• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.366-366
• /
• 2010

Single crystalline Fe/NiO bilayers were epitaxially grown on Ag(001) and on MgO(001), and investigated by Low Energy Electron Diffraction (LEED), Magneto-Optic Kerr Effect (MOKE), and X-ray Magnetic Linear Dichorism (XMLD). We find that while the Fe film has an in-plane magnetization in both Fe/NiO/Ag(001) and Fe/NiO/MgO(001) systems, the NiO spins switch from out-of-plane direction in Fe/NiO/MgO(001) to in-plane direction in Fe/NiO/Ag(001). These two different NiO spin orientations generate remarkable different effects that the NiO induced magnetic anisotropy in the Fe film is much greater in Fe/NiO/Ag(001) than in Fe/NiO/MgO(001). XMLD measurement shows that the much greater magnetic anisotropy in Fe/NiO/Ag(001) is due to a 90o-coupling between the in-plane NiO spins and the in-plane Fe spins which causes a switching of the NiO spins during the Fe magnetization reversal.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.304-304
• /
• 2011

We investigated the effect of different spin direction of anti-ferromagnetic layer on the magnetic properties of ferromagnetic layer in Fe-NiO and Fe-CoO bi-layer systems. For Fe-NiO system, we prepared the clean MgO(001) surface half-covered with 20 nm Ag films as a substrate for magnetic layers. Then we grew NiO wedge layers on the substrate, and added 8 monolayer(ML) Fe layers on the wedge layer. We examined magnetic properties of the bi-layer system using the surface magnetic optical Kerr effect(SMOKE) and X-ray magnetic linear dichroism(XMLD). From SMOKE measurement we observed the coercivity enhancement due to the set-up of anti-ferromagnetic order of NiO films in both of the Fe/NiO/MgO(001) and Fe/NiO/Ag/MgO(001) system. The most remarkable results in our observation is that the coercivity enhancement of Fe/NiO/Ag/MgO(001) is much larger than that of Fe/NiO/MgO(001). XMLD experiments confirmed the out-of-plane spin direction of NiO layers in Fe/NiO/MgO(001) and in-plane spin-direction of NiO layers in Fe/NiO/Ag/MgO(001), and we concluded that the origin of large enhancement of coercivity is due to the strong parallel coupling between Fe layers and NiO layers. We also confirmed that this strong parallel coupling maintained across the thin Ag layer inserted between Fe and NiO layers. For Fe-CoO system, we prepared Fe/CoO/Ag(001) and Fe/CoO/MnO(001) systems and observed much larger coercivity enhancement in Fe/CoO/Ag(001).

• Transactions on Electrical and Electronic Materials
• /
• v.1 no.2
• /
• pp.32-37
• /
• 2000

Effect of alloying element additions to Ag on thermal conductivity and electrical conductivity of sheath materials for Bi-Pb-Sr-Ca-Cu-O(BSCCO) tapes has been characterized. The thermal conductivity at low temperature range (10~300K) of Ag and Ag alloys were evaluated by both direct and indirect measurement techniqueas and compared with each other, It was observed that the thermal conductivity decreases with increasing the content of alloying element such as Au, Pd and Mg. Thermal conductivity of pure Ag at 3 0K was measured to be 994.0 W(m.K) on the other hand, the corresponding values of $Ag_{0.9995}Mg_{0.0005}$, $Ag_{0.974}$, $Au_{0.025}$, $Mg_{0.001}$, $Ab_{0.973}$, $Au_{0.025}$, $Mg_{0.002}$ and $Ag_{0.92}$, $Pb_{0.06}$, $Mg_{0.02}$ were 342.6, 62.1, 59.2 and 28.9 W(m.K), respectively, indicating 3 to 30 times lower than that of pure Ag. In addition, the thermal conductivity of pure Ag measured by direct and indirect measurement techniques was 303.2 and 363.8 W(m.K) The difference in this study is considered to be within an acceptable error range compared to the reference data.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.1
• /
• pp.71-74
• /
• 2022

For the process simplification in the fabrication of organic light emitting diode(OLED), top emission OLED (TEOLED) was fabricated without lithium fluoride(LiF) used as an electron injection layer (EIL). After co-deposition of Mg and Ag with a different process conditions, a cathode material adjacent to EIL was optimized when Mg and Ag have a ratio of 1:9 considering sheet resistance and transmittance. From the energy band diagram of TEOLED, band gap difference between Trisaluminium (Alq3) and Mg:Ag cathode show the difference of 0.4 eV according to the usage of LiF The fabricated TEOLED without LiF showed the improvement of 5.2 % and 2.7 % in the luminance and the current density comparing that with LiF. The results show there is no significant difference in OLED characteristics regardless of LIF layer in the TEOLED structures.

