• Atmosphere
• /
• v.24 no.3
• /
• pp.365-378
• /
• 2014

The limits of S-band dual-polarization radars in Korea are not reflected on the recent weather forecasts of Korea Meteorological Administration and furthermore, they are only utilized for rainfall estimations and hydrometeor classification researches. Therefore, this study applied four merging methods [SA (Simple Average), WA (Weighted Average), SSE (Sum of Squared Error), TV (Time-varying mergence)] to the QPE (Quantitative Precipitation Estimation) model [called RAR (Radar-AWS Rainfall) calculation system] using single-polarization radars and S-band dual-polarization radar in order to improve the accuracy of the rainfall estimation of the RAR calculation system. As a result, the merging results of the WA and SSE methods, which are assigned different weights due to the accuracy of the individual model, performed better than the popular merging method, the SA (Simple Average) method. In particular, the results of TVWA (Time-Varying WA) and TVSSE (Time-Varying SSE), which were weighted differently due to the time-varying model error and standard deviation, were superior to the WA and SSE. Among of all the merging methods, the accuracy of the TVWA merging results showed the best performance. Therefore, merging the rainfalls from the RAR calculation system and S-band dual-polarization radar using the merging method proposed by this study enables to improve the accuracy of the quantitative rainfall estimation of the RAR calculation system. Moreover, this study is worthy of the fundamental research on the active utilization of dual-polarization radar for weather forecasts.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.3
• /
• pp.264-272
• /
• 2009

In this paper, a Ka-band 10 W power amplifier module is designed and fabricated using MIC(Microwave Integrated Circuit) module technology which combines multiple power MMIC(Monolithic Microwave Integrated Circuit) chips on a thin film substrate. Modified Wilkinson power dividers/combiners are used for millimeter wave modules and CBFGC-PW-Microstrip transitions are utilized for reducing connection loss and suppressing resonance in the high-gain and high-power modules. The power amplifier module consists of seven MMIC chips and operates in a pulsed mode. for the pulsed mode operation, a gate pulse control circuit supplying the control voltage pulses to MMIC chips is designed and applied. The fabricated power amplifier module shows a power gain of about 58 dB and a saturated output power of 39.6 dBm at a center frequency of the interested frequency band.

• Journal of muscle and joint health
• /
• v.14 no.2
• /
• pp.158-168
• /
• 2007

Purpose: The purpose of this study was to determine the effects of exercise using Thera Band on body compositions, blood pressure and physical fitness in the elderly women. Method: The study was designed as a nonequivalent control group pretest-posttest quasi-experimental study. Twenty four subjects were assigned for experimental group and twenty one subjects were assigned for control group. The experimental group participated in Thera Band exercise program consisting of 60 minutes per session, 3 times a week during the period of 12 weeks. The effects of the program were assessed using the instruments measuring the body compositions, blood pressure and physical fitness before and after applying the program. Data were collected between April and June in 2006, and analyzed by $x^2$-test, t-test, ANCOVA using a SPSS 11.5 program. Results: There were statistically significant in percent of body fat, muscle strength, muscle endurance, flexibility, and balance ability, but no significant differences were found in body weight, systolic pressure and diastolic pressure. Conclusion: Exercise using Thera Band can be an effective nursing intervention to improve percent of body fat, muscle strength, muscle endurance, flexibility and balance ability in the elderly women.

• Journal of Korean Clinical Nursing Research
• /
• v.21 no.2
• /
• pp.266-275
• /
• 2015

Purpose: The objective of this study was to verify the effects of elastic-band exercise on pain, range of motion, and fear of falling in patients with total knee replacement. Methods: The study design was a nonequivalent control group non-synchronized quasi-experimental design. Data were collected from December 10, 2014 to January 10, 2015 in an orthopedic specialty hospital located in the C city. Forty-eight patients participated in the study, and each twenty-four were assigned to the experimental group and the control group. The elastic-band exercise was used with the experimental group for 10 days. The numeric rating scale was used to measure pain, goniometer to measure range of motion, and a questionnaire to measure fear of falling. The data were analyzed using $x^2-test$, Fisher's exact, t-test and paired t-test. Results: Compared to the control group, pain in the experimental group decreased (t=-2.89, p=.006), range of motion increased (t=2.98, p=.005), and fear of falling decreased (t=-4.63 p<.001). Conclusion: The elastic-band exercise for total knee replacement patients is considered to be an effective nursing intervention to decrease pain and fear of falling, and to increase range of motion.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.5
• /
• pp.335-342
• /
• 2015

