• Applied Biological Chemistry
• /
• v.46 no.3
• /
• pp.207-213
• /
• 2003

Kochujang was prepared for this study with raw material inoculated by commercial enzyme of amylase and protease. Volati1e compounds of Kochujang were analyzed using a purge and trap method during fermentation and identified with GC-MSD. Total 54 kinds of volatile flavor components like 16 kinds of alcohol, 16 kinds of ester, 7 kinds of acid, 4 kinds of aldehyde, 2 kinds of alkane, 1 kind of benzene, 3 kinds of ketone, 1 kind of alkene, 2 kind of amine, 1 kind of phenol, other 1 were found. Total number of volatile flavor detected right after manufacturing were 23 kinds like 3 kinds of alcohol, 6 kinds of ester, 3 kinds of aldehyde. After 30 days storage, total number of volatile flavor went up to 31 kinds with addition of 4 kinds of alcohol, 1 kind of ester. The total number of volatile flavor after 120 days storage were increased to 49 kinds. Volatile flavor compounds detected during the storage period were total 20 kinds like 6 kinds of alcohol such as 2-methyl-1-propanol, ethanol, 3-methyl-1-butanol, 5 kinds of ester such as ethyl acetate, isoamyl acetate, ethyl butyrate, 3 kinds of aldehyde such as butanal, acetaldehyde and 6 kinds of others. Even though peak area % of flavor compound varied depends on fermentation period, ethanol, ethyl acetate, ethyl butyrate, ethenone, 2-methyl-1-propanol, 3-methyl-1-butanol were the main compounds that consisted of flavor from Kochujang which was made with enzyme treatment. Ethly acetate showed the highest result in the treatment of right after manufacturing, 3-methyl-1-butanol had up to 90th day and ether were the other days.

• Journal of Environmental Health Sciences
• /
• v.2 no.1
• /
• pp.5-9
• /
• 1975

For analysis of Xanthene dyes according to the developing solvent and adsorbent was applied to Thin-layer chromatography with silicagel and cellulose plate. Silicagel chromato-plate used were prepared under different condition of activation. Using eight developing solvent, the influence of the condition for activation upon the separation of Xanthene dyes was investigated. The results are shown in Table 3. Methyl ethyl ketone+Acetone+$H_2O$ (10:0.1:0.4) mixture and n-butanol+Ammonia water (4:1) mixture gave clear separation for Xanthene dyes, including Fluorescein, Erythrosine Rhodamin B, Eosine, Rose bengale, phloxine and Acid red those Rf values decrease in the described ordor. Methyl ethyl ketone+Acetone+$H_2O$ (10:0.1:0.4) was applied to two adsorbents which were purchased from different manufactures. The results of Chromatograms are obtained Figure 6.

• Nuclear Engineering and Technology
• /
• v.4 no.4
• /
• pp.327-330
• /
• 1972

$^{99m}$Tc Ferric Hydroxide Macroaggregates for Lung Perfusion Studies were prepared from home made Na $^{99m}$TcO$_4$ which was extracted by methyl ethyl ketone from low activity $^{99m}$Mo. Particle size was in between 20 and 60$\mu$. Rabbit and human body tests gave excellent results.sults.

• Journal of the Korean Chemical Society
• /
• v.38 no.1
• /
• pp.80-86
• /
• 1994

The synthetic pathway of ethyl $({\pm})$-8-oxo-10-oxa-l'H-spiro[1, 3]dioxolane-4,4'-tricyclo [9.2.1.0 1,6]dodec-6-ene-9-carboxylate (7), an important intermediate for the total synthesis of bruceantin analogue, was developed. Ethyl 2-cyclohexanonecarboxylate and methyl vinyl ketone were employed as starting materials. Robinson annulation, allylic oxidation, regiospecific acylation and the formation of epoxy methano bridge ring were studied. 4,4a,5,6,7,8-Hexahydro-4a-hydroxy-2(3H)naphthalenone (14) was synthesized utilizing the unusual decarboethoxylation reaction discovered during ketalization of octalone (3).

• Journal of Food Hygiene and Safety
• /
• v.14 no.1
• /
• pp.76-83
• /
• 1999

Solid phase microextraction (SPME) was used for the determination of 6 standard solvents (methanol, isopropanol, methyl ethyl ketone, ethyl acetate, cyclohexane, toluene) in food packaging materials. SPME method is a solvent-free sample preparation technique in which a fused silica fiber coated with polymeric organic liquid is introduced into the headspace above the sample. SPME method using fiber coated polydimethylisiloxane (PDMS) was compared with static headspace (SHS) method used as a reference. It was found that the optimal adsorption condition using PDMS-SPME method was 2$0^{\circ}C$ for 15 minutes for the standard solvents. Detection limits, linearity, reproducibility and recovery of both SHS and PDMS-SPME methods have been determined using 6 standard solvents. Both methods were characterized by high reproducibility and good linearity. Using SHS methods, the mean recovery of the 6 standard solvents was ranged from 75.5% to 105.8% with a mean relative standard deviation (RSD) of 0.3% to 4.8%. With PDMS-SPME method, the mean recovery of the 6 standard solvents was ranged from 86.7% to 108.3% with a mean RSD of 0.4% to 2.5%. The detection limits of both methods were the same for toluene, cyclohexane and methyl ethyl ketone; those of PDMS-SPME method were higher than those of SHS method for methanol, isopropanol and ethyl acetate. PDMS-SPME fiber shoed excellent adsorption for non-polar solvents such as toluene, while it showed relatively low adsorption for polar solvents such as methanol.

