• 대한환경공학회지
• /
• 제31권7호
• /
• pp.541-548
• /
• 2009

본 연구에서는 매립장 침출수 같은 중금속과 유기물을 함께 함유하고 있는 폐수를 처리하기위하여, Fe(III)을 활성탄, 모래, 불가사리와 같은 담체에 첨착 및 코팅시킨 흡착제를 사용하였다. 제조된 Iron Impregnated Activated Carbon(Fe-AC), Iron Coated Sand(ICS), Iron Coated Starfish(ICSF)는 EPA 3050B 방법을 통하여 각 매질에 함유된 철 함량을 분석하였으며, 회분식 반응조에서의 흡착실험을 통하여 각 흡착제의 Mn(II), Zn(II) 및 Cu(II)의 제거성능을 비교하였다. Fe-AC 및 ICS의 철 함유량은 각각 1,612 mg/kg 및 1,609 mg/kg으로서 매우 유사하였으며 ICSF의 철 함유량은 1,768 mg/kg으로 ICSF의 철 코팅함량이 다른 두 가지에 비해 150 mg/kg 정도 높게 나타났다. 회분식 실험에서의 Mn(II), Zn(II), Cu(II)의 제거효율은 ICSF, Fe-AC, ICS의 순으로 높은 제거율을 보였다. 각 흡착제를 단일 및 다중층으로 충전한 칼럼반응기에 의한 연속식 실험결과, 단일 흡착제에 비해 ICS, Fe-AC, ICSF의 순으로 충전한 시스템에서 높은 중금속 및 페놀제거효율을 나타내었으며, Cu(II)와 Zn(II)에 대해서는 뚜렷한 파과능을 보였으나 Mn(II) 제거율은 상대적으로 낮게 나타났다. 각 흡착제를 병합 충전한 다중층 칼럼반응시스템은 중금속 및 phenol제거에 효과적임을 알 수 있었다.

• 대한환경공학회지
• /
• 제36권6호
• /
• pp.396-401
• /
• 2014

나노물질은 다양한 분야에 널리 사용되고 있다. 본 연구에서는 Lactuca(상추)와 Raphanus(알타리무) 씨앗의 발아와 발아지수에 금속산화물 나노입자(CuO, NiO, $Fe_2O_3$, $Co_3O_4$, $TiO_2$, ZnO)가 미치는 영향을 조사하였다. 용액상 노출에서 CuO가 가장 큰 영향을 나타내었으며, 발아와 발아지수의 $EC_{50}$는 각 0.46 mg/L와 0.37%로 조사되었다. 씨앗 이용 식물독성 측정에서 상추가 알타리무보다 나노입자 노출에 대해 더욱 민감한 반응을 나타내었다. 일반적으로 나노입자의 씨앗발아와 발아지수에 근거한 영향은 다음의 순서로 조사되었다: CuO > ZnO >NiO > $TiO_2$, $Fe_2O_3$, $Co_3O_4$. 특히 $TiO_2$, $Fe_2O_3$와 $Co_3O_4$는 최대 노출 농도 1,000 mg/L 농도에서도 뚜렷한 영향을 나타내지 않았다.

• 한국환경보건학회지
• /
• 제19권3호
• /
• pp.29-35
• /
• 1993

This study was performed to obtain optimal conditions for reduction of color in dye wastewaters using coagulation-sedimentation processes with redox reactions. The reduction of color as well as organic matters variation was observed after coagulation-sedimentation processes using FeSO$_4$ $\cdot$ 7H$_2$O and NaOCl. Coagulation-redox reaction was done with the dose of Coagulant and oxidant at various pH values. Redox reaction was done through jar-mixing and aeration. The results of study were as follows: 1. In the coagulation-sedimentation processes using FeSO$_4$ $\cdot$ 7H$_2$O, color reduction was heigher at pH 3. With variance of dosage of FeSO$_4$ $\cdot$ 7H$_2$O, color reduction was higher at 250 mg/l. When coagulation-sedimentation using FeSO$_4$ $\cdot$ 7H$_2$O 250 mg/l was added at pH 3, the reduction of color, COD$_{Mn}$, and COD$_{Cr}$ showed 47.6%, 21.3% and 22.1%, respectively. 2. When NaOCI was added at level of 100 ppm in raw wastewater at pH 3, the reduction of color, COD$_{Mn}$, and COD$_{Cr}$ showed 30.2%, 5.5% and 6.2%, respectively. 3. After coagulation-sedimentation processes by addition of FeSO$_4$ $\cdot$ 7H$_2$O, when NaOCl was added at level of 250 mg/l in supernant, color reduction was 47.8% in aeration and 37.5% in jar-mixing. 4. Color reduction by aeration was higher than that by jar-mixing.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.297-297
• /
• 2022

