물성 측정결과에서는 고분말 리젝트애시가 플라이애시와 비교하여 응결지연이 감소하고, 초기강도 및 장기강도에서 우수한 성능을 나타내었다. 따라서 리젝트애시의 분말도를 $6,000cm^2$/g 수준으로 상향시킨다면 시멘트 복합체에 활용하는 것이 가능하며, 시멘트 물성 향상에도 기여할 수 있을 것으로 예상된다.

• Carbon letters
• /
• 제16권2호
• /
• pp.78-85
• /
• 2015

Activated carbons (ACs) were prepared by activation of coal tar pitch (CTP) in the range of $700^{\circ}C-1000^{\circ}C$ for 1-4 h using potassium hydroxide (KOH) powder as the activation agent. The optimal activation conditions were determined to be a CTP/KOH ratio of 1:4, activation temperature of $900^{\circ}C$, and activation time of 3 h. The obtained ACs showed increased pore size distribution in the range of 1 to 2 nm and the highest specific capacitance of 122 F/g in a two-electrode system with an organic electrolyte, as measured by a charge-discharge method in the voltage range of 0-2.7 V. In order to improve the performance of the electric double-layer capacitor electrode, various mixtures of CTP and petroleum pitch (PP) were activated at the optimal activation conditions previously determined for CTP. Although the specific capacitance of AC electrodes prepared from CTP only and the mixtures of CTP and PP was not significantly different at a current density of 1 A/g, the AC electrodes from CTP and PP mixtures showed outstanding specific capacitance at higher current rates. In particular, CTP-PP61 (6:1 mixture) had the highest specific capacitance of 132 F/g, and the specific capacitance remained above 90% at a high current density of 3 A/g. It was found that the high specific capacitance could be attributed to the increased micro-pore volume of ACs with pore sizes from 1 to 2 nm, and the high power density could be attributed to the increased meso-pore volume.

• 한국태양에너지학회 논문집
• /
• 제29권2호
• /
• pp.1-7
• /
• 2009

Use of the PV(photovoltaic) generation system is increased in such areas as remote mountain places or islands at which electrical energy is not serviced. The stand alone PV system is required the power storage products such as battery, fly wheel and super capacitor. Several lead storage batteries are connected in series to get high voltages. The life of lead storage battery is shortened when over charge or over discharge takes place. So, it is needed to control batteries not to be overcharged or be discharged deeply. Voltage of each battery was ignored in former control methods in which overall voltage was used to control charge or discharge battery. In this study, the charging and discharging voltage variations of sealed lead storage batteries with l2V/l.2A were investigated step by step experiments. The results of the test show that one should consider and specify the state of each battery to prevent overcharge or deep discharge. With the basis of the experiments, we designed a monitoring unit to monitor battery voltages simultaneously using micro-controller. The unit measures voltage of 20 batteries simultaneously and displays data on the color LCD monitor with curved line graph. It also sends data to PC using the RS232C communication port. The designed unit was adapted to stand alone PV system with 1kW capacity and lead storage batteries are connected to the PV generation system. The number of lead storage batteries was 10 in series and 12V/250Ah each. Resistive load with 3kW was used for discharging.

• 한국광학회지
• /
• 제15권5호
• /
• pp.423-428
• /
• 2004

320${\times}$240 배열의 중적외선 대역(3.7 $\mu\textrm{m}$∼4.8 $\mu\textrm{m}$) MCT(HgCdTe) 검출기를 이용하여 분해능과 신뢰도가 대폭 향상된 소형$.$고성능의 적외선 열상센서를 설계, 제작하였다. 개발된 열상센서는 1∼20배의 고배율 줌 광학계로 설계하고 미세주사 기법을 적용하여 640${\times}$480의 화소를 재현하여 항공기의 항법 보조로부터 표적획득에 이르기까지 다양한 활용이 가능하다. 적용된 적외선 줌 광학계는 릴레이 형태의 재결상계로 설계되었으며 미세주사 장치의 개발로 7.6 cycles/mrad 까지 분해가 가능하며 최저배율에서 40$^{\circ}$${\times}$30$^{\circ}$의 초광각(super wide field of view)의 시계를 갖는다. 또한 불균일 보정기법과 히스토그램 가변방식의 결합을 통한 첨단 열 영상처리 기법을 제안하여 열상센서에 적용함으로써 고성능의 실시간 디지털 영상처리를 가능케 하였다. 본 신호처리기의 개발을 통해 획득된 열영상의 최소분해가능 온도차는 고배율에서 0.05K(＠1cycles/mrad) 이하의 우수한 결과를 보였다.