• 제목/요약/키워드: Methyl isobutyl ketone(MIBK)

검색결과 17건 처리시간 0.021초

Pseudomonas putida KT-3의 Methyl Ethyl Ketone 및 Methyl Isobuthyl Ketone 분해 특성 (Degradation Characteristics of Methyl Ethyl Ketone and Methyl Isobuthyl Ketone by Pseudomonas putida KT-3.)

  • 김민주;이태호;이경미;류희욱;조경숙
    • 한국미생물·생명공학회지
    • /
    • 제30권4호
    • /
    • pp.395-401
    • /
    • 2002
  • 각종 산업시설에서 유기용제로 사용되는 methyl ethylketone(MEK)과 methyl isobutyl ketone(MIBK)을 유일 탄소원으로 이용할 수 있는 Pseudomonas putida KT-3 균주에 의한 이들 물질의 생분해 특성을 조사하였고, MEK/MIBK 혼합물 분해에 미치는 이들 기질 상호간의 작용을 규명하였다. MEK 단독 기질 조건에서 MEK 첨가농도가 0.5에서 5.5mM로 증가함에 따라 KT-3 균주에 의한 MEK 분해속도도 3.15에서 10.58 mmol/g DCW$\cdot$h로, MEK 첨가량이 5.5mM인 경우와 거의 유사한 속도를 얻을 수 있었다. 또한 MIBK 단독 기질 조건에서 KT-3 균주에 의한 MIBK 분해속도는 3.0mM 이상의 MIBK 농도에서는 MIBK 농도에 상관없이 4.69-4.96 mmol/gDCW$\cdot$h로 거의 일정하였다. KT-3 균주의 MEK/MIBK 혼합물에서의 생분해 속도의 감소는 두 기질 상호간의 경쟁적인 저해작용에 의한 것임을 알 수있었고, 속도론적 해석 결과 얻는 MEK와 MIBK의 최대분해속도 ($V_{max}$), 포화상수 ($K_{m}$) 및 저해상수 ($K_{1}$)는 다음과 같다. $V_{max,MEK}$=12.94 mmol/g DCW$\cdot$h; $K_{m,MEK}$=1.72 mmol/L; $K_{l,MEK}$=1.30 mmol/L; $V_{max,MIBK}$=5.00 mmol/g-DCW$\cdot$h; $K_{m,MIBK}$=0.42 mmol/L; $K_{l,MEK}$=0.77 mmol/L.

원자흡수 분광법에 의한 철광석중의 Mn, Co, Ni 및 Cu 의 정량. APDC-MIBK 추출계의 이용 (Determination of Mn, Co, Ni and Cu in Iron Oxide Ore by Atomic Absorption spectroscopy. Utilization of APDC-MIBK Extraction System)

  • 박미선;김연두;고광희
    • 대한화학회지
    • /
    • 제33권3호
    • /
    • pp.315-320
    • /
    • 1989
  • 철광석 중에 존재하는 미량 금속원소들을 분석하는 방법을 제시하였다. 분석방법은 ammonium pyrrolidinedithiocarbamate(APDC)-methyl isobutyl ketone(MIBK) 추출계와 원자흡수 분광법(AA)를 이용하였다. 철이 유기층으로 추출되는 것을 막기 위하여 가리움제로서 코발트, 니켈 및 구리의 분석시에는 pH $8{\sim}10$에서 citrate를, 그리고 망간 및 구리의 분석시에는 pH 6{\sim}7$에서 tiron을 가하였다. MIBK의 물에 대한 용해도를 줄이기 위해 NaCl을 염석제로 가하였다. 금속 추출용액의 안정도를 증가시키기 위한 방안으로 MIBK 금속 추출물을 질산 수용액으로 역추출하는 것을 검토하였다.

