• 한국약용작물학회지
• /
• 제9권4호
• /
• pp.275-279
• /
• 2001

품질관련 성분 중 총질소, 총아미노산, 엽록소 및 비타민 C는 $CO_2$ gas 3시간 혐기처리가 타처리에 비해 함량이 약간 많았으며, 탄닌은 공기 처리가 카페인은 진공처리에서 함량이 약간 많은 경향이었다. 유리당은 $CO_2$ gas 처리가 2,050mg/100g으로 타처리에 비해 ${31{\sim}449mg/100g}$정도 많았다. 혐기처리시 GABA와 alanine이 축적되는데, GABA함량은 ${N_2\;CO_2}$ gas 처리가 무처리 (350mg/100g)에 비해 215mg/100g과 264mg/100g으로 $6{\sim}8$배 많았다. 제다품질은 무처리 80.4점에 비해 $N_2$, $CO_2$ gas 처리 각각 80.0, 80.3점으로 차이가 거의 없었으나, 공기 및 진공처리는 각각 78.3, 78.9점으로 약간 품질이 저하되는 경향이었다. $N_2$나 $CO_2$ gas처리 후 제다된 녹차는 기능성분인 GABA함량이 무처리에 비해 $6{\sim}8$배 많고, 제다 품질도 양호하였다.

• 한국세라믹학회지
• /
• 제23권3호
• /
• pp.53-61
• /
• 1986

A gas sensor which has been made by wet process had fabricated by coating each of the mixture on alumina tube and firing at 85$0^{\circ}C$ for 3hrs. A gas concentration such $H_2$, CO, $C_3H_8$, $C_2H_2$ and $CH_4$ vs its detection voltage characteristics has been in-vestigated on $SnO_2-In_2O_3-MgO$ system doped with PdO, $La_2O_3$, $ThO_2$, NiO and $Nb_2O_5$ The optimum sensitivity composition for various gases were 90w/o $SnO_2$-9w/o $In_2O_3$-1w/o MgO for $H_2$, $C_2H_2$ CO and $C_3H_8$ and 95w/o $SnO_2$-4w/o $In_2O_3$-1w/o MgO for $CH_4$. The sample which has been made by wet process than dry process had predominated sensitivity for each gases and particle size of the sample coprecipitated with PH=9 was 0.1${\mu}{\textrm}{m}$ The $SnO_2$-In2_O_3-MgO$ system doped with 2w/o $Nb_2O_5$ and NiO was the most sensitive for $H_2$ and $C_2H_2$ gas. In $SnO_2$-In2_O_3-MgO$ system doped with $ThO_2$ the sensitivity of $H_2$ gas was decreased but CO gas was in-creased when dopant con was increased.

• 한국환경과학회지
• /
• 제24권12호
• /
• pp.1629-1637
• /
• 2015

To develop various usable water from coal seam gas (CSG) water that needs to be pumped out from coal seams for methane gas production, a feasibility study was carried out, evaluating and analysing a recent report (Coal Seam Gas Water Management Policy 2012) from Queensland State Government in Australia to suggest potential CSG water treatment options for fit-for-purpose usable water production. As CSG water contains intrinsically high salinity-driven total dissolved solid (TDS), bicarbonate, aliphatic carbon, $Ca^{+2}$, $Mg^{+2}$ and so on, it was found that appropriate treatment technologies are required to reduce the hardness below 60 mg/L as $CaCO_3$ by setting the reduction rates of $Ca^{+2}$, $Mg^{+2}$ and Na+ concentrations, as well as TDS reduction. Also, Along with fiber filtration and membrane separation, an oxidation degradation process was found to be required. Along with salinity reduction, as CSG water contains organic compounds (TOC: 248 mg/L, $C_6-C_9$: <20 mg/L and $C_{10}-C_{36}$: <60 mg/L), compounds with relatively high molecular weights ($C_{10}-C_{36}$) need to be treated first. Therefore, this study suggests a combined system design with filtration (Reverse osmosis) and oxidation reduction (electrolysis) technologies, offering proper operating conditions to produce fit-for-purpose usable water from CSG water.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.77-77
• /
• 2011