Phononic crystals are composite materials consisting of a periodic arrangement of scattering inclusions in a host material. One of the most important properties of phononic crystals is the existence of band gaps, i.e., ranges of frequencies at which acoustic waves cannot propagate through the structure. The present study aims to investigate theoretically and experimentally the acoustic band structures in two-dimensional (2D) phononic crystals consisting of periodic square arrays of stainless steel solid cylinders with a diameter of 1 mm and a lattice constant of 1.5 mm in water. The theoretical dispersion relation that depicts the relationship between the frequency and the wave vector was calculated along the ${\Gamma}X$ direction of the first Brillouin zone using the finite element method to predict the band structures in the 2D phononic crystals. The transmission and the reflection coefficients were measured in the 2D phononic crystals with 1, 3, 5, 7, and 9 layers of stainless steel cylinders stacked in the perpendicular direction to propagation at normal incidence. The theoretical dispersion relation exhibited five band gaps at frequencies below 2 MHz, the first gap appearing around a frequency of 0.5 MHz. The location and the width of the band gaps experimentally observed in the transmission and the reflection coefficients appeared to coincide well with those determined from the theoretical dispersion relation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.8
• /
• pp.819-826
• /
• 2002

In this paper, the performance of Au / $Ba_{0.5}Sr_{0.5}TiO_3$ (BST) / Magnesium oxide (MgO) two-layered electrically tunable band-pass Filters (BPFs) is demonstrated. The devices consist of microstrip, coplanar waveguide (CPW), and conductor-backed coplanar waveguide (CBCPW) structures. These BST thin film band-pass filters have been designed by the 2.5 D field simulator, IE3D, Zeland Inc., and fabricated by thin film process. The simulation results, using the 2-pole microstrip, CPW, and CBCPW band-pass filters, show the center frequencies of 5.89 GHz, 5.88 GHz, and 5.69 GHz, and the corresponding insertion losses are 2.67 dB, 1.14 dB, and 1.60 dB, with 3 %, 9 %, and 7 % bandwidth, respectively. The measurement results show the center frequencies of 6.4 GHz, 6.14 GHz, and 6.04 GHz, and their corresponding insertion losses are 6 dB, 4.41 dB, and 5.41 dB, respectively, without any bias voltage. With the bias voltage of 40 V, the center frequencies for the band-pass filters are measured to be 6.61 GHz, 6.31 GHz, and 6.21 GHz, and their insertion losses are observed to be 7.33 dB, 5.83 dB, and 6.83 dB, respectively. From the experiment, the tuning range for the band-pass filters are determined as about 3 % ~ 8 %.

• Bulletin of the Korean Chemical Society
• /
• v.12 no.4
• /
• pp.445-449
• /
• 1991

A series of trisilaalkanes has been prepared in high yields by the direct reaction of ${\alpha}$ -chloromethylsilanes with metallic silicon in the presence of copper catalyst using the stirred reactor equipped with a spiral band agitator at the carefully controlled temperature between $280^{\circ}C$ and $340^{\circ}C.$ Disilaalkane compounds were obtained as the minor products. Cadmium was found to be a good promotor for the reactions, while zinc was an inhibitor.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.100-103
• /
• 2008

COMS(Communication, Ocean and Meteorological Satellite) has multiple payloads; Meteorological Image(MI), Ocean Color Imager(GOCI) and Ka-band communication payloads. MI has 4 IR and 1 visible channel. In order to improve the quality of IR image, two calibration sources are used; black body image and cold space look data. In case of COMS, the space look is performed at 10.4 degree away from the nadir in east/west direction. During space look, SUN or moon intrusions are strictly forbidden, because it would degrade the quality of collected IR channel calibration data. Therefore we shall pay attention to select space look side depending on SUN and moon location. This paper proposes and discusses a simple and complete space look side selection logic based on SUN and moon intrusion event file. Computer simulation has been performed to analyze the performance of the proposed algorithm in term of east/west angular distance between space look position and hazardous intrusion sources; SUN and moon.

• The Journal of Korean Physical Therapy
• /
• v.25 no.3
• /
• pp.143-148
• /
• 2013

Purpose: The purpose of this study was to investigate whether changes in electromyography (EMG) activations of spinal stability muscles with respiratory demand change were due to changes in respiratory demand or in postural demand. Methods: Forty healthy subjects (19male, 21female, $20.8{\pm}1.9$years old) performed quiet breathing and four different forced respiratory maneuvers (FRM) (Pulsed Lip Breathing, Diaphragmatic Breathing, Combination breathing, and respiratory muscle endurance training breathing) while in sitting and standing positions. EMG data for four muscles (TrA/IO, EO, RA, and ES) were collected and filtered using a band pass filter (20~200Hz) and a notch filter (60, 120, 180Hz). Results: There were no significant differences on percentage of change on %MVIC between QB and FRM (PLB, CB, DB, and RMET) between positions (all p>0.05).

• Journal of electromagnetic engineering and science
• /
• v.8 no.4
• /
• pp.153-157
• /
• 2008

Most of malfunctions in electronic equipment or systems controlled by processors is occurred by the differential- and common-mode noises, and the electrical fast transient (EFT). The International Electrotechnical Commission (IEC) has prepared the dummy signal to test the immunity level of the equipment. For the countermeasure against the differential- and common-mode noises, and the EFT, we designed, fabricated, and tested a new electromagnetic compatibility (EMC) filter, which is composed of feed-through capacitors and ferrite beads with high permeability. As a result, the filter showed excellent differential- and common-mode noises filtering, and immunity improving characteristics over the frequency band from 30 MHz to 1.5 GHz and 1.8 GHz, respectively.