• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.366-366
• /
• 2010

Single crystalline Fe/NiO bilayers were epitaxially grown on Ag(001) and on MgO(001), and investigated by Low Energy Electron Diffraction (LEED), Magneto-Optic Kerr Effect (MOKE), and X-ray Magnetic Linear Dichorism (XMLD). We find that while the Fe film has an in-plane magnetization in both Fe/NiO/Ag(001) and Fe/NiO/MgO(001) systems, the NiO spins switch from out-of-plane direction in Fe/NiO/MgO(001) to in-plane direction in Fe/NiO/Ag(001). These two different NiO spin orientations generate remarkable different effects that the NiO induced magnetic anisotropy in the Fe film is much greater in Fe/NiO/Ag(001) than in Fe/NiO/MgO(001). XMLD measurement shows that the much greater magnetic anisotropy in Fe/NiO/Ag(001) is due to a 90o-coupling between the in-plane NiO spins and the in-plane Fe spins which causes a switching of the NiO spins during the Fe magnetization reversal.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.304-304
• /
• 2011

We investigated the effect of different spin direction of anti-ferromagnetic layer on the magnetic properties of ferromagnetic layer in Fe-NiO and Fe-CoO bi-layer systems. For Fe-NiO system, we prepared the clean MgO(001) surface half-covered with 20 nm Ag films as a substrate for magnetic layers. Then we grew NiO wedge layers on the substrate, and added 8 monolayer(ML) Fe layers on the wedge layer. We examined magnetic properties of the bi-layer system using the surface magnetic optical Kerr effect(SMOKE) and X-ray magnetic linear dichroism(XMLD). From SMOKE measurement we observed the coercivity enhancement due to the set-up of anti-ferromagnetic order of NiO films in both of the Fe/NiO/MgO(001) and Fe/NiO/Ag/MgO(001) system. The most remarkable results in our observation is that the coercivity enhancement of Fe/NiO/Ag/MgO(001) is much larger than that of Fe/NiO/MgO(001). XMLD experiments confirmed the out-of-plane spin direction of NiO layers in Fe/NiO/MgO(001) and in-plane spin-direction of NiO layers in Fe/NiO/Ag/MgO(001), and we concluded that the origin of large enhancement of coercivity is due to the strong parallel coupling between Fe layers and NiO layers. We also confirmed that this strong parallel coupling maintained across the thin Ag layer inserted between Fe and NiO layers. For Fe-CoO system, we prepared Fe/CoO/Ag(001) and Fe/CoO/MnO(001) systems and observed much larger coercivity enhancement in Fe/CoO/Ag(001).

• Transactions on Electrical and Electronic Materials
• /
• 제1권2호
• /
• pp.32-37
• /
• 2000

Effect of alloying element additions to Ag on thermal conductivity and electrical conductivity of sheath materials for Bi-Pb-Sr-Ca-Cu-O(BSCCO) tapes has been characterized. The thermal conductivity at low temperature range (10~300K) of Ag and Ag alloys were evaluated by both direct and indirect measurement techniqueas and compared with each other, It was observed that the thermal conductivity decreases with increasing the content of alloying element such as Au, Pd and Mg. Thermal conductivity of pure Ag at 3 0K was measured to be 994.0 W(m.K) on the other hand, the corresponding values of $Ag_{0.9995}Mg_{0.0005}$, $Ag_{0.974}$, $Au_{0.025}$, $Mg_{0.001}$, $Ab_{0.973}$, $Au_{0.025}$, $Mg_{0.002}$ and $Ag_{0.92}$, $Pb_{0.06}$, $Mg_{0.02}$ were 342.6, 62.1, 59.2 and 28.9 W(m.K), respectively, indicating 3 to 30 times lower than that of pure Ag. In addition, the thermal conductivity of pure Ag measured by direct and indirect measurement techniques was 303.2 and 363.8 W(m.K) The difference in this study is considered to be within an acceptable error range compared to the reference data.