• Archives of Pharmacal Research
• /
• v.17 no.4
• /
• pp.281-283
• /
• 1994

5-sec-butylthiomethyl-5-alkyl (methyl or phenyl) hydantoins (3-x) were prepared by the reaction of sec-buylthiomethyl alkyl (methyl or phenyl) ketone (1-2), potassium cyanide and ammonium carbonate. 3-(2-Bromoethyl) hydantoins (5-6) were the reaction products of 5-sec-buythiomethyl-5-alkyl (methyl or phenyl) hydantoin and 1, 2-dibromothane in the presence of potassium hydroxide. Alkylation of 5 and 6 with an excess of alkyl (methyl or ethyl iodide in THF with sodium hydride as base gave three 1-alkyl (methyl or ethyl)-3-(2-bromoethyl) hydantoins (7-9). Treatment of the 2-bromothyl group with potassium thioacelate and triethylamine gave three 1-alkyl (methyl or ethyl)-3-92-acetylthioethyl) hydantoins (10-12). Hydrolysis of the 2-acetylthiuoethyl group with sodium hydroxide in methanol afforded the three 1-alkyl (methyl or ethyl)-3-(2-mercaptorthyl) hydantoins.

• Korean Chemical Engineering Research
• /
• v.43 no.5
• /
• pp.637-640
• /
• 2005

The density of polar-nonpolar liquid mixtures composed of methyl tert-butyl ether(MTBE) and 2,2,4-trimethylpentane, and methyl ethyl ketone (MEK) and 2,2,4-trimethylpentane, and the density of polar-polar liquid mixture of MTBE and MEK were measured by densitometer at 278.15 K, 288.15 K and 298.15 K, respectively. The excess molar volume of the binary systems calculated from the measured density was shown good agreement with the calculated one by the cubic Peng-Robinson- Stryjek-Vera (PRSV) equation of state together with Huron-Vidal mixing rule and it confirmed that the cubic PRSV equation of state could be used in the molar volume calculation of polar mixture.

• Archives of Pharmacal Research
• /
• v.12 no.1
• /
• pp.17-21
• /
• 1989

We have reported earlier on the reactivity of 7-dithiocarboxy-3-phenyl-5,6-dihydro imidazo[2,1-b]thiazolium-betaine with several para-substituted phenacyl bromides. In this work reactions of 7-dithiocarboxy-3-phenyl(or methyl)-5,6-dihydro imidazo[2,1-b]thiazolium-betaine with a series of aliphatic alkylating agents of ${\alpha}$ -halo ketone,${\gamma}$-halo koto ester and ${\alpha}$ -halo ester were examined for the similar purpose. In case of ${\alpha}$-halo ketone or ${\gamma}$-halo koto ester such as ${\alpha}$ -chloro acetone or ethyl 4-chloro acetoacetate new biheterocyclic compound was obtained via ring transformation reaction. However, reaction of the betaine with methyl(or ethyl) bromoacetate used as a ${\alpha}$-halo ester, gave, in-stead, S-alkylated quarternary ammonium salt.

• Journal of Environmental Health Sciences
• /
• v.45 no.5
• /
• pp.474-486
• /
• 2019

Objectives: This study was performed to investigate the emission characteristics of aldehydes emitted by the printing industry and to evaluate their impact on adjacent residential areas. Methods: Aldehydes and THC were measured from the front of the control device in the printing and coating process. Aldehydes and ketones were measured by workplace area, residential area, and background area to evaluate their impact. Results: The concentrations of formaldehyde (<0.047 ppm) and acetaldehyde (<0.068 ppm) in the printing and coating process were relatively low, and the methyl ethyl ketone used as the primary solvent was the main carbonyl compound in the printing process. The daily mean concentrations of formaldehyde and acetaldehyde were not significantly different by workplace area, residential area, or background area. However, the concentration of methyl ethyl ketone was high in the order of workplace area, residential area, and background area. Conclusions: The concentrations of formaldehyde and acetaldehyde in the adjacent residential areas are considered to be more influenced by secondary sources of photochemical reactions than by primary sources. Methyl ethyl ketone is considered to be highly influenced by the primary source, which is printing facilities.

• Korean Chemical Engineering Research
• /
• v.43 no.5
• /
• pp.579-587
• /
• 2005

Phase separations of Poly(4-vinylphenol)(PVPh)/acetone and PVPh/methyl ethyl ketone solutions were measured using the thermal optical analysis (TOA) method. The phase separations of these system showed the behaviors of LCST-type (lower critical solution temperature). The measured cloud temperatures were lowered with increasing molecular weight of PVPh, and cloud temperatures of PVPh/MEK solutions shifted to higher temperature regions, compared to the PVPh/acetone solutions. Phase equilibria of PVPh/ketone solutions were described with taking account of self-associations of PVPh and cross-associations between PVPh and solvent, by using the PC-SAFT equation of state. PC-SAFT EoS parameters of PVPh and cross-association parameters were determined by simultaneously fitting liquid density data of PVPh and VLE data of the PVPh/acetone system. The estimated parameters of PVPh and cross-association parameters were utilized to calculations of the binodal and spinodal curves, and the calculated binodal curves were in good agreements with the experimental cloud temperatures.