• Bulletin of the Korean Chemical Society
• /
• v.18 no.8
• /
• pp.831-840
• /
• 1997

Core/shell structured composite metal oxides of Fe2O3/MgO were prepared by thermal decomposition of Fe(acac)3 adsorbed on the surface of MgO cores. The morphology of the composites conformed to that of the MgO used as the cores. Broad powder X-ray diffraction peaks shifted toward larger d, large BET surface area (∼350 m2/g), and the size of crystalline domains in nano range (4 nm), all corroborate to the nanocrystallinity of the Fe2O3/MgO composite which was prepared by using nanocrystalline MgO as the core. By use of microcrystalline MgO as the core, microcrystalline Fe2O3/MgO composite was prepared, and it had small BET surface area of less than 35 m2/g. AFM measurements on nanocrystalline Fe2O3/MgO showed a collection of spherical aggregates (∼80 nm dia) with a very rough surface. On the contrary, microcrystalline Fe2O3/MgO was a collection of plate-like flat crystallites with a smooth surface. The nitrogen adsorption-desorption behavior indicated that microcrystalline Fe2O3/MgO was nonporous, whereas nanocrystalline Fe2O3/MgO was mesoporous. Bimodal distribution of the pore size became unimodal as the layer of Fe2O3 was applied to nanocrystalline MgO. The macropores in a wide distribution which the nanocrystalline MgO had were absent in the nanocrystalline Fe2O3/MgO. The decomposition of CCl4 was largily enhanced by the overlayer of Fe2O3 on nanocrystalline MgO making the reaction between nanocrystalline Fe2O3/MgO and CCl4 be nearly stoichiometric. The reaction products were environmentally benign MgCl2 and CO2. Such an enhancement was not attainable with the microcrystalline samples. Even for the nanocrystalline MgO, the enhancement was not attained, if not with the Fe2O3 layer. Without the layer of Fe2O3, it was observed that the nanocrystalline domain of the MgO transformed into microcrystalline one as the decomposition of CCl4 proceeded on its surface. It appeared that the layer of Fe2O3 on the particles of nanocrystalline Fe2O3/MgO blocked the transformation of the nanocrystalline domain into microcrystalline one. Therefore, in order to attain stoichiometric reaction between CCl4 and Fe2O3/MgO core/shell structured composite metal oxide, the morphology of the core MgO has to be nanocrystalline, and also the nanocrystalline domains has to be sustained until the core was exhausted into MgCl2.

• Journal of Environmental Health Sciences
• /
• v.38 no.2
• /
• pp.136-141
• /
• 2012

Objectives: The objective of this study was to investigate whether the ammonia nitrogen concentration of aqueous samples such as drinking water can be determined by measuring the saturation of the samples colored by indophenol method. Methods: A color saturation measurement system was constructed by connecting a notebook computer to an image acquisition device composed of a PC camera and a light source, and was then used to measure the saturation of samples colored by blue indophenol complex. Results: Between two available light sources, a fluorescent lamp was selected due to its demonstrating better linearity between color saturation and ammonia nitrogen concentration. Prediction by quadratic regression was more accurate than by linear regression, and prediction by quadratic regression in the concentration range of 0.1-1.0 $mg/l$ was more accurate than in the concentration range of 0.0-1.0 $mg/l$. Regression-based predictions over 0.25 $mg/l$, 0.55 $mg/l$ and 0.75 $mg/l$ concentrations were implemented both by spectrophotometric method and by measuring color saturation. In the case of 0.25 $mg/l$, the predicted concentration by spectrophotometric method was $0.256{\pm}0.0076\;mg/l$ and the predicted concentration by measuring color saturation was $0.246{\pm}0.0086\;mg/l$ (p=0.051). In the case of 0.55 $mg/l$, they were $0.561{\pm}0.0068\;mg/l$ and $0.564{\pm}0.0166\;mg/l$ (p=0.660). In the case of 0.75 $mg/l$, they were $0.755{\pm}0.0139\;mg/l$ and $0.762{\pm}0.0088\;mg/l$ (p=0.215). Conclusions: There were no statistically significant differences (p>0.05) between the data from the two methods in all three of the concentrations. Therefore, the color saturation measurement method proposed in this paper may be considered applicable for determining the ammonia nitrogen concentration of aqueous samples such as drinking water.

