• 제목/요약/키워드: Mg sulfate

검색결과 1,025건 처리시간 0.032초

The Effect of Chondroitin Sulfate against Oxidative Stress and Atherosclerosis In Ovariectomized Rat

  • Ha, Bae-Jin;Lee, Jin-Young
    • 대한약학회:학술대회논문집
    • /
    • 대한약학회 2002년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2
    • /
    • pp.290.1-290.1
    • /
    • 2002
  • The surgically ovariectomized rat induces aging by reactive oxyyen species(ROS) generation. Free oxygen radicals have been proposed as important causative agents of aging. The purpose of this study was to investigate the effect of Chondroitin Sulfate(CS) to prevent ovariectomy(OVX) induced oxidative stress and atherosclerosis. The OVX rats were given intraperitoneally CS at dose of 100mg/kg and 200mg/kg daily for fifteen weeks. (omitted)

  • PDF

Al-Si-Mg 합금의 산소 및 황화수소 환경에서의 고온부식 특성 (High Temperature Corrosion Characteristics of Al-Si-Mg Alloy in O2 and H2S/H2 Environments)

  • 이영환;손영진;이병우
    • 동력기계공학회지
    • /
    • 제21권2호
    • /
    • pp.14-19
    • /
    • 2017
  • The corrosion characteristics of Al-Si-Mg alloy were investigated in $O_2$ and $H_2S/H_2$ environments at high temperature. The weight gain and the reaction rate constant of the Al-Si-Mg alloy were measured in the oxygen and hydrogen sulfide environments at 773K. The weight gain of Al-Si-Mg alloy was showed parabolic increase in the oxygen and hydrogen sulfide environments. The reaction rate constants were confirmed to be $1.45{\times}10^{-4}mg^2cm^{-4}sec^{-2}$ in the oxygen environment and $6.19{\times}10^{-4}mg^2cm^{-4}sec^{-2}$ in the hydrogen sulfide environment respectively. As a result of XPS analysis on the specimen surface, $Al_2O_3$ and MgO compounds were detected in oxygen environment and $Al_2(SO_4)_3$ sulfate was detected in the hydrogen sulfide environment. Corrosion rate of Al-Si-Mg alloy was about 4.3 times faster in hydrogen sulfide environment than oxygen environment.

Heparin-Protamin Sulfate 상호작용의 실험적 연구

  • 김치경;이홍균
    • Journal of Chest Surgery
    • /
    • 제13권1호
    • /
    • pp.13-20
    • /
    • 1980
  • Heparin would have been used for preventing clotting of blood during extracorporeal circulation and subsequent use of protamine sulfate and made possible the neutralization of heparin. This procedure has been adopted for eliminating one of the great causes of bleeding, especially in cardiac surgery. In this experiment, the hypocoagulability of blood induced by heparin followed by neutralization with treatment of protamine sulfate were estimated by the Lee-White clotting time [CT], partial thromboplastin time [PTT] and protamine titration test. The results were as follows: 1] Comparison of clotting time between the heparinized [2.0 mg/kg] and non-heparinized dogs was done using CT and PT`I` of the blood. In heparinized group [Group I], the CT lasted infinitively and prolongation of PTT [4 times than normal] until 60 minutes. The CT [2 times] and PTT [3 times] has been shortened after 90 minutes, however they returned to normal limit level within 180 minutes. 2] The determination of appropriate ratio of heparin and protamine In vivo were performed. The group II [heparin 2.0 mg/kg, protamine 1.0 mg/kg] revealed rapid decrease of CT and PTT, but returned to normal after 120 minutes. The group III [heparin 2.0 mg/kg, protamine 2.0 mg/kg] returned rapidly to normal within 15 minutes. The group IV [heparin 2.0 mg/kg, protamine 3.0 mg/kg] recovered its normal level after 60 minutes. The group V [heparin 2.0 mg/kg, protamine 4.0 mg/kg] recovered its normal level after 90 minutes. 3] In the combined experimental study In vivo and vitro, the protamine titration test was done using the dog which were given 2.0 mg/kg and 3.0 mg/kg of heparin, respectively and coagulation time were checked after 15, 30, 60 and 120 minutes. The complete neutralization was showed to be heparin-protamine ratio of 1:1 to 1.5. 4] In vitro study, fresh blood was drawn into known amount of heparin content [20, 40, 60 and 100/ug per 1 ml of blood] syringe, thereafter protamine titration test was done. In all cases, the complete neutralization was found in heparin-protamine ratio of 1:0.85 to 1.5. 5] It was found by the present experiment that the ideal heparin-protamine ratio was 1:1 within 60 minutes and 1:0.5 after 60 minutes for avoiding the serious side effect due to overadministration of protamine sulfate.

