• 대한소아치과학회지
• /
• 제29권4호
• /
• pp.529-538
• /
• 2002

불소의 항우식 작용에 대해서는 논란의 여지가 없으며, 소아치과 임상에서 다량의 불소를 함유하고 있는 글라스 아이오노머는 이러한 이유로 선호되고 있다. 유리된 불소가 인접 법랑질의 항우식 효과에 미치는 영향을 평가하기 위하여 in situ 모형을 제작하고, 불소의 침투 경로와 범위 그리고 재광화 정도를 평가하기 위하여 미세 경도 측정법, 편광 현미경 관찰 및 전자 탐침 미소 분석 (EPMA, Electron Probe Micro-Analysis)을 시행하였다. 전통적인 글라스 아이오노머인 Fuji $IX^{(R)}$과 불소를 포함하지 않은 복합 레진인 $Z-100^{(R)}$을 선정하여 미세 경도치의 변화를 분석한 결과, 복합레진에 비해 글라스 아이오노머에 의한 재광화가 가속화됨을 알 수 있었다. 편광 현미경 소견의 변화를 관찰한 결과 구강내 환경에서도 초기 법랑질 우식증이 재광화될 수 있음을 확인하였고, 이러한 과정은 불소에 의해 촉진될 수 있음을 재삼 확인하였다. 전자 탐침 미소 분석 (EPMA) 관찰 결과, 구강내 환경에서 병소 본체 크기 감소를 관찰할 수 있었으며 불소에 의해 가속화됨을 확인하였다. 불소 분포 관찰 결과 농도가 기저부에서 증가하였으며 이는 기저부가 항우식 작용에 중요한 역할을 하는 것으로 생각되었다. 이상의 결과를 종합해 볼 때, 초기 법랑질 우식증은 구강내 환경에서 타액에 의해 재광화될 수 있으며, 이러한 과정은 인접치아에 충전된 글라스 아이오노머로부터 유리된 불소에 의해 더욱 가속화될 수 있음을 알 수 있었다. 글라스 아이오노머로부터 유리된 불소는 병소 본체 기저부에 침착되어 항우식 작용에 중요한 역할을 한다고 판단되며 이를 위해서는 건전 표층의 존재가 매우 중요한 것으로 사료된다.

• 한국전자통신학회논문지
• /
• 제12권5호
• /
• pp.731-736
• /
• 2017

본 논문에서는 광통신용 공진기에 필요한 광섬유의 오목한 면 제작에 관한 연구를 진행하였다. 불산(Hydrofluoric acid) 용액과 이 용액에 잘 흡수될 수 있는 파장인 $1.55{\mu}m$의 레이저를 인가하여 광열효과를 유도하였고, 식각 용액에서의 광열효과를 통해 광섬유 끝단의 곡률 반경을 자유롭게 변경할 수 있는 점을 현미경 사진 촬영으로 확인하였다. 빔 프로파일러를 이용하여 제작한 결과물의 끝단에서 방사되는 빔의 크기 변화를 관측하여 유효성을 검증하였고 본 논문의 저자들은 제시한 방식이 광통신용 공진기에 적용 가능성이 있을 것으로 보고 있다.

• 한국정밀공학회지
• /
• 제19권12호
• /
• pp.120-126
• /
• 2002

The needs of ultra-precisely machined parts are increasing more and more. But the experimental data required to ultra precision machining of nonferrous metal is insufficient. The behavior of cutting in micro cutting area is different from that of traditional cutting because of the size effect. Copper is widely used as optical parts such as LASER reflector's mirror and multimedia instrument. In experimental, after oxygen-free copper is machined by ultra precision machine with natural mono crystal diamond tool (NCD) and synthetic poly crystal diamond tool (PCD), we compared chip formation and tool's wear according to used tool. Also, we researched optimized cutting condition with the results measured according to cutting condition such as spindle speed, feed rate and depth of cut. As a result, the optimal working condition that makes good surface roughness is obtained. The surface roughness is good when spindle speed is above 80 m/min, and feed rate is small and depth of cut is above 0.5 ${\mu}{\textrm}{m}$. In cutting of klystron anode and cavity 3.2 nmRa of surface roughness is obtained.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 추계학술대회
• /
• pp.380-384
• /
• 1997

