• 한국재료학회지
• /
• 제14권1호
• /
• pp.46-51
• /
• 2004

The annealing of a Cu(4.5at.% Mg)/$SiO_2$/Si structure in ambient $O_2$, at 10 mTorr, and $300-500^{\circ}C$, allows for the outdiffusion of the Mg to the Cu surface, forming a thin MgO (15 nm) layer on the surface. The surface MgO layer was patterned, and successfully served as a hard mask, for the subsequent dry etching of the underlying Mg-depleted Cu films using an $O_2$ plasma and hexafluoroacetylacetone [H(hfac)] chemistry. The resultant MgO/Cu structure, with a taper slope of about $30^{\circ}C$ shows the feasibility of the dry etching of Cu(Mg) alloy films using a surface MgO mask scheme. A dry-etched Cu(4.5at.% Mg) gate a-Si:H TFT has a field effect mobility of 0.86 $\textrm{cm}^2$/Vs, a subthreshold swing of 1.08 V/dec, and a threshold voltage of 5.7 V. A novel process for the dry etching of Cu(Mg) alloy films, which eliminates the use of a hard mask, such as Ti, and results in a reduction in the process steps is reported for the first time in this work.

• 한국전기전자재료학회논문지
• /
• 제27권7호
• /
• pp.472-476
• /
• 2014

We report the characteristics of thin-film transistor (TFT) to make the bi-channel structure with stacked $Mg_{0.1}Zn_{0.9}O$ (Mg= 10 at.%) and ZnO. The ZnO and $Mg_{0.1}ZnO_{0.9}O$ thin films were deposited by radio frequency (RF) co-sputter system onto the thermally oxidized silicon substrate. A total thickness of active layer was 50 nm. Firstly, the ZnO thin films were deposited to control the thickness from 5 nm to 30 nm. Sequentially, the $Mg_{0.1}ZnO_{0.9}O$ thin films were deposited to change from 45 nm to 20 nm. The bi-layer TFT shows more improved properties than the single layer TFT. The field effect mobility and subthreshold slope for $Mg_{0.1}ZnO_{0.9}O$/ZnO-TFT are $7.40cm^2V^{-1}s^{-1}$ and 0.24 V/decade at the ZnO thickness of 10 nm, respectively.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2013년도 춘계학술대회 논문집
• /
• pp.112-113
• /
• 2013

Thin CrAlMgSiN films, whose composition were 30.6Cr-11.1Al-7.3Mg-1.2Si-49.8N (at.%), were deposited on steel substrates in a cathodic arc plasma deposition system. They consisted of alternating crystalline Cr-N and AlMgSiN nanolayers. After oxidation at $800^{\circ}C$ for 200 h in air, a thin oxide layer formed by outward diffusion of Cr, Mg, Al, Fe, and N, and inward diffusion of O ions. Silicon ions were relatively immobile at $800^{\circ}C$. After oxidation at $900^{\circ}C$ for 10 h in air, a thin $Cr_2O_3$ layer containing dissolved ions of Al, Mg, Si, and Fe formed. Silicon ions became mobile at $900^{\circ}C$. After oxidation at $900^{\circ}C$ for 50 h in air, a thin $SiO_2-rich$ layer formed underneath the thin $Cr_2O_3$ layer. The film displayed good oxidation resistance. The main factor that decreased the oxidation resistance of the film was the outward diffusion and subsequent oxidation of Fe at the sample surface, particularly along the coated sample edge.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1997년도 제13회 학술발표회 논문개요집
• /
• pp.169-172
• /
• 1997

MgO dielectric pprotection layer is ppreppared by R.F. reactive magnetron spputtering with Mg target under various conditions of spputtering ppressure, time and substrate tempperature. Discharge characteristics of ppDpp is also studied as a pparameter of MgO pprepparation conditions. As the working ppressure and substrate tempperature was increase, the discharge voltage was decreased. Two kinds of MgO ppreppared both spputtering and E-beam methods were stable after annealing at 35$0^{\circ}C$ for 120min. discharge voltage under 3 mixed gas(He+Xe0.2%+Ne30%) was V=130V, V=102V and ${\gamma}$ coefficient was twiced as much as that of dielectric layer.