Wheat is the staple food crop in the word, but wheat products have a low bioavailability of iron and zinc. So in the developing world, where wheat is a staple food, it suffers from micronutrients deficiency. This study was conducted to generate wheat varieties with enhanced grain Zn and Fe contents. Sixty wheat resource were cultivated over 2 years (2019-2021) in the field of NICS, Jeonju, Republic of Korea, to identify agronomic traits. Wheat grains were ground using grinder and analyzed whole wheat flour protein contents and Fe and Zn contents using ICP-OES. The average contents of Zn and Fe grain were 4.6 mg/100g (2.4~8.8 mg/100g) and 4.5 mg/100g (2.4~7.9 mg/100g), respectively. The contents of Fe and Zn in the wheat grain had a positive correlation with the protein content of whole wheat flour, but there was no correlation with heading date (4.22~5.27) and the thousand kernel weight (21.3~57.5 g). Although there was year variation, six resources with high contents of Fe (>5.2 mg/100 g) and Zn (>5.3 mg/100 g) grain in 2 years were selected. These results provide information for selecting breeding materials for biofortified wheat, and further studies on germplasms genetic variations and bioavailability are needed.

• 한국수산과학회지
• /
• 제42권2호
• /
• pp.93-103
• /
• 2009

To measure the mineral contents of marine invertebrates, we collected 239 individuals from 52 species from the east (Pohang), west (Gunsan), and south (Tongyeong) coasts of Korea: 34 species of molluscan shellfish (Gastropoda and Bivalvia), 6 species of Cephalopoda, 8 species of Crustacea, and 4 other species. The mean contents of the macro mineral in the 100g edible portion of molluscan shellfish were high in the oder of Na (355.1 mg), P (128.1 mg), K (110.8 mg), Mg (83.8 mg) and Ca (57.5 mg). And the mean contents of the micro mineral in the molluscan shellfish were high in the oder of Fe ($41.12{\mu}g/g$), Zn ($30.48{\mu}g/g$), Mn ($3.81{\mu}g/g$), Cu ($3.49{\mu}g/g$) and Ni ($0.35{\mu}g/g$). We could not observe clear regional variation in the mineral content of the molluscan shellfish species. The mean contents of the macro mineral in the 100g edible portion of other marine invertebrates (Cephalopoda, Crustacea, etc.) were high in the oder of Na (400.7 mg), P (145.1 mg), K (105.0 mg), Mg (63.2 mg) and Ca (49.0 mg). And the mean contents of the micro mineral in other marine invertebrates were high in the oder of Zn ($24.4{\mu}g/g$), Fe ($13.8{\mu}g/g$), Cu ($4.88{\mu}g/g$), Mn ($2.14{\mu}g/g$) and Ni ($0.12{\mu}g/g$). The daily average intakes of the macro mineral through fisheries products consisted of P (125.9 mg), Na (119.3 mg), K (101.8 mg), Ca (31.0 mg), Mg (27.6 mg). And the daily average intakes of the micro mineral through fisheries products consisted of Zn (0.92 mg), Fe (0.68 mg), Cu (0.12 mg) and Mn (0.07 mg). The respective intakes of the minerals (P, Mg, Na, Ca, K) from fish were about 18.0, 7.9, 8.0, 4.4 and 2.2% of the dietary reference intakes for Koreans (KDRIs) set by the Korean Nutrition Society. And the respective intakes of micro mineral (Cu, Zn, Fe, Mn) from fish were about 14.6, 9.2, 6.7, and 2.1% of the dietary reference intakes for Koreans (KDRIs). Therefore, fisheries products play a very important role as a source of mineral.