This study was performed to understand the exogenous-water-drop induced thermomechanical effect on the tooth in the free-running Er:YAG laser mode for the proper use of water as a laser energy absorber and coolant in dentistry. The ree-running Er:YAG laser was used in the dental hard tissue ablation study. A Microjet system was employed to dispense precise water drops. Ablation rate, recoil momentum, and temperature rise in the pulp cavity were measured with and without an exogenous water drop on the tooth surface. Exogenous water enhanced ablation rate in the thick tooth in which the ablation rate on the dry surface does not increase linearly but shows plateau. Optimal exogenous water volume was shifted from 2 nl to 4 nl as the laser energy was increased from 48 mJ to 145 mJ. The magnitude of the recoil momentum was increased as the volume of exogenous water increased. The results of this study suggest that we must pay attention to the recoil momentum or recoil pressure study or the optimal and safe usage of water in the dental treatment because these mechanical effects depend on the volume of exogenous water on the tooth surface.

• 전기학회논문지
• /
• 제59권2호
• /
• pp.390-396
• /
• 2010

An 80MHz surface acoustic wave (SAW)-based gyroscope utilizing a progressive wave was developed on a piezoelectric substrate. The developed sensor consists of two SAW oscillators in which one is used for sensing element and has metallic dots in the cavity between input and output IDTs. The other is used for a reference element. Coupling of mode (COM) modeling was conducted to determine the optimal device parameters prior to fabrication. According to the simulation results, the device was fabricated and then measured on a rate table. When the device was subjected to an angular rotation, oscillation frequency differences between the two oscillators were observed because of the Coriolis force acting on the metallic dots. Depending on the angular rate, the difference of the oscillation frequency was modulated. The obtained sensitivity was approximately 52.35 Hz/deg.s within the angular rate range of 0~1000 deg/s. The performances of devices with three IDT structures for two kinds of piezoelectric substrates were characterized. Good thermal stability was also observed during the evaluation process.

• 한국표면공학회지
• /
• 제48권3호
• /
• pp.105-109
• /
• 2015

We studied emission characteristics of blue fluorescent multi-tandem OLEDs using $Al/MoO_x$ as charge generation layer(CGL). Threshold voltage for 2, 3, 4, and 5 units tandem OLEDs was 8, 11, 14 and 18 V, respectively. The threshold voltage in multi-tandem OLEDs was lower than multiple of 4 V for the single OLED. Maximum current efficiency and maximum quantum efficiency of single OLED were 7.6 cd/A and 5.5%. Maximum current efficiency for 2, 3, 4, and 5 units tandem OLEDs was 22.6, 31.4, 41.2, and 46.6 cd/A, respectively. Maximum quantum efficiency for 2, 3, 4, and 5 units tandem OLEDs was 11.8, 15.8, 21.8, and 25.6%, respectively. The maximum current efficiency and maximum quantum efficiency in multi-tandem OLEDs were higher than multiple of those for the single OLED. The intensity for 508 nm peak was changed and the peak wavelength was red shift by increase of tandem unit in electroluminescent emission spectra. These phenomena can be caused by micro-cavity effect with increasing of organic layer thickness.

• 한국지반공학회논문집
• /
• 제24권2호
• /
• pp.67-75
• /
• 2008

개별요소방법은 재료의 미시적 거동 및 불연속적 거동과 관련하여 지반공학 분야에서 그 활용이 증가하고 있으나, 기존 개별요소 방법들은 입자형태의 재료들간 상호작용을 위주로 연구되었으며, 이는 지반공학 분야에 개별요소 방법을 제한적으로 적용하는 주요 원인이 되었다. 최근 기존 개별요소 방법에 흙, 암반 및 투수성 매질에서의 물 흐름을 고려한 수리연동 기법의 적용연구(Kawaguchi et al., 2003; Shimizu, 2004)가 진행되고 있다. 본 연구에서는 기존 개별요소방법에 수리연동 기법을 적용하여 수압조건별 지반의 공동생성 및 확장에 대한 수치해석을 실시하였다. 직사각형 해석요소에 입자크기와 초기 간극률 조건에 대한 개별요소 및 경계면 생성 후, 서보 제어방법을 통한 경계면 응력조건을 구현하였다. 수리거동의 고려는 연속방정식과 Navier-Stokes 방정식을 이용하여 압력과 속도를 구한 후, 입자와 유수간의 상호작용을 풀어가는 방식(Tsuji, 1993)으로 수행하였다. 구속압 조건($0.1MP{\alpha},\;0.5MP{\alpha}$)에 대하여 해석모델 중앙지점에 7단계로 증가되는 수평방향 유속을 재하하고, 재하지점 인근의 개별요소 이동 및 지점별 유량, 유속, 압력, 경계면 응력변화 등을 분석하였으며, 해석조건에 따라 개별요소와 수리 영향의 상호거동을 통한 공동생성 및 확장, 한계압력 발생 등을 확인하였다.