• 반도체디스플레이기술학회지
• /
• 제21권1호
• /
• pp.71-74
• /
• 2022

For the process simplification in the fabrication of organic light emitting diode(OLED), top emission OLED (TEOLED) was fabricated without lithium fluoride(LiF) used as an electron injection layer (EIL). After co-deposition of Mg and Ag with a different process conditions, a cathode material adjacent to EIL was optimized when Mg and Ag have a ratio of 1:9 considering sheet resistance and transmittance. From the energy band diagram of TEOLED, band gap difference between Trisaluminium (Alq3) and Mg:Ag cathode show the difference of 0.4 eV according to the usage of LiF The fabricated TEOLED without LiF showed the improvement of 5.2 % and 2.7 % in the luminance and the current density comparing that with LiF. The results show there is no significant difference in OLED characteristics regardless of LIF layer in the TEOLED structures.

• Journal of Plant Biotechnology
• /
• 제36권1호
• /
• pp.18-22
• /
• 2009

돌나물 (Sedum sarmentosum)의 형질전환 및 유전자원 기내보존을 위한 효율적인 식물체 분화 체계를 확립하기 위하여, 잎절편 유래의 켈러스로부터 식물체 분화에 미치는 glutamine과 $AgNO_3$의 영향과 분화 식물체의 순화 후 생존율을 조사하였다. 캘러스 유도는 3 mg/L 2,4-D와 1 mg/L BA, 식물체 분화는 0.2 mg/L NAA와 3.0 mg/L BA를 각각 첨가한 MS배지를 사용하였다. 금산 수집종에서 glutamine 첨가는 50일째에 100%의 식물체 분화를 보였으며, 350mg/L glutamine 첨가시 켈러스당 17.6개의 가장 많은 식물체가 분화되었다. $AgNO_3$ 첨가배지에서도 금산 수집종은 100% 식물체 분화를 보였으며, $15{\mu}M$ 첨가배지에서 캘러스당 16.1개의 식물체가 분화되어 가장 양호하였다. 완주 수집종은 glutamine 첨가에 관계없이 식물체가 전혀 분화되지 않았고, $5-15{\mu}M$ $AgNO_3$ 첨가배지에서만 소수의 식물체가 분화되었다. 분화 식물체는 생장조절제를 첨가하지 않은 MS 배지로 옮겨 shoot생장과 발근을 유도한 다음, vermiculite와 perlite를 혼합한 인공토양에서 순화시킨 결과 88-100%의 생존율을 보였다. 생존 식물체들은 강모래:밭흙 (1:1, v/v)을 혼합한 토양에 정식한 후에도 양호한 생장을 보였으며, 모식물과 형태적으로 차이가 없었다.

• Journal of Acupuncture Research
• /
• 제35권1호
• /
• pp.21-27
• /
• 2018

Background: Examination of the effects of deer antler, old antler, and antler glue on postmenopausal osteoporosis in an ovariectomized Sprague-Dawley rat model. Methods: The study involved 7 experimental groups; SHAM (sham-operated rats), OVX (ovariectomized rats), E2 (ovariectomized rats with estradiol $10{\mu}g/kg$ daily, orally), DA (ovariectomized rats with deer antler extract 5.83 mg/kg), OA (ovariectomized rats with old antler extract 3.8 mg/kg), low-AG (ovariectomized rats with low dose of antler glue powder 12.5 mg/kg), high-AG (ovariectomized rats with high dose of antler glue powder 37.5 mg/kg). After 6 weeks of treatment, body weight, blood calcium, phosphorus, estradiol, liver [alkaline phosphatase (ALP), aspartate transaminase (AST), alanine transaminase (ALT)] and kidney [blood urea nitrogen (BUN)/creatinine ratio] function, and femoral bone mineral density (BMD) were measured. Results: The body weights of DA, OA, low-AG, and high-AG groups did not significantly differ from OVX group. Blood estradiol levels were significantly increased in the DA, low-AG, and high-AG groups compared to the OVX group. Blood calcium, phosphorus, ALP, AST, and ALT levels and BUN/creatinine ratio did not show significant changes in the DA, OA, low-AG, and high-AG groups. BMDs of the femur, and femoral head and neck were significantly increased in the low-AG group. In the OA group, the BMD of the femoral head and neck was significantly increased. Conclusion: Treatment with deer antler, or antler glue for 6 weeks was effective for increasing estradiol and femoral BMD in ovariectomized rats, suggesting that this may be of therapeutic benefit for osteoporosis.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.231-231
• /
• 2013