• Journal of Ceramic Processing Research
• /
• v.20 no.6
• /
• pp.609-616
• /
• 2019

The optimum powder to ball ratio was examined, which is one of the important conditions in reactive mechanical grinding processing. Yttria (Y2O3)-stabilized zirconia (ZrO2) (YSZ), Ni, and graphene were chosen as additives to enhance the hydriding and dehydriding rates of Mg. Samples with a composition of 92.5 wt% Mg + 2.5 wt% YSZ + 2.5 wt% Ni + 2.5 wt% graphene (designated as Mg-2.5YSZ-2.5Ni-2.5graphene) were prepared by grinding in hydrogen atmosphere. Mg-2.5YSZ-2.5Ni-2.5graphene had a high effective hydrogen-storage capacity of almost 7 wt% (6.85 wt%) at 623 K in 12 bar H2 at the second cycle (n = 2). Mg-2.5YSZ-2.5Ni-2.5graphene contained Mg2Ni phase after hydriding-dehydriding cycling. Mg-2.5YSZ-2.5Ni-2.5graphene had a larger quantity of hydrogen absorbed for 60 min, Ha (60 min), than Mg-2.5Ni-2.5graphene and Mg-2.5graphene. The addition of YSZ also increased the initial dehydriding rate and the quantity of hydrogen released for 60 min, Hd (60 min), compared with those of Mg-2.5Ni-2.5graphene. Y2O3-stabilized ZrO2, Ni, and graphene-added Mg had a higher initial hydriding rate and a larger Ha (60 min) than Fe2O3, MnO, or Ni and Fe2O3-added Mg at n = 1.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.6
• /
• pp.1733-1738
• /
• 2008

The treatment efficiency of rotating biological contactors (RBCs) for the high strength of dairy wastewater was investigated. Two different systems were conducted composing of a single RBC with tapered aeration reactors for the system A and a sequential RBCs following tapered aeration reactors for the system B. Experiments using dairy wastewater were conducted for 50 days period of time, in which hydraulic rates were maintained at the constant ratios of 346L per day and variable BOD concentrations were at the range from 1,358mg/L to 829mg/L, the $COD_{cr}$, concentration of the range were from 2,384mg/L to 1,329mg/L, the range of T-N concentrations was from 66mg/L to 38mg/L, and 50% of internal recycle and 50% of sludge return were performed. Results indicated that the removal efficiencies of the system B were higher than those of the system A. The removal efficiencies of system A for the BOD, $COD_{cr}$, T-N and T-P were 97.8%, 96.7%, 87.2% and 82%, respectively. The removal efficiencies of system B for the BOD, $COD_{cr}$, T-N and T-P were as of 98.5%, 98.5%, 91.3% and 89%.

• Journal of Food Hygiene and Safety
• /
• v.16 no.4
• /
• pp.315-323
• /
• 2001

This study was concentrated that the contents of heavy metals were estimated from 782 samples of sold fisheries in Seoul(33 species in fishes, 15 in bivalves, 12 in crustaceans and 10 in others) by Atomic Absorption Spectrometer. The contents of As, Cd and Pb [minimum~maximum (mean)] were N.D.~0.162 mg/kg(0.021),0.001~0.120 mg/kg(0.014) and 0.015~0.499 mg/kg(0.111) in fishes, 0.003~0.311 mg/kg(0.052), N.D.~1.905 mg/kg(0.182) and 0.013~0.462 mg/kg(0.138) in bivalves, N.D.~0.328 mg/kg(0.042), 0.002~1.113mg/kg(0.079) and 0.006~-.510 mg/kg(0.109) in crustaceans, N.D. ~0.181 mg/kg(0.024), 0.001~0.214 mg/kg(0.033) and 0.010~0.877 mg/kg(0.118) in others respectively, bivalves were the highest than others. The average weekly intakes of three metals from sold fisheries took about 1.4~26.4% of PTWI (provisional tolerable weekly intakes) that FAO/WHO Joint Food Additive and Contaminants Committee had set to evaluate their safety.