These days, a growing demand for memory device is filled up with the flash memory and the dynamic random access memory (DRAM). Although DRAM is a reasonable solution for current demand, the universal novel memory with high density, high speed and nonvolatility, needs to be developed. Among various new memories, the magnetic random access memory (MRAM) device is considered as one of good candidate memories because of excellent features including high density, high speed, low operating power and nonvolatility. The etching of MTJ stack which is composed of magnetic materials and insulator such as MgO is one of the vital process for MRAM. Recently, MgO has attracted great interest in the MTJ stack as tunneling barrier layer for its high tunneling magnetoresistance values. For the successful realization of high density MRAM, the etching process of MgO thin films should be investigated. Until now, there were some works devoted to the investigations on etch characteristics of MgO thin films. Initially, ion milling was applied to the etching of MgO thin films. However, ion milling has many disadvantages such as sidewall redeposition and etching damage. High density plasma etching containing the magnetically enhanced reactive ion etching and high density reactive ion etching have been employed for the improvement of etching process. In this work, inductively coupled plasma reactive ion etching (ICPRIE) system was adopted for the improvement of etching process using MgO thin films and etching gas mixes of $CH_4$/Ar and $CH_4$/$O_2$/Ar have been employed. The etch rates are measured by a surface profilometer and etch profiles are observed using field emission scanning emission microscopy (FESEM). The effects of gas concentration and etch parameters such as coil rf power, dc-bias voltage to substrate, and gas pressure on etch characteristics will be systematically explored.

• 한국식품과학회지
• /
• 제28권6호
• /
• pp.1177-1179
• /
• 1996

식품포장재에 함유되어있는 톨루엔 및 잔류용제를 용출분석하는 방법으로 headspace gas chromatography (static headspace method)를 이용하였다. 5종(methanol, isopropyl alcohol, ethyl acetate, methyl ethyl ketone, toluene)의 표준용제에 대한 머무름시간과 상대표준편차를 검토해 본 결과, 이상적인 머무름시간의 상대표준편차라 할 수 있는 0.15% 이하로 양호하였으며 재현성도 우수하였다. 인쇄된 포장재를 분석한 결과. 주로 methanol, toluene, methyl ethyl ketone이 검출되었고, methanol은 불검출${\sim}0.939\;mg/m^2$, toluene은 불검출${\sim}1.403{\;}mg/m^2$, methyl ethyl ketone은 불검출${\sim}0.932\;mg/m^2$ 함유 되어있는 것으로 나타났으며, 총 잔류 용제는 불검출${\sim}2.433{\;}mg/m^2$ 함유되어 있는 것으로 나타났다.

• Journal of Welding and Joining
• /
• 제3권1호
• /
• pp.40-45
• /
• 1985

Wire meling characteristics were examined with variation of gas formers such as $MgCO_3, CaCO_3 and Li_ 2CO_ 3$ by self-shielded flux cored arc welding. The flux cored wire of overlap type was welded by DCRP. The results obtainedareas follows. 1) Drop type was observed with no gas former, repelled type with MgCO_3$ added and short circuit type with $Li_2CO_3$ added. The variation of transfer mode was related to the blowing force of $CO_2$ gas and the surface tension of the slag. 2) Droplet size increased with adding gas formers due to the effect of $CO_2$ gas cushion. 3) Core spikes were observed more frequently with increasing the amount of gas formers.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 추계학술발표대회
• /
• pp.47.2-47.2
• /
• 2009