ZnO은 hexagonal wurtzite 구조를 갖는 직접 천이형 화합물 반도체로서, 상온에서 3.37 eV 정도의 wide band gap energy를 가지고 있으며, 60 meV의 큰 엑시톤 결합 에너지(exciton binding energy)를 갖는다. 또한 동종 기판이 존재하고 열, 화학적으로 안정한 상태이며 습식 식각이 가능한 장점으로 인해 각광받고 있다. 또한, ZnO 박막은 우수한 전기 전도성을 나타내며 광학적 투명도가 우수하기 때문에 투명전극으로 많이 이용되어 왔고, 태양 전지(solar cell), 가스 센서, 압전소자 등 많은 분야에서 사용되고 있다. 이와 같은 ZnO박막을 안정적인 쇼트키 다이오드 특성을 얻기 위해서는 쇼트키 배리어 장벽의 형성이 필수적이다. Mg을 ZnO에 첨가하여 MgZnO 박막을 형성할 경우, 금속의 일함수와 MgZnO의 전자친화력 차이가 증가하여 더 큰 쇼트키 장벽 형성이 가능하며, 금속의 일함수가 큰 물질을 사용해야 한다. 또한, 박막의 결함이 적은 박막을 형성해야 하는 에피탁셜 박막이 필요하다. SiC는 높은 포화 전자 드리프트 속도(${\sim}2.7{\times}107$ cm/s), 높은 절연 파괴전압(~3 MV/cm)과 높은 열전도율(~5.0W/cm) 특징을 가지고 있으며, MgZnO/Al2O3의 격자 불일치는 ~19%인 반면에 MgZnO/SiC의 격자 불일치는 ~6%를 가진다. 금속의 일함수가 큰 Ag 금속은 열처리가 될 경우 AgOx가 될 경우 더욱 안정적인 쇼트키 장벽을 형성될 수 있을 것으로 판단된다. 본 연구에서는 쇼트키 접합을 형성하기 위해 금속의 일함수가 큰 Ag 금속을 사용하였으며, Al2O3 기판과 6H-SiC 기판위에 MgZnO(30 at.%) 박막을 증착하였다. 증착 후에 Ag를 증착 한 뒤 급속 열처리를 하였다. 열처리된 MgZnO의 경우 열처리 하지않은 소자보다 약 $10^5$ 이상의 우수한 on/off 특성을 보였다.

• 한국주조공학회지
• /
• 제19권6호
• /
• pp.456-465
• /
• 1999

The overall objective of this study is to investigate the effect of Ag addition on the mechanical properties and microstructure of rapid solidified 7000 Al series alloys. Al-Zn-Mg-Cu alloys with small amounts of Ag was fabricated into the powder by gas atomization. The powder was extruded after the cold compaction and degassing and then followed by T6 heat treatment. Microstructure observation, phase analysis, room and high temperature tensile test and hardness test were pursued. The tensile strength and hardness of Ag-added alloy after heat treatment was increased with increasing Ag contents. However, the elongation of extruded alloys was not increased as much as to be expected. The reason of this result seems to be related to $the{\Omega}$ phase, which contribute to the high temperature strength stability of Al-Cu-Zn alloys through the formation of eutectoid with Ag addition.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2009년도 Korea Superconductivity Society Meeting 2009
• /
• pp.42-42
• /
• 2009

• 센서학회지
• /
• 제8권2호
• /
• pp.177-183
• /
• 1999

동일한 발광기능기를 가진 고분자물질, PU-BCN과 저분자물질 D-BCN은 다양한 구조의 EL소자에서 평가되었다. 발광기능기의 분자구조는 전자주입과 수송을 위한 두 개의 시아노기와 정공주입과 수송을 위한 두 개의 triphenylamin기로 구성된다. 두 개의 다른 종류의 물질인 PU-BCN과 D-BCN을 사용하여 다양한 종류의 EL소자가 만들어 졌는데 소자의 종류로는 Indium-tin oxide(ITO)/PU-BCN or D-BCN/MgAg 로 구성된 단층형 소자(SL) 그리고 ITO/PU-BCN or D-BCN/oxadiazole derivative/MgAg로 구성된 적층형 소자(DL-E) 그리고 OTO/triphenylamine derivative/D-BCN/MgAg 로 구성된 적층형 소자(DL-H)이다. 두종류의 물질, PU-BCN과 D-BCN은 높은 전류밀도에서 동일한 발광특성을 보였으며 단층형자에서 조차 뛰어난 EL특성을 보였다. 최대 EL 피이크는 약 640 nm 의 적색발광을 나타냈으며 형광 피이크와 일치했다.