  • PDF

알루미나/지르코니아 테이프 케스팅 슬러리의 분산과 레올로지에 미치는 용매혼합의 영향 (Effects of Solvent Mixtures on Dispersion and Rheology of Alumina/zirconia Tape Casting Slurries)

  • 김지현;양태영;이윤복;윤석영;박흥채
    • 한국재료학회지
    • /
    • 제11권6호
    • /
    • pp.519-526
    • /
    • 2001
  • Al$_2$O$_3$/ZrO$_2$ 비수성 현탁액의 분산과 레올로지에 미치는 methyl isobutyl ketone (MIBK) /ethanol (EtOH) 용매혼합의 영향을 침전밀도, 점도를 측정함으로써 조사하였다. 분산제 'Hypermer' KD-1이 첨가된 다량의 MIBK를 함유하는 용매 ($\geq$60vol%)에서 $Al_2$O$_3$와 ZrO$_2$ 입자의 침전밀도는 증가하였다. 80MIBK/20EtOH(vol%)에서 ball milling한 현탁액이 좁고 unimodal한 입자크기분포를 나타내었다. 모든 현탁액은 의가소성유동을 나타내었으나 shear thinning은 $Al_2$O$_3$/ZrO$_2$의 혼합비, MIBK/EtOH의 혼합비에 따라서 다소 다르게 거동하였다. 순수한 MIBK를 사용한 $Al_2$O$_3$(<300 s$^{-1}$ ) 및 ZrO$_2$(<3000 s$^{-1}$ ) 현탁액은 주어진 전단속도범위내에서 가장 강한 shear thinning을 나타내었다. 동일한 용매 (80MIBK/20EtOH, vol%)를 사용한 경우의 shear thinning은 $Al_2$O$_3$/ZrO$_2$의 혼합비에 거의 의존하지 않았다.

  • PDF

Tri-n-butyl phosphate와 액상고분자 지지액막을 이용한 페놀의 분리 (Supported Liquid Membrane Composed of Tri-n-butyl Phosphate or Liquid Polymer for Phenol Separation)

  • 안효성;이용택;윤인주;김명수
    • 멤브레인
    • /
    • 제8권4호
    • /
    • pp.228-234
    • /
    • 1998
  • 다양한 수질 오염원 중 페놀과 같은 유기화합물은 배출조건이 비정상적인 경우 기존의 처리방법으로 제거하거나 파괴하기 어렵다. 수용액으로부터 페놀을 분리하기 위한 최근의 연구들은 활성탄에 의한 흡착, 용매 추출 등에 의해 수행되어져 왔으며, 물-기름 유화에 기초를 둔 액막법이 기존의 기술들을 대체하기 위한 방법으로 시험되어져 왔다. 본 연구에서는 tri-n-butyl phosphate(TBP)와 액상 고분자를 지지액막의 액막용액으로 선정하여 수용액상의 페놀을 분리하였다. 공급측 페놀 농도를 변화시키고 다양한 액막용액을 사용하여 이들이 페놀분리에 미치는 효과를 연구하였다. TBP를 운반체로 사용한 경우의 실험결과들은 용매추출에서 주로 사용되고 있는 methyl isobutyl ketone(MIBK)보다 높은 물질전달속도를 보여주었으며, 선택한 액상고분자 중 polypropylene glycol 4000(PPG-4000), polybutylene glycol 500(PBG 500)의 경우 MIBK와 유사하거나 조금 높은 값을 나타내었다.

  • PDF

Acrylic Acid의 반응추출에 미치는 용매의 영향 (Effect of Solvents on Reactive Extraction of Acrylic Acid)

  • 이상훈;신정호
    • 한국환경과학회지
    • /
    • 제7권6호
    • /
    • pp.753-759
    • /
    • 1998
  • In physical and reactive extraction of acrylic acid using various solvents the equilibrium characteristics of extraction were investigated. The degree of extraction in reactive extraction with Tri-n-octylamine(TOA) was 1.5~3 times than that in physical extraction. Distribution ratio was constant in methyl isobutyl ketone(MIBK) and n-butylacetate(n-BAc) but was increased with increasing the concentration of acrylic acid in benzene and chloroform. It can be explained by formation of dimers. Maximum extraction leadings of acrylic acid were three in benzene and were two in MIBK, chloroform and n-BAc, and it was found that acrylic acid was extracted as the form of $A_3$R In benzene and $A_2R$ in MIBK, chloroform and n-BAc. In effect of solvent, the degree of extraction was increased as he difference of solubility parameter of solvent and solute was decreased, and as dielectric constant of solvent was increased.