• 대한치과보철학회지
• /
• 제46권3호
• /
• pp.298-306
• /
• 2008

STATEMENT OF PROBLEM: Effect of surface treatment of ceramic under loading does not appear to have been investigated. PURPOSE: The aim of this study was to investigate the effect of surface treatment of esthetic ceramic, which is performed to increase the bonding strength, on the fracture stress under controlled cyclic loading condition. MATERIAL AND METHODS: Sixty 1.0 mm-thick specimens were made from Mark II Vitablocs (Vita Zahnfabrik, Germany) and divided into 3 groups: polished (control), sandblasted, and etched. Specimens of each group were bonded to a dentin analog material base including micro-channels to facilitate the flow of water to the bonding interface. Bonded ceramics were cyclically loaded with a flat-end piston in the water (500,000 cycles, 15Hz). Following completion of cyclic loading, specimens were examined for subsurface crack formation and subsequent stress was determined and loaded to next specimen by the staircase method according to the crack existence. RESULTS: There were significant differences of mean fatigue limit in the sandblasted (222.86 ${\pm}$ 23.42 N) and etched group (222.86 ${\pm}$ 14.16 N) when compared to polished group (251.43 ${\pm}$ 10.6 N) (P<.05; Wald-type pair-wise comparison and post hoc Bonferroni test). Of cracked specimens, surface treated group showed longer crack propagation after 24 hours. All failures originated from the radial cracking without cone crack. Fracture resistance of this study was very low and comparable to failure load in the oral cavity. CONCLUSION: Well controlled cyclic loading could induce clinically relevant cracks and fracture resistance of Mark II ceramic was relatively low applicable only to anterior restorations. Surface treatment of inner surface of feldspathic porcelain in the matsicatory area could influence lifetime of restorations.

• 한국전자통신학회논문지
• /
• 제14권5호
• /
• pp.871-876
• /
• 2019

본 논문에서는 플루오린화 수소산(Hydrofluoric acid: HF) 수용액과 광섬유에 인가된 $1.55{\mu}m$ 파장의 레이저를 통해 유도된 광열 효과를 이용하여 오목한 광섬유 팁을 제작하였다. 제작 과정에서 인가한 레이저의 세기, 식각 시간, HF 수용액의 농도에 따른 광섬유 팁 오목 면의 곡률 반경을 광학 현미경을 이용하여 측정하였으며 곡률 반경이 세 변인에 대하여 어떻게 변화하는지 분석하였다. 또한, Free Spectral Range(FSR)와 Scanning electron microscope(SEM) 촬영을 통해 현미경을 이용한 측정 방법의 신뢰성을 검증하였다. 본 논문을 통해 광섬유 팁의 오목 면 제작 과정에서 변인에 따라 곡률 반경을 조절할 수 있게 됨으로써 기존의 HF 수용액을 이용한 광섬유 식각 방법의 한계점을 극복할 수 있었다.

• Journal of Periodontal and Implant Science
• /
• 제52권4호
• /
• pp.325-337
• /
• 2022

Purpose: The aim of this study was to investigate the effect of (1) the size of the bony access window and (2) collagen membrane coverage over the window in sinus floor elevation in a rabbit sinus model. Methods: Small bony access windows (SW; ø 2.8 mm) were made in 6 rabbits and large windows (LW; ø 6 mm) in 6 other rabbits. Both sinuses in each rabbit were allocated to groups with or without coverage of a collagen membrane (CM) on the window, resulting in 4 groups: SW, LW, SW+CM, and LW+CM. After 4 weeks of healing, micro-computed tomographic, histologic, and histomorphometric analyses were performed. Results: Bony healing in the window area was incomplete in all groups, but most bone graft particles were well confined in the augmented cavity. Histologically, the pattern of new bone formation was similar in all groups. Histomorphometrically, the percentage of newly formed bone was greater in the groups with CM than in the groups without CM, and in the groups with SW than in the groups with LW (12.92%±6.40% in the SW+CM group, 4.21%±7.73% in the SW group, 10.45%±4.81% in the LW+CM group, 11.77%±3.83% in the LW group). The above differences were not statistically significant (P>0.05). Conclusions: The combination of a small bony access window and the use of a collagen membrane over the window favored new bone formation compared to other groups, but this result should be further investigated due to the limitations of the present animal model.