• Korean Journal of Soil Science and Fertilizer
• /
• v.31 no.4
• /
• pp.373-379
• /
• 1998

Fly ash application with a rate 0, 50, 100, $150Mg\;ha^{-1}$ in clay loam paddy, which had properties of pH 5.3 and low contents of silicate, gave a positively residual effects on the growth of rice crop subsequent to malting barley. The responses of rice yields to fly ash application were in the order of bituminous coal fly ash(BCFA) 100 > 150 > 50 > anthracite fly ash(AFA) 50 > 100 > none > AFA $150Mg\;ha^{-1}$. As a result, yields responses of milled rice were ranged from $6.2(50Mg\;ha^{-1}){\sim}14.4%(100Mg\;ha^{-1})$ by BCFA and from $-0.6(150Mg\;ha^{-1}){\sim}6.6%(50Mg\;ha^{-1})$ by AFA showing maximum yields of 5.084 and $4.738Mg\;ha^{-1}$ by the former and the latter, respectively. Rice plant showed lodging indices ranging from $20(50Mg\;ha^{-1}){\sim}40%(150Mg\;ha^{-1})$ by BCFA and from $1.3(150Mg\;ha^{-1}){\sim}15%(50Mg\;ha^{-1})$ by AFA at harvesting stage. In especial, soils applicated with BCFA contained a good fertility in terms of pH, available $P_2O_5$ and $SiO_2$, and exchangeable Ca and Mg etc. so that possibly harbored 3yr-residual effects of the fly ash on crop subsequent to this rice.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.15 no.4
• /
• pp.10-16
• /
• 1986

To evaluate the nutritive value, 13 Wild vegetables which commonly used for side dish were analyzed. Their Moisture are lower than that of other vegetables. Crude Protein content of thess Wild vegetables is more than 2% , which is higher than that of other vegetables and these tendencies were also shown in the content of Crude Ash. The content of Crude Fat and of Crude Fiber are similar in the Wild vegetables, but Crude Fiber of C. lanceolata TRAUTV is three times higher than that of other Wild vegetables. In all Wild vegetables, the K content of Mineral is similar, but that of C. lanceolata TRAUTV is very low. The content of Ca and P are quite different among Wild vegetables. The content of Mg is also similar each other, about 16mg%, but that of P. agwilinum var. latiusculum UNDERW, A. elata SEEM, A. altissima SWINGLE, root of A. triphylla (Thunb.)A.DC., H.Thunbergii BAK. is 8.99, 7.69, 4.30, 4.13 and 1.92mg% respectively. Total Amino acids were contained in order of A. elata; 3072.4mg%>C. lanceolata TRAUTV; 2709.4mg%>P. agwilinum var. latiusculum UNDERW, A. altissimB SWTNGLE, A. Japonica KOIDZ, S.palmata MAX. : about 2350mg%>L.Jaluensis KOM., P.Caponicus MAX., leaf of A. triphylla(Thunb.)A.DC., C.Japonicum var. ussuriense, H.plantaginea ASCHERS; about 1400mg%>H.Thunbergii BAK., A.scaber THUNB, root of A. triphylla(Thunb.) A.DC. ; about 600mg%, Asp.A.A. and Glu.A.A. content, 46% of Total A.A. is higher than other Amino acids and the content of Arg. A.A. in C.lanceolata TRAUTV which is higher than that of other Amino acids is 6 times highly than that of other Wild vegetables. A. altissima SWINGLE, H.plantaginea ASCHERS, A.Japonica KOIDZ contain Vitamin C a little avobe, 45.9mg%, 36.8mg%, 30.2mg% respectively. Glucoslde content of L.Jaluensis KOM., C.lanceolata TRAUTV which are 4.1%, 3.5%, were highest of all ana that of P.Caponicus MAX., P.agwilinum var. latiusculum UNDERW, 2.2%, 2.0% is in the second, which seems to be the cause of bitter taste.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.357-360
• /
• 1996

