• Journal of Life Science
• /
• v.27 no.6
• /
• pp.632-639
• /
• 2017

Mature haptoglobin (Hp) is a plasma glycoprotein and acts as an antioxidant by scavenging cell-free hemoglobin (Hb). Prohaptoglobin (proHp) is an unprocessed Hp precursor which is present a little in circulation. However, the biological function of proHp remains unknown. To investigate the structural and functional differences between proHp and Hp, we prepared recombinant proHp isoforms and compared their sialic acid content and Hb-binding capacity with those of mature isoforms. When proHp samples were analyzed by Western blot under non-reducing conditions, proHp1 was detected as one band of approximately 130 kDa and proHp2 as multiple bands >200 kDa, in the manner of mature Hp1-1 and Hp2-2, respectively. On the native polyacrylamide gel under non-reducing and non-denaturing conditions, both proHp isoforms migrated more slowly than their mature Hp counterparts. In addition, the lectin-based ELISA assay demonstrated that the content of sialic acid in proHp1 and proHp2 was much less than in Hp1-1 and Hp2-2. The Hb-binding capacity of proHp was also lower than those of mature Hp. These findings indicate that proHp and Hp are similar in the size and polymerization pattern, but different in sialic acid content and Hb-binding activity. It suggests precursor proHp may exert different functions in circulation than does mature Hp.

• Journal of Life Science
• /
• v.27 no.6
• /
• pp.617-622
• /
• 2017

In this study, we sought to develop an effective cloning system by which human cytochrome $b_5$ (cyt $b_5$) is introduced and expressed in zebrafish. First, the 414 bp human cyt $b_5$ gene was amplified from RNA extracts of HeLa cells using RT-PCR, and the amplicon was subsequently sequenced to confirm that it was intact. Next, cyt $b_5$ was cloned into the pEGFP-N3 vector, which also encodes a fluorescent gene. One-cell stage zebrafish embryos were microinjected with the recombinant vector containing the cyt $b_5$ gene. Fluorescence microscopy confirmed high expression of the fluorescent gene in the injected fry compared to the non-fluorescent control fry. Finally, we extracted RNA from the injected fry and performed RT-PCR to determine whether the human cyt $b_5$ gene is expressed in the transgenic zebrafish. Sequencing analysis further confirmed that the cloned human cyt $b_5$ gene was intact. The transgenic zebrafish model produced in this study will be a useful tool to study therapeutic approaches to cure various diseases related to the deficiency of functional human cyt $b_5$ as well as tools for cloning useful genes in fish.

• Korean Journal of Optics and Photonics
• /
• v.17 no.1
• /
• pp.81-88
• /
• 2006

Delayed luminescence from human hands after illumination by light at different wavelength bands was studied. A delayed luminescence measurement system equipped with photomultiplier tube (PMT), fiber optics and automatic mechanical shutter system was developed. Three spectrum band-pass filters, fer which transmissions are on 350${\~}$450 nm, 450${\~}$550 nm and 550${\~}$650 nm, were used to select irradiation wavelength, and 150W metal-halide lamp was used as an illumination source. Six volunteers put their palms (dorsa) onto the measurement system, and after light illumination, delayed luminescence were measured for 10 minutes. The results show that delayed luminescence after shorter wavelength illumination was higher than that a(ter longer wavelength one. These results indicate the existence of accepters in human skin which can be excited at short wavelengths. Furthermore, each subjects showed different delayed luminescence curve patterns. Reactive oxygen species (ROS) are known to have important roles on delayed luminescence, and this research suggests that ROS concentration can be measured noninvasively with optical methods.

• Horticultural Science & Technology
• /
• v.32 no.4
• /
• pp.493-498
• /
• 2014

The objective of this study was to make growth and yield models for common ice plant (Mesembryanthemum crystallinum L.) using expolinear functional equations in a closed-type plant production system. Three-band radiation type fluorescent lamps with a 12-hours photoperiod were used, and the light intensity was $200{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$. Nutrient film systems with three layers were used for plant growth. Environmental conditions, such as air temperature, relative humidity and $CO_2$ concentration were controlled by an ON/OFF operation. Leaf area, shoot fresh and dry weights, light use efficiency of common ice plant as function of days after transplanting, accumulative temperature and accumulative radiation were analyzed. Leaf area, shoot fresh and dry weights per area were described using an expolinear equation. A linear relationship between shoot dry and fresh weights was observed. Light use efficiency of common ice plant was $3.3g{\cdot}MJ^{-1}$ at 30 days after transplanting. It is concluded that the expolinear growth model can be a useful tool for quantifying the growth and yield of common ice plant in a closed plant production system.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.4 no.2
• /
• pp.208-223
• /
• 1994