• 한국산업보건학회지
• /
• 제7권1호
• /
• pp.113-131
• /
• 1997

This study was performed to evaluate the exposure levels of worker exposed to welding fume and metals in confined spaces of a shipyard. The airborne concentration of welding fumes and metal elements in confined spaces were compared with those in open working areas. Results of the study were as follows. 1. The geometric mean of welding fume concentration in a confined space was $16.6mg/m^3$, which contained $3.9mg/m^3$ Fe, $1.2mg/m^3$ Mg, $0.8mg/m^3$ Zn, $0.008mg/m^3$ Cu, $0.008mg/m^3$ Pb, $0.005mg/m^3$ Ni, $0.003mg/m^3$ Cr, $0.003mg/m^3$ Cd. The geometric mean of welding fume concentration in open working areas was $5.2mg/m^3$, which contained $1.1mg/m^3$ Fe, $0.3mg/m^3$ Mg, $0.3mg/m^3$ Zn, $0.004mg/m^3$ Cu, $0.008mg/m^3$ Pb, $0.005mg/m^3$ Ni, $0.003mg/m^3$ Cr, $0.0003mg/m^3$ Cd. The geometric mean of welding fume concentration in confined spaces was 3,2 times higher than that in open working areas. The geometric mean concentrations of such metals as Fe, Mg, Zn, or Cu within fume in confined spaces were 2-4 times higher than those in open working areas, while little difference made such metals as Pb, Ni, Cr, Cd. 2. In 32 samples out of a total of 39 samples (82.1%) collected in confined spaces, the concentrations of welding fume exceeded TLV. while so did 19 samples out of 33 samples (57.6%) in open working areas. As for the concentrations of metals in welding flume from confined spaces, Fe exceeded TLV in 14 out of a total of 38 samples (36.8%), Mn exceeded TLV in 23 out of a total of 38 samples (60.5%). As for the concentration of metals in welding fume from open working areas, Fe exceeded TLV in 3 out of a total of 34 samples (8.8%), Mn exceeded TLV in 6 out of a total of 34 samples (17.6%). Considering additive effect among metals, in 31 out of a total of 39 samples (79.5%) collected in confined spaces, the concentrations of welding fume exceeded TLV, while so did 14 out of 38 samples (55.6%) in open working areas. 3. In respect of base metal and welding type the concentration of total welding fume by $CO_2$ gas W./mild steel was the highest, followed by semiauto MMA/mild steel, then followed by TIG or $CO_2$ gas W./stainless steel. ; as for concentration of metal within fume, a decreasing order was Fe, Zn, Mn, and Pb in $CO_2$ gas W./mild steel and semiauto MMA/mild steel, but Fe, Mn, Cr, and Ni in TIG or $CO_2$ gas W./stainless steel. 4. In case of welding base metal covered by paint, contents of Zn within red paint chip and within gray paint chip were 14.0% and 0.08% respectively, which showed a little difference, while the airborne concentrations of Zn within fume during welding base metal covered red paint and gray paint were $1.351mg/m^3$ and $1.018mg/m^3$ respectively, which showed little difference. As for Pb, contents of red paint chip and gray paint chip were 0.14% and 0.08% respectively, and the airborne concentrations within fume during welding base metal covered red paint and gray paint were $0.009mg/m^3$ and $0.007mg/m^3$ respectively, both of which showed little difference.

• 자원환경지질
• /
• 제21권1호
• /
• pp.29-44
• /
• 1988

석류석과 사방휘석의 평형관계를 20-45kb, $975-1400^{\circ}C$, FMAS시스템에서 상호역반응 실험을 통해서 연구하였으며 반응 촉매제로써 사용한 PbO와 0.55 $PbF_2$의 혼합물은 매우 효과적이었다. Fe-Mg의 교환반응은 이 실험온도, 압력범위 내에서는 조성성분의 영향을 받지 않는다. 실험결과와 석류석의 혼합 모델을 사용한 석류석-사방휘석의 지질온도계는 다음과 같다. $$T^{\circ}C=(1971+11.91P(Kb)+1510(X_{Ca}+X_{Mn})^{Gt}/(lnK_D+0.96)-273$$.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2013년도 춘계학술대회 논문집
• /
• pp.112-113
• /
• 2013

