• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2018년도 춘계학술대회 논문집
• /
• pp.75-75
• /
• 2018

Commercially pure titanium (CP-Ti) and Ti-6Al-4V alloys have been widely used in implant materials such as dental and orthopedic implants due to their corrosion resistance, biocompatibility, and good mechanical properties. However, surface modification of titanium and titanium alloys is necessary to improve osseointegration between implant surface and bone. Especially, when titanium oxide nanotubes are formed on the surface of titanium alloy, cell adhesion is greatly improved. In addition, plasma electrolytic oxide (PEO) coatings have a good safety for osseointegration and can easily and quickly form coatings of uniform thickness with various pore sizes. Recently, the effects of bone element such as magnesium, zinc, strontium, silicon, and manganese for bone regeneration are researching in dental implant field. The purpose of this study was researched on the surface morphology of PEO-treated Ti-6Al-4V alloy after anodic titanium oxide treatmentusing various instruments. Ti-6Al-4V ELI disks were used as specimens for nanotube formation and PEO-treatment. The solution for the nanotube formation experiment was 1 M $H_3PO_4$ + 0.8 wt. % NaF electrolyte was used. The applied potential was 30V for 1 hours. The PEO treatment was performed after removing the nanotubes by ultrasonics for 10 minutes. The PEO treatment after removal of the nanotubes was carried out in the $Ca(CH_3)_2{\cdot}H_2O+(CH_3COO)_2Mg{\cdot}4H_2O+Mn(CH_3COO)_2{\cdot}4H_2O+Zn(CH_3CO_2)_2Zn{\cdot}2H_2O+Sr(CH_2COO)_2{\cdot}0.5H_2O+C_3H_7CaO_6P$ and $Na_2SiO_3{\cdot}9H_2O$ electrolytes. And the PEO-treatment time and potential were 3 minutes at 280V. The morphology changes of the coatings on Ti-6Al-4V alloy surface were observed using FE-SEM, EDS, XRD, AFM, and scratch tester. The morphology of PEO-treated surface in 5 ion coating solution after nanotube removal showed formation or nano-sized mesh and micro-sized pores.

• Membrane and Water Treatment
• /
• 제3권3호
• /
• pp.169-179
• /
• 2012

One of the major limitations in the use of commercial aromatic polyamide thin film composite (TFC) reverse osmosis (RO) membranes is to maintain high performance over a long period of operation, due to the sensitivity of polyamide (PA) skin layer to oxidizing agents, such as chlorine, even at very low concentrations in feed water. This article reports surface modification of a commercial TFC RO membrane (BW30-Dow Filmtec) by covering it with a thin film of poly(vinyl alcohol) (PVA) crosslinked with glutaraldehyde (GA) to improve its resistance to chlorine. Crosslinking reaction was carried out at 25 and $40^{\circ}C$ by using PVA 1.0 wt.% solutions at different GA/PVA mass ratio, namely 0.0022, 0.0043 and 0.013. Water swelling measurements indicated a maximum crosslinking density for PVA films prepared at $40^{\circ}C$ and GA/PVA 0.0043. ATR-FTIR and TGA analysis confirmed the reaction between GA and PVA. SEM images of the original and modified membranes were used to evaluate the surface coating. Chlorine resistance of original and modified membranes was evaluated by exposing it to an oxidant solution (NaClO 300 mg/L, NaCl 2,000 mg/L, pH 9.5) and measuring water permeability and salt rejection during more than 100 h period. The surface modification effectively was demonstrated by increasing the chlorine resistance of PA commercial membrane from 1,000 ppm.h to more than 15.000 ppm.h.

• 한국기계가공학회지
• /
• 제20권2호
• /
• pp.51-57
• /
• 2021

The quality of the ceramic sintered coating on a metal surface through laser surface treatment is affected by the laser irradiation pattern. Depending on the laser irradiation pattern, the amount of residual stress and heat applied or accumulated on the surface increases or decreases, affecting the thickness attained in the ceramic sintering area. When the heat energy accumulated in the sintering area is high, the ceramic and the metal alloy melt and sufficiently mix to form a homogeneous and thick bonding interface. In this study, the thermal energy accumulation in the region sintered with zirconia was controlled using four types of laser processing patterns. The thickness of the diffusion region is analyzed by laser-induced breakdown spectroscopy of Mg-ZrO2 generated by laser sintering zirconia powder on the magnesium alloy surface. On the basis of the analysis of the Mg and Zr present in the sintered region through LIBS, the effect of the irradiation pattern on the sintering quality is confirmed by comparing and analyzing the heat and mass transfer tendency of the diffusion layer and the degree of diffusion according to the irradiation pattern. The derived diffusion coefficients differed by up to 9.8 times for each laser scanning pattern.