• Journal of Plant Biotechnology
• /
• v.36 no.1
• /
• pp.18-22
• /
• 2009

This work was conducted to establish an efficient plant regeneration system for genetic transformation and the in vitro conservation of Sedum sarmentosum genetic resources. Effects of glutamine and $AgNO_3$ on plant regeneration between two genotypes were investigated using MS media supplemented with 0.2 mg/L NM and 3.0 mg/L BA. Calluses were formed on leaf explants placed on MS solid media supplemented with 3 mg/L 2,4-D and 1 mg/L BA. Calluses of Keumsan local strain produced shoots at a frequency of up to 100% after 50 days of culture on medium supplemented with glutamine. The highest number of shoots per callus was 17.6 at 350 mg/L glutamine. However, calluses of Wanju local strain gave rise to no shoots under the same culture conditions. Likewise, calluses of Keumsan local strain produced shoots at a frequency of up to 100% after 50 days of culture on medium supplemented with $AgNO_3$ whereas Wanju local strain sporadically produced shoots. The highest number of shoots per callus of Keumsan local stain was 16.1 at $15{\mu}M$ $AgNO_3$. Regenerated shoots were subcultured on hormone-free MS medium for rooting and shoot growth, and then 3-5 cm high plantlets were transplanted to the artificial soils comprising vermiculite and perlite, where they survived at a frequency of 88-100%. After being transplanted into upland soil:sand (1:1, v/v) in a greenhouse, regenerated plants showed a morphologically normal growth.

• Journal of Acupuncture Research
• /
• v.35 no.1
• /
• pp.21-27
• /
• 2018

Background: Examination of the effects of deer antler, old antler, and antler glue on postmenopausal osteoporosis in an ovariectomized Sprague-Dawley rat model. Methods: The study involved 7 experimental groups; SHAM (sham-operated rats), OVX (ovariectomized rats), E2 (ovariectomized rats with estradiol $10{\mu}g/kg$ daily, orally), DA (ovariectomized rats with deer antler extract 5.83 mg/kg), OA (ovariectomized rats with old antler extract 3.8 mg/kg), low-AG (ovariectomized rats with low dose of antler glue powder 12.5 mg/kg), high-AG (ovariectomized rats with high dose of antler glue powder 37.5 mg/kg). After 6 weeks of treatment, body weight, blood calcium, phosphorus, estradiol, liver [alkaline phosphatase (ALP), aspartate transaminase (AST), alanine transaminase (ALT)] and kidney [blood urea nitrogen (BUN)/creatinine ratio] function, and femoral bone mineral density (BMD) were measured. Results: The body weights of DA, OA, low-AG, and high-AG groups did not significantly differ from OVX group. Blood estradiol levels were significantly increased in the DA, low-AG, and high-AG groups compared to the OVX group. Blood calcium, phosphorus, ALP, AST, and ALT levels and BUN/creatinine ratio did not show significant changes in the DA, OA, low-AG, and high-AG groups. BMDs of the femur, and femoral head and neck were significantly increased in the low-AG group. In the OA group, the BMD of the femoral head and neck was significantly increased. Conclusion: Treatment with deer antler, or antler glue for 6 weeks was effective for increasing estradiol and femoral BMD in ovariectomized rats, suggesting that this may be of therapeutic benefit for osteoporosis.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.231-231
• /
• 2013