  • PDF

Lab sacle의 섬유상담체를 이용한 VOCs 제거

  • 장정균;최환석;박주영;차진명;오민하;박돈희
    • 한국생물공학회:학술대회논문집
    • /
    • 한국생물공학회 2001년도 추계학술발표대회
    • /
    • pp.552-555
    • /
    • 2001
  • 본 연구는 MEK, MIBK와 BTX 혼합물을 미생물 컨소시엄을 통하여 biofilter를 이용한 이 들 화합물에 대한 제거율을 파악해 봄으로써, 추후에 pilot plant scale을 설계하는 기본 변수로 활용하고자 한다. 미생물의 적응기간인 초기 2일까지의 제거효율은 변화의 폭이 다소 적었으나 3일 이후부터 급상승하여 4일 이후부터 높은 제거효율을 나타내었다. 또한, 혼합 VOCs의 유입 농도에 변화를 주어 이에 대한 biofilter의 운진시간에 따른 제거율의 변화에 있어서도 VOCs 유입에 대하여 초기에는 낮은 처리효율을 보여주었으나 1일이 경과한 후 높은 제거효율을 보였다. 본 연구에서는 처리할 VOCs 물질의 유입 농도 변화에 상관없이 높은 처리효율을 나타냈다 이는 biofilter 에 처음으로 적용한 섬유상 담체의 표면에 운전기간동안 미생물들이 지속적으로 부착되어 유입되는 VOCs 물질에 대한 적응기간을 단축시킬 수 있었던 것으로 사료된다.

  • PDF

초음파 분무기를 이용한 유기상의 주입에 의한 희토류 원소의 유도결합 플라스마 질량분석법적 정량 (Determination of Rare Earth Elements by Inductively Coupled Plasma Mass Spectrometry with Introduction of Organic Phase Using Ultrasonic Nebulizer)

  • 이상학;손범목
    • 분석과학
    • /
    • 제15권2호
    • /
    • pp.127-134
    • /
    • 2002
  • 추출한 유기상 속의 희토류 원소를 유도결합 플라스마 질량분석법(inductively coupled plasma mass spectrometry, ICP-MS)으로 정량하는 방법에 대하여 연구하였다. 희토류 원소를 추출한 유기상의 과다한 도입을 방지하기 위하여 탈용매화장치를 장착한 초음파 분무기를 이용하여 ICP-MS에 주입하였다. 에탄올(EtOH)에 MIBK(methyl isobutyl ketone)를 섞은 용매를 도입하였을때, 계수율(count rate)이 증가하였고, 여기에 0.03 M의 추출제 HEH(2-ethylhexyl-2-ethylhexyl phosphonic acid, P507, PC88A)를 섞었을 때는 감소하였다. 탈용매화장치의 냉각장치(condenser)의 최적온도는 -10 $^{\circ}C$이었고, 가열관(heating tube)의 최적온도는 150 $^{\circ}C$이었다. 계수율이 최대이고, 반사파(reflect power)가 최소인 최적 운반기체의 흐름속도는 0.7 L/min이었다. MIBK에 추출제 HEH가 0.03 M이 섞여있는 추출용매로 추출을 행하였을 때, 최적 pH는 4.3이었고, 추출시간은 10 분이었다. 최적조건에서 0.2 ${\sim}$ 20 ng/mL의 표준용액으로 얻은 검정곡선으로부터 구한 검출 한계는 0.02 ${\sim}$ 0.05 ng/mL 이었다.

2008년과 2010년 지정 VOC 계열 신규악취성분들에 대한 분포특성 조사: 도심 하수환경 중 빗물받이에 대한 연구 (Measurements of Volatile Organics, Newly Designated Offensive Odorants in Korea in 2008 and 2010: a Case Study on Gutter System)