  • PDF

Elution profiles of metronidazole from calcium sulfate beads

  • Burasarin Ithisariyanont;Saranya Poapolathep;Amnart Poapolathep;Pareeya Udomkusonsri
    • Journal of Veterinary Science
    • /
    • 제24권6호
    • /
    • pp.74.1-74.15
    • /
    • 2023
  • Background: Antibiotic beads are used to treat local bacterial infections by delivering high drug concentrations to infected tissue. Objectives: This study examined the elution characteristics of metronidazole from metronidazole-calcium sulfate (MCa) and metronidazole-calcium-potassium sulfate (MCaK) beads over 20 days and the antibacterial efficacy of the beads after storage. Methods: The MCa and MCaK beads were prepared by mixing 250 mg of metronidazole and 10 g of calcium sulfate hemihydrate with water and a 3% potassium sulfate solution, respectively. The beads were placed in phosphate-buffered saline for the elution study. The metronidazole eluents were determined using high-performance liquid chromatography. The microstructures were examined by scanning electron microscopy (SEM), and the antimicrobial activity was evaluated by a microbioassay. Results: For the 20-day study, the total amount of metronidazole released was greater in the MCa beads than in the MCaK beads by 6.61 ± 0.48 mg (89.11% ± 3.04%) and 4.65 ± 0.36 mg (73.11% ± 4.38%), respectively. The amounts of eluted drugs from the MCa and MCaK beads were higher than the minimum inhibitory concentration at 0.5 ㎍/mL against anaerobic bacteria at both 20 days and 14 days. SEM showed that calcium crystals on the outer surface had dissolved after elution, and thinner calcium crystals were prominent in the MCaK beads. The MCa and MCaK beads exhibited antibacterial activity after setting, followed by storage at room temperature or 4℃ for 21 days. Conclusions: The MCa beads could release more drug than the MCaK beads, but all eluted metronidazole amounts were effective in controlling bacterial infections. Both metronidazole beads could be stored at ambient temperature or in a refrigerator.

메타카올린 혼합 시멘트 경화체의 황산마그네슘 침식 및 성능저하 모드 (Magnesium Sulfate Attack and Deterioration Mode of Metakaolin Blended Cement Matrix)

  • 이승태
    • 콘크리트학회논문집
    • /
    • 제21권1호
    • /
    • pp.21-27
    • /
    • 2009
  • 본 연구는 메타카올린을 혼합한 시멘트 경화체의 황산마그네슘 침식 저항성을 평가하며, 관련 성능저하 모드를 고찰하기 위하여 수행되었다. 메타카올린의 대체율을 4단계로 조절하여 모르타르를 제조하였으며, 두 종류 황산마그네슘 용액 (0.424% 및 4.24% $MgSO_4$)에 360일 동한 침지한 후 재령별 외관조사 및 선형팽창 정도를 모니터링하였다. 아울러, XRD, DSC 및 SEM/EDS와 같은 기기분석 기법을 이용하여 황산마그네슘 용액에 침지한 메타카올린 혼합 시멘트페이스트 중에 생성된 반응생성물 조사 및 미세구조 분석을 실시하였다. 본 실험에서 수행한 실험 결과에 의하면, 메타카올린의 대체율이 증가할수록 모르타르의 황산마그네슘 저항성이 감소하는 경향을 나타내었다. 이러한 현상이 나타난 이유는 황산마그네슘 침식에 의하여 생성된 gypsum 및 thaumasite와 같은 반응생성물의 영향 때문인 것으로 판단된다.

염화동 폐액으로부터 양이온격막 전해 채취된 구리 분말을 이용한 황산동의 제조방법 연구 (Study on the Preparation of Copper Sulfate by Copper Powder using Cation Membrane Electrowinning Prepared from Waste Cupric Chloride Solution)

  • 강용호;현승균
    • 자원리싸이클링
    • /
    • 제28권1호
    • /
    • pp.62-72
    • /
    • 2019
  • 일반적으로, 황산동을 제조하기 위한 원료는 $H_2SO_4$ 및 Cu 금속이 사용된다. 본 연구는 폐산, 폐염화동 폐기물부터 전해 채취법을 이용하여 황산동을 제조하는 방법에 관한 것이다. 황산구리의 용도는 공업용, 도금용, 사료용, 농업용, 전자급 PCB 동도금에 사용된다. 종래의 황산동 제조법은 다량의 폐수 및 에너지 비용이 높은 문제점이 있다. 구리(Cu) 화합물 중에서 가장 사용이 많이 되는 황산동($CuSO_4$)의 제조 방법에 관한 연구로서, 공정 운전비가 적고, 폐수 발생이 적으며, 제조 공정이 간단하다. 양이온 맴브레인을 이용하여 Na, Ca, Mg, Al을 불순물로서 제거하기 쉽다. 또한 동시에 전해 채취 방법으로 고 순도 구리 분말을 회수 할 수 있었다. 회수 된 구리 분말을 사용하여 고 순도 황산동을 제조 할 수 있었다.