• 한국식품과학회지
• /
• 제45권5호
• /
• pp.545-549
• /
• 2013

본 연구에서는 GC-FID를 이용하여 식품첨가물공전에 사용량이 정해져 있는 빵류, 캡슐류, 건조과실류 채소류 및 과실류 채소류 중 유동파라핀의 함량을 측정하였다. 시료에서 n-hexane으로 유동파라핀을 추출하고 $KMnO_4$ 산화반응을 통해 추출물 중 불포화탄화수소의 극성을 증대시킨 다음 aluminium oxide를 충진한 SPE 카트리지로 정제하여 GC-FID로 측정하였다. 검출한계와 정량한계는 각각 10 mg/kg과 20 mg/kg으로 개별 n-alkane으로 정량하는 방법이 아닌 넓은 봉우리로 나타나는 유동파라핀의 면적의 합으로 정량하는 문헌들(15,17)의 값과 유사하게 나타났다. 유동파라핀은 빵류, 건조과실류 채소류 및 캡슐류에서 이형제 등으로 사용되고 있으나 최종 완제품에서 사용기준 이하로 검출되었고, 과실류 채소류에서 모두 불검출로 나타남에 따라 안전한 수준으로 관리되고 있음을 알 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1998년도 제14회 학술발표회 논문개요집
• /
• pp.24-24
• /
• 1998

반도체장비를 포함하는 초고진공장비의 園훌化가 급속히 그리고 절실히 요구되고 있는 것이 현실정이다. 當面해서 실현할 국산진공장비의 대상은 廣範圍하다. 즉, 각종 진공 pump ( (rotary, dry, diffusion, cryo, ion, turbo melecular pump), 진공 chamber, 진공 line, gate valve 를 위 시 한 진공 V머ve, flange, gasket, fl않d야lU, mainpulater 퉁 진공 部品이 다. 진공계 의 핵심 은 適切하고 優良한 진공재료의 선태파 사용이다. 진공장비는 사용자가 원하는 진공도를 원하 는 시간 동안 륨空度를 유지해 주어야 한다. 진공재료 선태의 기준사항은:(1) 기체의 透過성 (2) 薰했훌 (3) 혔體放出특성 - -outgassing과 degassing- (4) 機械的 량훌度 (5) 온도 의존성 (6) 化學톡성 (7) 加I성 및 鎔接 성 (8) 課電특성 (9) 磁氣특성 (10) 高速함子 및 放射線 특성 (11) 經濟성 및 調達생 둥이 다. 우량한 초고진공계재료는 풍부하게 개발되어 왔고, 또 新材料들이 개발되고 있다. 여기에서는 주로 초고진공 내지는 극고진공계의 構造材料, 機能材料, 部品材料 일반파 몇가지 신재료의 특 성에 관해서 記述한다. M Mild SteeHSAE, 1112, 1010, 1020, 1022, etc)., S Stainless SteeHAlSI, 304, 304L, 310, 316, 321, 347): 구조재료, chamber, fl하1ges A Aluminum과 Alloys (1060, 1100, 2014, 4032, 6(뻐1): 구조재료, chamber, flanges, gaskets A AI, Al 떠loy는 SS에 代替하는 역 할올 시 작하고 있다. C Copper, Copper Alloys(C11$\alpha$)0, C26800, C61400, Cl7200): 내장인자, gasket, cryopanel, tubing T Titanium, Ziriconium, Haf띠um 및 Alloys: 특히 Ti은 10n pump 용 getter material 이 외 에 U UHV,XHV용 chamber계로서 관심올 끌고 있다. N Nickel, Nickel Alloys (200, 204, 211, monel, nichrome): 부식 방지 , 전자장치 , 자기 장치 귀 금속(Ag, Au, Pt, Pd, Rh, Ir, Os, Ru): 보조부품, gasket, filament, coating, thermocouple, 접 합부위 T TiC, SiC, zrC, HfC, TaC 둥의 탄화물과, BN, TiN, AlN 동의 질화물, 붕화물이 둥장하고 었 다. 유리: Soda Lime, Borosilicate, Potash Soda Lead: View Port, Chamber envelope C Ceramics: AlZ03, BeO, MgO, zrOz, SiOz, MgOzSiOz, 3Alz032SiOz, Z$textsc{k}$hSiOz S상N4: e electrical, thermal insulators, crucibles, boats, single crystals, sepctr려 windows 저자는 최근 저자들이 발견한 Zr-Ti-Cu-Ni-Be amorphous alloys coated cham뾰r가 radiation p proof로 이용될 수 있는 사실을 점검하고 었다 .. Z.Y. Hua 들은 Cs3Sb를 새로운 photocathode 재료로 보고하고 있다.