ZnO은 hexagonal wurtzite 구조를 갖는 직접 천이형 화합물 반도체로서, 상온에서 3.37 eV 정도의 wide band gap energy를 가지고 있으며, 60 meV의 큰 엑시톤 결합 에너지(exciton binding energy)를 갖는다. 또한 동종 기판이 존재하고 열, 화학적으로 안정한 상태이며 습식 식각이 가능한 장점으로 인해 각광받고 있다. 또한, ZnO 박막은 우수한 전기 전도성을 나타내며 광학적 투명도가 우수하기 때문에 투명전극으로 많이 이용되어 왔고, 태양 전지(solar cell), 가스 센서, 압전소자 등 많은 분야에서 사용되고 있다. 이와 같은 ZnO박막을 안정적인 쇼트키 다이오드 특성을 얻기 위해서는 쇼트키 배리어 장벽의 형성이 필수적이다. Mg을 ZnO에 첨가하여 MgZnO 박막을 형성할 경우, 금속의 일함수와 MgZnO의 전자친화력 차이가 증가하여 더 큰 쇼트키 장벽 형성이 가능하며, 금속의 일함수가 큰 물질을 사용해야 한다. 또한, 박막의 결함이 적은 박막을 형성해야 하는 에피탁셜 박막이 필요하다. SiC는 높은 포화 전자 드리프트 속도(${\sim}2.7{\times}107$ cm/s), 높은 절연 파괴전압(~3 MV/cm)과 높은 열전도율(~5.0W/cm) 특징을 가지고 있으며, MgZnO/Al2O3의 격자 불일치는 ~19%인 반면에 MgZnO/SiC의 격자 불일치는 ~6%를 가진다. 금속의 일함수가 큰 Ag 금속은 열처리가 될 경우 AgOx가 될 경우 더욱 안정적인 쇼트키 장벽을 형성될 수 있을 것으로 판단된다. 본 연구에서는 쇼트키 접합을 형성하기 위해 금속의 일함수가 큰 Ag 금속을 사용하였으며, Al2O3 기판과 6H-SiC 기판위에 MgZnO(30 at.%) 박막을 증착하였다. 증착 후에 Ag를 증착 한 뒤 급속 열처리를 하였다. 열처리된 MgZnO의 경우 열처리 하지않은 소자보다 약 $10^5$ 이상의 우수한 on/off 특성을 보였다.

• Journal of Korea Foundry Society
• /
• v.19 no.6
• /
• pp.456-465
• /
• 1999

The overall objective of this study is to investigate the effect of Ag addition on the mechanical properties and microstructure of rapid solidified 7000 Al series alloys. Al-Zn-Mg-Cu alloys with small amounts of Ag was fabricated into the powder by gas atomization. The powder was extruded after the cold compaction and degassing and then followed by T6 heat treatment. Microstructure observation, phase analysis, room and high temperature tensile test and hardness test were pursued. The tensile strength and hardness of Ag-added alloy after heat treatment was increased with increasing Ag contents. However, the elongation of extruded alloys was not increased as much as to be expected. The reason of this result seems to be related to $the{\Omega}$ phase, which contribute to the high temperature strength stability of Al-Cu-Zn alloys through the formation of eutectoid with Ag addition.

• 한국초전도학회:학술대회논문집
• /
• 2009.07a
• /
• pp.42-42
• /
• 2009

• Journal of Sensor Science and Technology
• /
• v.8 no.2
• /
• pp.177-183
• /
• 1999

A Polymer material, PU-BCN and a low molar mass material D-BCN with the same chromophore were evaluated by fabricating various electroluminescent(EL) devices. A molecular structure of the chromophore was composed as two cyano groups for electron-injection and transport and two triphenylamine groups for hole-injection and transport. Various kinds of EL devices with two different types of EL materials, PU-BCN and D-BCN were fabricated, which were an Indium-tin oxide(ITO)/PU-BCN or D-BCN/MgAg device as a single-layer device(SL) and an ITO/PU-BCN or D-BCN/oxadiazole ferivative/MgAg as a double-layer device(DL-E) and an ITO/triphenylamine derivative/D-BCN/MgAg as a double-layer device(DL-H) device. Two kinds of materials, PU-BCN and D-BCN showed the same emission characteristics in the high current density and excellent EL characteristics even in the SL devices. Maximum EL peaks revealed red emission of about 640 nm, which were corresponded with the fluorescence peaks of the films of two materials.