The purpose of this study was to evaluate the efficiency of diffusive(or passive) sampler in measuring airbone organic solvents. Diffusive samplers are generally simple in construction and do not require power for operation. The efficiency of the diffusive samplers has not sufficiently been investigated in Korea. Three types of samplers were studied in this study. The sampling and analytical results by passive samplers were compared with results by charcoal tube method recommended by NIOSH(National Institute for Occupational Safty and Health). The following characteristics are identified and studied as critical to the performance passive monitors; recovery, reverse diffusion, storage stability, accuracy and precision, face velocity and humidity, n-Hexane, TCE(trichloroethylene) and toluene were used as test vapors. A dynamic vapor exposure system consisting of organic vapor generator and sampling chamber for evaluating diffusive samplers are made. The results of the study are summarized as follows. 1. NIOSH recommands that the overall accuracy of a sampling method in the range of 0.5 to 2.0 times the occupational health standard should be ${\pm}25$ percent for 95 percent confidence level. Among three types of diffusive samplers, sampler A has permeation membrane and samplers Band C have diffusive areas, samplers A and B met the criterion that overall accuracy for 95% confidence level of the samplers were within ${\pm}25$ percent of the reference value. Sampler C had overall accuracy ${\pm}9.6%$ and ${\pm}11.8%$ in hexane and TCE, respectively. The concentration of toluene was overestimated in sampler C with overall accuracy of ${\pm}43.9%$. 2. The desorption efficiencies of diffusive samplers were 96-107%. 3. There was no significant sampe loss during four weeks of storage both with and without refrigeration. 4. There was no significant reverse diffusion, when the samplers were exposure to clean air for 2 hours after sampling for 2 hours at the level of 2 TLY. 5. In case of 8 hours sampling, relative differences(RD) of concentrations between charcoal tube method and diffusive method were 15-39%, 13-46%, and 4-35% for sampler A, B and C, respectively. The performance was poor in 8 hours sampling for multiple substance monitors. 6. At high velocity(100 cm/sec), samplers B and C overestimated the concentrations of organic vapors, and sampler A with permeation membrance gave better results. 7. At 80% relative humidity, samplers showed no siginificant effect. Low humidity also did not affect the diffusive samplers.

• Korean Journal of Plant Tissue Culture
• /
• v.22 no.3
• /
• pp.121-126
• /
• 1995

Diploid plants were obtained by anther culture of tetraploid poplar(Populus alba L. X P.glandutosa Uyeki). The effect 2,4D on callus formation from anther culture was greater than any other auxins tested. The highest average number of multiple shoots per callus was obtained when zeatin was used at levels of 6-8 ${\mu}$M. Regenerated shoots were excised and transferred to MS basal medium. Rooted plantlets were subsequently transferred to pots containing artificial soil mix. Finally 100 plane were transplanted in nursery located in forest Genetics Research Institute. for the 300 anther clones growing in greenhouse for 6 months after transplanting, 33% were slow-growing, 47% were rapid-growing and 20% had huge leaf size with rapid-growing characteristics. Chromosome study showed a narrow range of variation from diploid to tetraploid. DNA polymorphism studies using various RAPD markers revealed some extend of differences among the anther-clones in their band pattern.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.1
• /
• pp.15-20
• /
• 2011

The pine wilt disease is one of the most serious forest diseases that kill the pine trees, and the study on the invasion and movement of the pine wood nematode within the tree is very important for understanding the inhabitation of pine wood nematode. In this relation, the microscopic observation was carried out to study the place of inhabitation and movement of pine wood nematode within the infested wood. In result, the rays were mainly infested by pine wood nematode and showed dark discoloration due to their necrosis in cross, radial and tangential surface. Also, the intensive damage was found in the resin canals. On the other hand, some traumatic resin canals in tangential band were identified in the sapwood near the cambium. In the ray, the pine wood nematode occurred more commonly in the ray parenchyma cell and fusiform ray with horizontal resin canal than in the ray tracheid and uniseriate ray without horizontal resin canal, respectively. The pine wood nematode was thought to move from ray to tracheid through the large natural opening, window-like pit, in the cross-field, neither through the small natural opening, bordered pit, in the tracheid nor through the tracheid wall by creating a bore hole.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.27 no.5
• /
• pp.446-456
• /
• 2005