• 한국환경보건학회지
• /
• 제42권1호
• /
• pp.27-33
• /
• 2016

Objectives: Alumina nanoparticles ($Al_2O_3$, Al-NPs) are used for various purposes, including as coating agents and paint additives. Their potential toxicity has raised concern for human health. This study focuses on exploring the toxic effects on the brain and kidneys caused by Al-NPs exposure in rats. Methods: The animals were orally administered Al-NPs at 10, 50 and 100 mg/kg body weight for 28 days following OECD TG 407. To determine the targeted toxicity of Al-NPs, histopathological examination and gene expression analysis were conducted on the rats. Results: The Al-NPs treatment induced kidney tubular dilatation. In the rat cerebrums, the expression levels of 126 genes experienced two-fold or greater increases in response to Al-NPs, including other genes encoding proteins involved in cell differentiation, transcription and signal transduction. In the rat kidneys, the expression levels of 152 genes also showed two-fold or greater increases in response to Al-NPs, including other genes encoding proteins involved in apoptosis, transcription and signal transduction. Conclusion: These results suggest that exposure to Al-NPs influences cellular signal pathways of kidney and cerebrum, and it can be a toxic indicators of nanometrials.

• 대한건축학회논문집:구조계
• /
• 제35권12호
• /
• pp.149-156
• /
• 2019

Recently, skyscraper building and apartment fires, which were rapidly spread out from a low floor to a rooftop, have become a frequent occurrence in mass media. This fire problems have a fatal disadvantage that the exterior wall finish of the building emits toxic gas in case of fire by using dry bit method or organic insulating material. Therefore, in order to remedy these problems, many exterior wall finishing construction methods have been proposed, but the current trend is to use existing construction methods due to problems such as economy, weight, and durability. On the other hand, in countries such as Germany and Japan, ceramic sidings are used as exterior finishing material for buildings, which is environmentally friendly, excellent natural beauty, long life, easy maintenance and high-quality exterior materials. However, those ceramic sidings have still the problems such as manufacturing cost and weight problem because of boosting the sintering temperature up to 1,350℃ or more. Also, conventional CRC, MgO, FRP sidings which are composed of pulp, glass fiber and organic materials, have been reports of deformation due to ultraviolet rays, discoloration, corrosion and scattering, surface rupture, lifting and peeling. Therefore, in this study as an alternative to solve this problem, halosite nano kaolin produced in Sancheong in Korea and frit flux were used to satisfy the required properties as ceramic siding using low temperature sintering (below 1,000℃) and lightweight materials such as pearlite. This study aims to design the optimal formulation and process of materials and to study the characteristics of nano-coated ceramic siding material development and to present relevant basic data. The findings show that ceramic siding for nanocoated building materials is excellent as a natural ceramic siding building material. The fire resistance of natural minerals and nano particle refining technology satisfy the bending strength of 80kgf / cm2, the volume ratio of 2.0 and the absorption rate of less than 10.0%.

• 한국식품위생안전성학회지
• /
• 제32권4호
• /
• pp.284-289
• /
• 2017

본 연구는 국내 미지정 피막제인 산화형 폴리에틸렌 왁스를 분석하기 위해 다양한 분석방법을 비교, 검토하였으며, 확립된 최적 분석법을 이용하여 시중 유통되는 과일 및 견과류에서 산화형 폴리에틸렌 왁스의 사용여부를 모니터링 하였다. 최적 분석법을 확립하기 위하여 산가, HT-GPC, MALDI-TOF/MS, GC-FID, FT-IR 등을 비교하였다. 산가측정 결과 산화형 폴리에틸렌 왁스를 첨가한 시료와 첨가하지 않은 시료 모두 산가가 1.12 mg KOH/g로 산가의 변화가 나타나지 않아 산가를 이용한 식품 중 산화형 폴리에틸렌 왁스의 분석은 어려울 것으로 판단되었으며, HT-GPC분석은 표준물질의 분산도 값이 약 3.4로 확인되었으며, GPC를 이용한 분석은 실험실간 낮은 재현성과 컬럼 등 분석조건에 따른 결과 값이 달라질 수 있기 때문에 분자량의 분산도만으로 식품 중 산화형 폴리에틸렌 왁스의 분석은 어려울 것으로 판단되었다. MALDI-TOF/MS 분석은 700~2,000 m/z에 peak가 관찰되었지만, 산화형 폴리에틸렌 왁스 성적서에 적혀있는 분자량 범위인 2,700~2,800 m/z와 큰 차이를 보여, MALDI-TOF/MS를 이용한 분석 역시 어려울 것으로 판단되었다. GC-FID를 이용한 지방산 분석결과 산화형 폴리에틸렌 왁스 표준물질에서 과일 및 견과류에서 흔히 볼 수 없는 지방산인 C11:0, C15:1 지방산이 검출되었지만, 제외국 허용기준으로 첨가하여 분석하였을 때 관찰되지 않고, 고농도를 첨가할 경우에만 피크가 관찰되어 GC-FID를 이용한 분석은 어려울 것으로 판단되었다. FT-IR 분석결과 코팅된 견과류 시료와 코팅되지 않은 견과류 시료를 비교하였을 때 코팅된 시료에서 산화형 폴리에틸렌 왁스 표준물질의 spectrum과 일치하는 spectrum을 나타내어, 식품 중 산화형 폴리에틸렌 왁스의 분석은 FT-IR로 분석이 가능함을 확인하였다. 확립된 FT-IR 분석법을 이용하여 국내외 대형마트에서 구입한 111건의 과일 및 견과류를 분석한 결과 산화형 폴리에틸렌 왁스를 사용한 시료가 없음을 확인하였다.