Ti 및 S를 함유하는 강종의 연속주조시 노즐막힘 현상이 자주 발생한다. 이러한 강종의 연주기술과 생산성을 향상 시키기 위해서는 노즐막힘 발생을 방지하기 위한 새로운 기술의 개발이 필요하다. 노즐막힘은 노즐내벽에 개재물의 부착으로 인해 발생되는 것으로 용강의 물성 혹은 내화물 재질의 개선을 통하여 방지하거나 저감할 수 있다. 본 연구에서는 노즐내 용강에 Mg 증기를 취입하였을 때의 내화물과 용강 계면에서의 반응 및 현상에 대하여 조사하고 내화물/용강계면에서의 생성물 분석과 용강중 S와 Ti의 농도에 따른 노즐 내화물과의 접촉각을 측정하였다. Mg증기는 MgO-Al 혼합물을 가열함으로 Al에 의한 Mg 의 환원반응에 의해 발생되며, 온도와 MgO와 Al 분말의 입도에 따른 Mg증기 발생거동에 대하여 고찰한다.

• Bulletin of the Korean Chemical Society
• /
• 제34권9호
• /
• pp.2691-2696
• /
• 2013

The electronic cigarette (E-cigarette) is a battery-powered device that aerosolizes nicotine so that it is readily delivered into the respiratory tract. The analytical data regarding the substances present in E-cigarettes are very limited. The aim of this study was to measure the concentration of aldehydes-formaldehyde (FA), acetaldehyde (AA) and, acrolein (AL)-in 225 replacement liquid brands from 17 E-cigarette shops sold in the Republic of Korea by headspace solid-phase micro extraction and gas chromatography-mass spectrometry (HS-SPME GC-MS). The concentration range of FA and AA was 0.02-10.09 mg/L (mean = 2.16 mg/L, detected in 207 of 225 samples) and 0.10-15.63 mg/L (mean = 4.98 mg/L, detected in all samples), respectively. AL was not detected in any of 225 replacement liquids. FA and AA were originally present in almost all replacement liquids of electronic cigarettes.

• 한국환경보건학회지
• /
• 제22권3호
• /
• pp.72-80
• /
• 1996

This study was carried to investigate the biodegradability of phenol wastewater in the sluge blanket-packed bed reactor(SBPBR). The reactor consisted of two regions. The lower region was a sludge blanket of 0.5 m height and the upper region was a packed-bed. The phenol and COD concentration of the effluent, the gas production and the composition of gas were measured to determine the performance of the anaerobic wastewater treatment system as the phenol concentration of the influent was increased from 600 to 1800 mg/l. Stable biodegradation of phenol wastewater could be achieved with the anaerobic treatment system from 600 to 1200 mg/l of the influent phenol concentration. But the SBPBR system was getting more serious at 1800 mg/l of influent phenol concentration. At the steady state of the influent phenol concentration of 600-1200 mg/l, the treatment performance showed the phenol removal efficiency of 94.5~96.3%, the COD removal efficiency of 93.3~96% and the gas production of 4.94~9.64 l/day.

• 한국세라믹학회지
• /
• 제54권4호
• /
• pp.303-307
• /
• 2017

Pure $In_2O_3$, 0.5 and 1.0 wt% Mg doped $In_2O_3$ hollow spheres were synthesized by ultrasonic spray pyrolysis of a solution containing In-, Mg-nitrate and sucrose and their gas sensing characteristics to 5 ppm $C_2H_5OH$, p-xylene, toluene, and HCHO were measured at 250, 300 and $350^{\circ}C$. Although the addition of Mg decreases the specific surface area and the volume of meso-pores, the gas response (resistance ratio) of the 0.5 wt% Mg doped $In_2O_3$ hollow spheres to 5 ppm $C_2H_5OH$ at $350^{\circ}C$ (69.4) was significantly higher than that of the pure $In_2O_3$ hollow spheres (24.4). In addition, the Mg doped $In_2O_3$ hollow spheres showed the highest selectivity to $C_2H_5OH$. This was attributed to the dehydrogenation of $C_2H_5OH$ assisted by basic MgO into reactive $CH_3CHO$ and $H_2$.