Nerve growth factor(NGF) has a critical role in peripheral nerve regeneration. The aim of this study is to construct a well-functioning hNGF-$\beta$ recombinat adenovirus for the ultimate development of improved method to promote peripheral nerve regeneration with adenovirus mediated hNGF-$\beta$ gene transfection into Schwann cells. First PCR associated cloning of GFP-tagged hNGF-$\beta$ which was ligated into E1/E3 deleted adenoviral vector was performed and tranfected into E. coli to construct hNGF-$\beta$ recombinant adenovirus. After production of recombinat adenovirus in a large scale, its transfection efficiency, expression, and function were evaluated using cell lines or primarily cultured cells of HEK293 cells, Schwann cells, fibroblast(NIH3T3) and myocyte(CRH cells). GFP expression was observed in 90% of infected cells compared to uninfected cells. Total mRNA isolated from hNGF-$\beta$ recombinat adenoviru infected cells showed strong RT-PCR band, however, LacZ recombinant adenovirus infected or uninfected cells did not. NGF quantification by ELISA showed a maximal release of 18.865 +/- 0.31ng/mL at 4th day. PC-12 cells exposed to media with hNGF-$\beta$ recombinant adenovirus infected Schwann cell demonstrated higher levels of differentiation compared with controls. We generated hNGF-$\beta$ recombinant adenovirus and induced over expression of NGF successfully in nonneuronal and neuronal cells. Following these result, it is expected to develop an improved treatment strategy peripheral nerve regeneration using the hNGF-$\beta$ gene transfected cells.

• Journal of the Mineralogical Society of Korea
• /
• v.19 no.2 s.48
• /
• pp.81-88
• /
• 2006

The Yttria Partially Stabilized Zirconia powder was prepared by spontaneous precipitation method using $ZrOCl_2{\cdot}8H_O-YCl_33{\cdot}6H_2O$ solution as a starting materials. The optimal experimental conditions such as concentration and pH of starting solutions, the amounts of stabilizer $Y_2O_3$ used, and sintered temperature were carefully studied. The best condition for synthesizing $ZrO_2$ was experimentally selected and applied throughout this study for the preparation of the 3 mole% $Y_2O_3$ partially stabilized zirconia, 3YSZ. The physical properties of 3YSZ was examined by XRD, Raman, DT A, and SEM. The structural transition from pure monoclinic high temperature $ZrO_2$ to tetragonal room temperature 3YSZ was made possible by the added amount of $Y_2O_3$ in the $ZrO_2+Y_2O_3$ system. All Raman Spectrum band appeared in the lower wave numbers rather than in higher wave numbers as structure changes from monoclinic to tetragonal.

• Journal of Life Science
• /
• v.14 no.1
• /
• pp.21-25
• /
• 2004

To identify genes involved in the decolorization of both crystal violet and malachite green, we isolated random mutants generated by transposon insertion in triphenylmethane-decolorizing bacterium, Citrobacter sp. The resulting mutant bank yielded 14 mutants with complete defect in color removal capability of both crystal violet and malachite green. Southern hybridization with a Tn5 fragment as a probe showed a single hybridized band in 5 mutants and these mutants appeared to have insertions at different sites of the chromosome. Tn5-inserted genes were isolated and the DNA sequence flanking Tn5 was determined. From comparison with a sequence database, putative protein products encoded by cmg genes were identified as follows. cmg 2 is MaIC protein in maltose transport system; cmg 6 is transcriptional regulator (LysR-type): cmg 12 is a putative oxidoreductase. The sequences deduced from two cmg genes, cmg 8 and cmg 11, showed no significant similarity to any protein with a known function. Therefore, these results indicate that these two cmg genes encode unidentified proteins responsible for decolorization of both crystal violet and malachite green.