• 한국전기전자재료학회논문지
• /
• 제15권5호
• /
• pp.441-448
• /
• 2002

The electrical properties of the GaN-based green light emitting diodes(LEDs) with the Mg-doped p-GaN layer activated in $N_2$ or $O_2$ ambient have been compared. For the $N_2$ -ambient activation the current-voltage behavior of LEDs has been found to be improved when the Mg dopants activation was performed in the higher temperature. However, for the $O_2$-ambient activation the current-voltage characteristic has been observed to be enhanced when the Mg dopants activation was carried out in the lower temperature. The minimum forward voltage at 20mA was obtained to be 4.8 V for LEDs with the p-GaN layer activated at $900^{\circ}C$ in the $N_2$ ambient and 4.5V for LEDs with the p-GaN layer treated at $700^{\circ}C$ in the $O_2$ambient, repectively. The forward voltage reduction of the LEDs treated in the $O_2$-ambient may be related to the oxygen co-doping of the p-GaN layer during the activation process. The $O_2$ -ambient activation process is useful for the enhancement of the LED performance as well as the fabrication process since this process can activate the Mg dopants in the low temperature.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2004년도 동계학술연구발표회 논문개요집
• /
• pp.200-201
• /
• 2004

The $H_{EB}$ was investigated for exchange coupling $20\;{\AA}\;Fe/x\;{\AA}\;NiO\;(type-I samples)$, $20\;{\AA}\;Fe/x\;{\AA}$ nonmagnetic layer $(MgO, Ag, Cu)/(500-x{\AA})$ NiO (type-II smaples). In type-I samples, the $H_{EB}$ is long-range coupling when looking from the point of view of the AFM. The $H_{EB}$ consistent with a generalized Meiklejohn-Bean approach. The critical thickness, which $H_{EB}$ is observed, is $130\;{\AA}$. In type-II samples, MgO layer more decouples the thin interfacial NiO from bottom NiO than other nonmagnetic layer. Nd the decoupling of Ag smallest. This means that the Ag layer has strong coupling the thin interfacial NiO with bottom NiO.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.173-176
• /
• 2009

We suggest a new protective layer for PDP consists of SrO and MgO double layer. This double layer structure protects SrO layer from the contamination by $H_2O$ or $CO_2$ in the air and enable SrO to play as the main cathode material. It was confirmed that the high secondary electron emission characteristics of SrO by Xe ion can bring considerable driving voltage reduction and improvement of luminance and luminous efficacy in PDP.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.481-482
• /
• 2006

플라즈마 화상표시기 (PDP)의 보호막 물질로 사용 중인 다결정 MgO의 특성을 개선하기 위하여 본 연구에서는 MgO에 희토류계 원소를 치환하여 제조하였으며, 치환량에 따른 MgO 보호막의 광학적 특성과 전기적 특성을 고찰하였다. MgO + 100 ppm $Gd_2O_3$조성으로 제작한 MgO 박막의 이차전자 방출계수 값이 순수 MgO 보다 35% 높게 나타났다. $Gd_2O_3$ dopant가 100 ppm 첨가시까지 밀도가 증가하였으나, 그 이상 첨가시 감소하는 경향을 나타냈다. 가속전압 200 V에서 이차전자 방출계수는 0.138 이었고 표면거칠기는 5.77 nm 이었으며 투과율은 550 nm 에서 95.76% 이었다.

• 한국전기전자재료학회논문지
• /
• 제13권7호
• /
• pp.612-616
• /
• 2000

This paper describes on the fabrication and characteristics of hot-film type micro-flowsensors integrated with Pt-RTD(resistance thermometer device) and micro-heater on the Si membrane in which MgO thin-film was used as medium layer in order to improve adhesion of Pt thin-film to SiO$_2$layer. The MgO layer improved adhesion of Pt thin-film to SiO$_2$layer without any chemical reactions to Pt thin-film under high annealing temperatures. Output voltages increased due to increase of heat-loss from sensor to external. The output voltage was 82 mV at $N_2$flow rate of 2000 sccm/min heating power of 1.2 W. The response time($\tau$:63%) was about 50 msec when input flow was stepinput

• 한국세라믹학회지
• /
• 제27권8호
• /
• pp.979-990
• /
• 1990

The possible use of bioglass as implant materials is due to its biocompatibility to human body. Even if many animal studies for the bioglasses have been performed, their structures and physical properties are not fully understood. In the present work, several investigations such as Raman spectroscopic analysis, density, thermal expansion coefficient, softening temperature, and refractive index measurement were carried out to find the structures and physical properties of bioglasses, where MgO is substituted for CaO in bioglass composition (46.1%SiO2, 24.4%Na2O, 26.9%CaO, 2.6%P2O5 ; mole%). Hydroxyapatite formation on the glass surface reacted in Tris-buffer solution was also examined. When CaO was replaced by MgO, nonbridging oxygen in glass structuer was diminished but the degree of disorder increased. Thermal expansion and softening properties showed the mixed oxide effect. Hydroxyapatite were formed on the surface of 0~11mole% of MgO containing bioglasses, and the thickness of SiO2-rich layer as well as hydroxyapatite layer were unchanged with MgO content. However, the hydroxyapatite was not formed on the surface of the bioglasses containing over 11 mole percent MgO, even if the glasses were reacted for long period.