• Journal of Periodontal and Implant Science
• /
• 제33권1호
• /
• pp.1-11
• /
• 2003

Hydroxyapatite(HA) has been extensively used as bone graft materials and tooth implant surface coating materials because of its biocompatibility and osteoconductive properties. However, as HA is intrinsically poor in mechanical properties, zirconia($ZrO_2$) was incorporated with HA as reinforcing phases for improvement of mechanical properties. The purpose of this study was to investigate the biological activities of HA-coated zirconia through the cell proliferation test, measurements of alkaline phosphatase activity, and histologic examination. Four kinds of tested blocks were prepared according to the pore size (300-500${\mu}m$/500-700${\mu}m$) and the porosity (70%/90%). Cell proliferation and alkaline phosphatase activity was measured at 1, 7, 14 days. The number of cells proliferate after 7, 14 days were significantly increased in all groups when compared with that of the first day, but there was no significant difference between the 4 groups at each time period. At the 7 day, alkaline phosphatase activities of cells cultured in 4 groups were higher than that of the first day, but there was no significant difference between the 4 groups at each time period. The human gingival fibroblast and MG 63 cell was used to evaluate the cell cytotoxicity using MTT test. The materials tested in the current study turned out to be non-cytotoxic. In histologic examination(SEM), at 1 day there were many cells attached on the surfaces of all kinds of tested blocks. The number of cells were increased over time. At the 14 day, there were more cells proliferated than 1 day and some of the pores of blocks were partially filled with the proliferated cells. The in vitro response of osteoblast-like cells to the HA-coated zirconia showed comparable effect on transformation comparable to hydroxyapatite.

• 원예과학기술지
• /
• 제34권4호
• /
• pp.528-536
• /
• 2016

본 연구는 칼슘제, 피막제, $GA_{4+7}+BA$의 수체살포 및 봉지씌우기 처리가 감홍 품종의 동녹 방지와 과실품질에 미치는 영향을 검토하기 위하여 실시하였다. 4년간(2012-2015)의 '감홍' 사과의 동녹 발생은 연도에 따라 차이가 있었으며 칼슘제, 피막제 및 $GA_{4+7}+BA$ 처리에 의한 동녹 발생 정도는 다른 처리에 비하여 만개 후 20일에 $GA_{4+7}+BA$ 1,000배액 처리구에서 현저하게 낮았고, 수확 시 과실 품질에는 큰 차이는 없었으나 과중은 증가하였다. 1중 봉지색 종류에 의한 동녹 발생정도는 무처리에 비하여 낮았고, 황색봉지 및 변색봉지 처리에서 우수하였다. 봉지씌우기 시기에 의한 동녹 발생정도는 만개 후 20일 처리가 만개 후 30, 40일 처리에 비하여 현저하게 낮았으며, 과실 품질에는 차이는 없었다. 그리고 $GA_{4+7}+BA$를 만개 후 20일과 30일에 2회 처리와 $GA_{4+7}+BA$을 만개 후 20일에 처리한 후 만개 30일에 칼슘함유봉지를 처리한 과실에 동녹발생이 각각 1.8과 1.3으로 무처리구(5.5)에 비하여 현저히 낮았다. $GA_{4+7}+BA$ 처리에 의한 과실부위별 동녹 발생 정도는 과실 과병부와 과정부에 비하여 과실의 중앙부에서 더 낮은 결과를 보였다. 따라서 '감홍' 사과의 동녹발생 경감을 위해서는 만개 후 20일에 $GA_{4+7}+BA$ 1,000배액 1회 및 2회 처리가 가장 우수한 효과를 나타내었다.