Thin CrAlMgSiN films, whose composition were 30.6Cr-11.1Al-7.3Mg-1.2Si-49.8N (at.%), were deposited on steel substrates in a cathodic arc plasma deposition system. They consisted of alternating crystalline Cr-N and AlMgSiN nanolayers. After oxidation at $800^{\circ}C$ for 200 h in air, a thin oxide layer formed by outward diffusion of Cr, Mg, Al, Fe, and N, and inward diffusion of O ions. Silicon ions were relatively immobile at $800^{\circ}C$. After oxidation at $900^{\circ}C$ for 10 h in air, a thin $Cr_2O_3$ layer containing dissolved ions of Al, Mg, Si, and Fe formed. Silicon ions became mobile at $900^{\circ}C$. After oxidation at $900^{\circ}C$ for 50 h in air, a thin $SiO_2-rich$ layer formed underneath the thin $Cr_2O_3$ layer. The film displayed good oxidation resistance. The main factor that decreased the oxidation resistance of the film was the outward diffusion and subsequent oxidation of Fe at the sample surface, particularly along the coated sample edge.

• 한국식품영양과학회지
• /
• 제10권1호
• /
• pp.61-65
• /
• 1981

The diets of Gwangju and Yeosu city residents, nutrition survey was carried out both 1979 and 1980 year. 1. Average intake of nutritional elements for an adult per day was 654.88 gr. 2. Average Calorie distribution of the nutritional elements per adult per day was 17.85% for protein, 79.35% for carbohydrate, and 2.81% for Fat in Gwangju; 22.22% for protein, 73.88% for carbohydrate and 3.91% for Fat in Yeosu. 3. The ratio of the animal protein to total protein consumed was 75.09% in average. The amount of ingested protein, animal protein and plant protein were 130.05gr., 97.65gr. and 32.39gr. respectively. 4. In aspect of Calorie, take-in calorie was 2749.38 cal. which was lower than the RDA (3000 cal.). 5. In aspect of the minerals(Fe, Ca), the intake of Ca was 608.47mg. in Gwangju, but 491.89mg. in Yeosu. The intake of Fe in Gwangju and Yeosu were 13.21mg. and 10.22mg. respectively. The RDA for Fe, Ca were 600mg. and 10mg. respectively. 6. The amount of intaked thiamine and riboflavin were 1.48mg. and 1.01mg. respectively. The RDA of thiamine and riboflavin were 1.5mg. and 1.8mg. respectively.

• 한국산학기술학회논문지
• /
• 제18권11호
• /
• pp.118-123
• /
• 2017

다양한 산업에 사용되고 있는 금속급 실리콘(MG-Si, Metallurgical grade silicon)을 제조하기 위해 실리콘 원료 내 가장 많이 함유하고 있는 불순물인 알루미늄(Al) 및 철(Fe)을 제거하고자 산(Acid) 침출 실험을 수행하였다. 5가지 종류의 산(HCl, HF, H2SO4, HNO3, H3PO4)을 1, 2, 4, 6M로 조제하여 실리콘 원료에 반응시킨 결과, 1M 농도의 HF가 가장 우수한 Al 및 Fe 제거율을 나타내었으며 각각 97.9%와 95.2로 나타났다. 그러나 HF는 실리콘 부식 특성으로 인해 18% 가량의 수율 감소가 발생하였으며 이러한 수율감소를 최소화하기 위해 두 번째로 제거율이 우수하게 나타난 2M HCl과 혼합하여 실리콘 원료에 적용하였다. 혼합용액의 최적조건을 선정하기 위해 실험을 수행하여 $80^{\circ}C$, 2시간의 침출 최적조건으로 결정되었으며 이 혼합용액의 적용 결과 Al 및 Fe 잔류농도가 각각 141 ppmw 및 93ppmw로 나타나 3N급의 순도를 갖는 금속급 실리콘을 제조하기에 매우 용이한 것으로 확인되었다.