염화마그네슘 존재 하의 비스(1,10-페난트롤린) 구리(II)-도데실황산나트륨 용액의 전기화학 (Electrochemistry of bis(1,10-phenanthroline)copper(II)-sodium dodecyl sulfate solution in the presence of MgCl2)

  • 고영춘
    • 분석과학
    • /
    • 제20권6호
    • /
    • pp.483-487
    • /
    • 2007
  • 염화마그네슘 존재하의 비스(1,10-페난트롤린)구리(II) $(Cu(ph){_2}^{2+})$-도데실황산나트륨(SDS)의 전기화학적 거동들이 고찰되었다. $Mg^{2+}$의 첨가에 의한 SDS의 용액에서 $Cu(ph){_2}^{2+}$$E_{pa}$$E_{1/2}$ 값은 양의 값으로 이동했다. 1.0 mM $Cu(ph){_2}^{2+}$의 27 mM $MgCl_2$을 포함한 100mM NaCl 용액에서, ${\Delta}E_p$ 대 -log[SDS]로 도시한 그림에서 두 선의 교차점을 임계미셀농도로 결정하였다 (순환 전압전류법에 의해 3.48 mM SDS; 표면 장력법에 의해 3.34 mM SDS). $Cu(ph){_2}^{2+}$의 용액에 $Mg^{2+}$가 첨가되었을 때 유리탄소전극에서의 이중층의 거리가 감소했고 미셀형성이 지연되었다.

Thermochemical Sulfate Reduction Simulation Experiments on the Formation and Distribution of Organic Sulfur Compounds in the Tuha Crude Oil

  • Yue, Changtao;Li, Shuyuan;Song, He
    • Bulletin of the Korean Chemical Society
    • /
    • 제35권7호
    • /
    • pp.2057-2064
    • /
    • 2014
  • Thermochemical sulfate reduction (TSR) was conducted in autoclave on the system of crude oil and $MgSO_4$ at different temperatures. Gas chromatography pulsed flame photometric detector (GC-PFPD) was used to detected the composition of organic sulfur compounds in oil phase products. The results of the analysis indicate that with increased temperature, the contents of organic sulfur compounds with high molecular weight and thermal stability, such as benzothiophenes and dibenzothiophenes, gradually became dominated. In order to gain greater insight into the formation and distribution of organic sulphur compounds from TSR, positive ion electrospray Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) was used in detecting the detailed elemental composition and distribution of them. The mass spectra showed that the mass range of sulfur compounds was 200-550 Da. Four sulfur class species, $S_1$, $N_1S_1$, $O_1S_1$ and $O_2S_1$, were assigned in the positive-ion spectrum. Among the identified sulfur compounds, the $S_1$ class species was dominant. The most abundant $S_1$ class species increase associated with the DBE value and carbon number increasing which also indicates the evolution of organic sulfur compounds in TSR is from the labile series to the stable one. In pure blank pyrolysis experiments with crude oil cracking without TSR, different composition and distribution of organic sulfur compounds in oil phase products were seen from mass spectra in order to evaluate their pyrolysis behaviors without $MgSO_4$. FT-IR and XRD were used in analyzing the products of solid phases. Two distinct crystallographic phases MgO and $MgSO_4$ are found to coexist in the products which demonstrated the transformation of inorganic sulfur compounds into organosulfur compounds exist in TSR.

The Bioactivity of Natural Product in the Ovariectomized Rat

  • Ha, Bae-Jin
    • Journal of Life Science
    • /
    • 제11권1호
    • /
    • pp.47-51
    • /
    • 2001
  • To investigate the deaging effects of introperitoneally injected Chondroitin Sulfate (CS) on various enzyme activity (AST, ALT, MDA (Malon dialdehyde), SOD (Superoxide dismutase), GPx (Glutathione peroxidases) and histophathology of liver tissue, ovariectomized rats were used. The antioxidative effects of chondroitin sulfate (100 mg/kg and 200 mg/kg body weight) were investigated at the antioxidative enzyme activities of liver homogenate fractions (liver total homogenate, mitochondrial, and microsomal fractions) and sera. In addition, the rat liver was histologically examined. Intraperitoneally injected CS, depend on dosage, indicated a protective effect against ovariectomy-inducted aging. Moreover, inflammation and cirrhosis in liver tissue of CS treated group were significantly decreased. Based on these results, intraperitoneally injected CS is a useful material to delay aging.

  • PDF

Fenton 처리에 의한 페놀의 분해 특성 (Characteristics of Phenol Degradation by Fenton Treatment)

  • 최석순;염승호;차형준
    • 환경위생공학
    • /
    • 제12권2호
    • /
    • pp.29-35
    • /
    • 1997
  • Phenol, often discharged from petroleum and fine chemical industries is potential carcinogen and was classified into priority pollutant by EPA in USA. It causes serious environmental and health problem if discharged to the environment such as soil or aquifer. The removal efficiency of phenol and COD using Fenton treatment(Hydrogen Peroxide and Ferrous Sulfate) was observed and biodegradability (BOD$_{5}$/COD$_{cr}$) of reaction products were also examined. When 50 mg/l of phenol was treated by Fenton's Reagent(50 mg/l of hydrogen peroxide and 900 mg/l of ferrous sulfate), the removal efficiency of phenol and COD was 100% and 80% respectively in 10 minutes, which suggested this method can be used as actual phenol removal process. The initial biodegradability of 500 mg/l phenol solution was 0.7 but decreased as hydrogen peroxide was increased.

  • PDF