  • 안지원;홍원필;이은희;김기현
    • 한국대기환경학회지
    • /
    • 제26권3호
    • /
    • pp.305-317
    • /
    • 2010
  • In this research, a total of 11 newly designated offensive odorants in Korea in 2008 and 2010 (styrene (S), toluene (T), p-xylene (p-X), methyl ethyl ketone (MEK), methyl isobutyl ketone (MIBK), butyl acetate (BuAc), isobutyl alcohol (i-BuAl), propionic acid (PA), butyric acid (BA), isovaleric acid (IA), and valeric acid (VA)) were selected as target compounds and analyzed from two types of gutter system in the urban environment. Because of the environmental significance of these compounds as offensive odorants, the results are meaningful enough to explore their behavior and distribution in the urban environmental systems. In the course of this study, samples were collected three times a day from two different gutter systems representing the wet (W) and dry (D) conditions. A large fraction of volatile organic compounds (VOCs) data fell into method detection limit (MDL) range with exceptions of toluene, p-xylene, and methyl ethyl ketone. In contrast, the results of organic fatty acids were distinguished by the relative dominance of butyric acid and propionic acid over others. If the concentration data of all odorants were converted into odor intensity (OI), the results of aromatics, ketones, acetate, and alcohol groups approached zero level. However, odor intensity of organic fatty acids was noticeably higher with the value of 2.8 (on average) from both W and D system, suggesting their potent roles as odorants in gutter system.

Extraction Equilibria and Solvent Sublation for Determination of Ultra Trace Bi(Ⅲ), In(Ⅲ) and TI(Ⅲ) in Water Samples by Ion-Pairs of Metal-2-Naphthoate Complexes and Tetrabutylammonium Ion

  • Kim, Young-Sang;Choi, Yoon-seok;Lee, Won
    • Bulletin of the Korean Chemical Society
    • /
    • 제23권10호
    • /
    • pp.1381-1391
    • /
    • 2002
  • The solvent sublation using ion pairs of metal-2-naphthoate(2-HNph) and tetrabutyl ammonium ($TBA^+$) ion has been studied for the concentration and determination of ultra trace Bi(III), In(III) and Tl(Ⅲ) ions in water samples. The partition coefficients ($K_p$) and the extraction percentages of 2-HNph and the ion pairs to methyl isobutyl ketone (MIBK) were obtained as basic data. After the ion pair $TBA^+$·M$(Nph)_4^-$ was formed in water samples, the analytes were concentrated by the solvent sublation and the elements were determined by GF-AAS. The pH of the sample solution, the amount of the ligand and counter ion added and stirring time were optimized for the efficient formation of the ion pair. The type and amount of optimum surfactant, bubbling time with nitrogen and the type of solvent were investigated for the solvent sublation as well. 10.0 mL of 0.1 M 2-HNph and 2.0 mL of 0.1 M $TBA^+$ were added to a 1.0 L sample solution at pH 5.0. After 2.0 mL of 0.2%(w/v) Triton X-100 was added, the ion pairs were extracted into 20.0 mL MIBK in a flotation cell by bubbling. The analytes were determined by a calibration curve method with measured absorbances in MIBK, and the recovery was 80-120%.

바이오필터의 휘발성유기화합물 제거특성 및 탄소물질수지를 이용한 생물반응의 양론적 해석 (Removal Characteristics of Volatile Organic Compounds in Biofilters and Stoichiometric Analysis of Biological Reaction by Carbon Mass Balance)

  • 김대근
    • 대한환경공학회지
    • /
    • 제32권8호
    • /
    • pp.747-753
    • /
    • 2010
  • 본 연구는 바이오필터의 기질분해특성을 파악하기 위하여 휘발성유기화합물을 대상으로 임계부하량과 기질특성의 상관관계를 분석하였고, 탄소물질수지를 이용한 생물반응의 양론적 해석을 수행하였다. 반응기에 공급된 기질은 단일물질이며, toluene, styrene, MEK, MIBK를 선정하였다. 바이오필터의 기질임계부하량은 toluene은 $46.9\;g/m^3{\cdot}hr$, styrene은 $25.8\;g/m^3{\cdot}hr$, MEK는 $96.3\;g/m^3{\cdot}hr$, MIBK는 $66.5\;g/m^3{\cdot}hr$이었으며, 임계부하량은 옥탄올-물 분배계수(KOW)와 높은 상관관계를 보였다. 또한 기질부하량이 증가할수록 물질수지 중 $CO_2$에 의한 탄소회수율은 낮아졌고, 바이오매스에 의한 탄소회수율은 높아지는 경향을 보였다. 생물양론적 해석을 통하여 추정된 biomass yield (g biomass/g substrate)는 기질부하량이 증가할수록 커졌으며, toluene은 0.31~0.57, styrene은 0.29~0.57, MEK는 0.08~0.56, MIBK는 0.14~0.53의 변화폭을 보였다.