MgO protection layer in ac PDP(plasma display panel) prevents the dielectric layer from ion bombarding in discharge plasma. The MgO layer also has the additional important role in lowering the firing voltage due to a large secondary electron emission coefficient. Until now, the MgO protection layer is mainly prepared by E-beam evaporation. In this study, MgO protection layer is prepared on dielectric layer of ac PDP cell by reactive R.F magnetron sputtering with Mg target under various conditions of oxygen partial pressure. Discharge characteristics of PDP is also studied as a parameter of MgO preparation conditions. The sputtered MgO shows the better discharge characteristics compared with MgO deposited by E-beam evaporator.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.25 no.4
• /
• pp.31-39
• /
• 2017

From July to August 2013, liquid fertilizers produced at 180 liquid manure public resource centers and liquid fertilizer distribution centers were collected. The maturity of liquid fertilizers was measured using the mechanical maturity measurement device. The nutrient contents (nitrogen, phosphorus, and potassium), physicochemical properties, and heavy metal content of 46 liquid fertilizers were investigated in this study. We used a matured liquid fertilizer with a total number of 46, with number of 7 for Gyeonggi-do, 3 for Chungcheongbuk-do, 2 for Chungcheongnam-do, 13 for Jeollabuk-do, 5 for Jeollanam-do, 3 for Gyeongsangbuk-do, 11 for Gyeongsangnam-do, 1 for Daejeon, and 1 for Jeju-do. The physicochemical properties were as follows: pH 8.0, EC 11.6 mS/cm, SS 5,188 mg/L, TKN 847mg/L, ${{NH_4}^+}-N$ 317 mg/L, ${{NO_3}^-}-N$ 170 mg/L, Org-N 360 mg/L, TP 193 mg/L, and TK 2,557 mg/L. The total amount of NPK was 3,596 mg/L. The total amount of N-P-K was as follows: a number of 2 at 1,000-2,000 mg/L (4%), a number of 17 at 2,000-3,000mg/L (37%), a number of 11 at 3,000-4,000mg/L (24%), and a number of 16 at 4,000mg/L or more (35%). Thus, 41% of the mature liquid fertilizers were below the official standard of commercial fertilizer (livestock manure liquid fertilizer) (0.3% of the total amount of N-P-K). Most of the N-P-K total amount showed non-uniform characteristics of low nitrogen and low phosphoric acid due to the potassium concentration. The average heavy metal content in the matured liquid fertilizer was as follows: As, not detected; Cd, 0.01 mg/kg; Hg, not detected; Pb, 0.02 mg/kg; Cr, 0.14 mg/kg; Cu, 6.89 mg/kg; Ni, 0.44 mg/kg; and Zn, 20.70 mg/kg. Thus, the official standard of commercial fertilizer was satisfied in all categories, indicating a safe level.

• Journal of the Korean Vacuum Society
• /
• v.16 no.3
• /
• pp.181-186
• /
• 2007

We have investigated and analyzed the effects of the evaporation rate of MgO films on the MgO properties and the discharge characteristics of a plasma display panel(PDP). The MgO properties such as the crystal orientation, the surface roughness, the film structure, and cathode-luminescence (CL) spectra were inspected using XRD (X-ray diffraction), AFM(atomic force microscopy). And the discharging characteristics of the PDP such as the firing voltage, discharging current, and luminescence were measured using a vacuum chamber with oscilloscope (TDS 540C), current probe (TCP-312A), color meter (CS-100A) and etc. From the experiments results we confirmed the optimum evaporation rate at $5{\AA}/sec$, the MgO properties were shown to be strongly dependent on the evaporation rate, and the MgO properties had an effecton the optical and electrical characteristics. In other words, if the evaporation rates increase than $5{\AA}/sec$, the intensity of (200) orientation and cathode-luminescence (CL) spectra reduce, and the firing vlotage was increased. So the luminuous efficiency grows worse.