• Macromolecular Research
• /
• v.16 no.2
• /
• pp.103-107
• /
• 2008

Carbon nanodots were prepared by the pyrolysis of a triblock copolymer. The triblock copolymer, poly(methyl methacrylate)-b-polystyrene-b-poly(methyl methacrylate) was synthesized by atom transfer radical polymerization using an initiator containing a diacetylene group. A polymer thin film on a mica substrate was prepared by spin-casting at 2,000 rpm from a 0.5 wt% toluene solution of the triblock copolymer. After drying, the cast film was vacuum-annealed for 48 h at $160^{\circ}C$. The annealed film formed a spherical morphology of polystyrene domains with a diameter of approximately 30 nm. The film was exposed to UV irradiation to induce a cross-linking reaction between diacetylene groups. In the subsequent pyrolysis at $800^{\circ}C$, the cross-linked polystyrene spheres were carbonized and the poly(methyl methacrylate) matrix was eliminated, resulting in carbon nanodots deposited on a substrate with a diameter of approximately 5 mn.

• Journal of the Korea Furniture Society
• /
• v.20 no.3
• /
• pp.198-204
• /
• 2009

Less used small diameter logs of black locust were heated at $250^{\circ}C$ for improving utilization. The volatile compounds emitted by the heated logs were analyzed. Their effect of formaldehyde absorption was evaluated with PB. Ester and acid compounds were dominant in content. Especially, methyl acetate and acetic acid showed the highest contents. The total content of aromatic compounds decreased as heating time increased. Amoung ketone compounds, The contents of 2-propanone, 2-pentanone, 3-petanone, 3-hexanone and cyclopentenone decreased with the increase of heating time, but the others did not. The contents of the chemicals, furfural and 3-pentanol, increased with heating time, while that of 2-methyl butanal decreased. It was hard to say that formaldehyde was absorbed by the heated black locust samples. Some decorative goods were designed with the heated logs.

• Biomolecules & Therapeutics
• /
• v.32 no.2
• /
• pp.231-239
• /
• 2024

Methyl anthranilate (MA) is a botanical fragrance used in food flavoring with unexplored potential in anti-pigment cosmetics. MA dose-dependently reduced melanin content without affecting cell viability, inhibited dendrite elongation and melanosome transfer in the co-culture system of human melanoma cells (MNT-1) and human keratinocyte cell line (HaCaT), and downregulated melanogenic genes, including tyrosinase, tyrosinase-related protein 1 and 2 (TRP-1, TRP-2). Additionally, MA decreased cyclic adenosine monophosphate (cAMP) production and exhibited a significant anti-pigmentary effect in Melanoderm^TM. These results suggest that MA is a promising anti-pigmentary agent for replacing or complementing existing anti-pigmentary cosmetics.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.19 no.3
• /
• pp.239-247
• /
• 1990

The oxidation products from the mixture of a-tocopherol (a-Toc) and γ-tocopherol)(γ-Toc) during autoxidation of methyl linoleate were isolated and identified. The sturctures of the oxida-tion products were characterized by UV, IR, 1H and 13CNMR and mass spectrometry 5-[2-(a-tocopherol-5'-yl)ethyl]-a-tocopherylquinone 5-[2-(a-tocopherol-5'-yl)ethyl]-8a-hydroxy-a-tocopherone and O-[8-(5-ethoxymethyl-7-methyltocol) methyl] a-tocopherol were obained from the mixture as the oxidation products derived from γ-Toc However oxidation product composed of both a-ToC and γ-Toc was detected in oxidation products of the misture. These results support the facts that at first oxidation of a-Toc proceeds during autoxidation of lipids and then γ-Toc decomposes after approximate consumption of a-Toc.

• The Korean Journal of Pesticide Science
• /
• v.6 no.1
• /
• pp.36-41
• /
• 2002

Characteristics of regrowth and starch degradation in perennial weed rhizomes were investigated in a greenhouse. Cyperus serotinus started regrowth at 24 days after treatment of 1.25 g ai/ha of pyrazosulfuron-ethyl. The regrowth of Sagittaria trifolia, Eleocharis kuroguwai, and S. pygmaea required $30{\sim}39$ days, and Potamogeton distinctus regrew at 55 days after treatment of 1.25 g ai/ha of pyrazosulfuron-ethyl. However, all of 5 perennial weeds hardly regrew until 45 days after treatment more than 5 g ai/ha of pyrazosulfuron-ethyl. Regrowth of C. serotinus 4-node rhizomes was 2 times higher than 2-node rhizomes, and $1{\sim}1.5g$ of E. kuroguwai large tubers regrew faster than $0.3{\sim}0.5g$ of small tubers treated with bensulfuron-methyl. Regrowth of C. serotinus was enhanced with delayed application of bensulfuron-methyl, however, 2-leaf stage of E. kuroguwai plants regrew better than 3 leaf stage of plants when treated with equal volume of bensulfuron-methyl. The critical periods of S. trifolia and E. kuroguwai growth depending upon the rhizome detachment were 12 and 18 days after sprouting, respectively. The starch stacked in the S. trifolia and E. kuroguwai tubers were exhausted at 18 and 27 days after sprouting, respectively. The highest level of sugar contents was showed at 9 days after sprouting in S. trifolia, and 18 days after sprouting in E. kuroguwai.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.12
• /
• pp.4161-4164
• /
• 2012

Density functional MO calculations for the methylsilole anion of $[C_4H_4SiMe]^-$ and methylgermole anion of $[C_4H_4SiMe]^-$ at the B3LYP (full)/6-311+$G^*$ level (GAUSSIAN 94) were carried out and characterized by frequency analysis. The ground state structure for the methylsilole anion and methylgermole anion is that the methyl group is pyramidalized with highly localized structure. The difference between the calculated $C_{\alpha}-C_{\beta}$ and $C_{\beta}-C_{\beta}$ distances are 9.4 and 11.5 pm, respectively. The E-Me vector forms an angle of $67.9^{\circ}$ and $78.2^{\circ}$ with the $C_4E$ plane, respectively. The optimized structures of the saddle point state for the methylsilole anion and methylgermole anion have been also found as a planar with highly delocalized structure. The optimized $C_{\alpha}-C_{\beta}$ and $C_{\beta}-C_{\beta}$ distances are nearly equal for both cases. The methyl group is located in the plane of $C_4E$ ring and the angle between the E-Me vector and the $C_4E$ plane for the methylsilole anion and methylgermole anion is $2.0^{\circ}$ and $2.3^{\circ}$, respectively. The energy difference between the ground state structure and the transition state structure is only 5.1 kcal $mol^{-1}$ for the methylsilole anion. However, the energy difference of the methylgermole anion is 14.9 kcal $mol^{-1}$, which is much higher than that for the corresponding methylsilole monoanion by 9.8 kcal $mol^{-1}$. Based on MO calculations, we suggest that the head-to-tail dimer compound, 4, result from [2+2] cycloaddition of silicon-carbon double bond character in the highly delocalized transition state of 1. However, the inversion barrier for the methylgermole anion is too high to dimerize.

• Korean Journal of Optics and Photonics
• /
• v.17 no.5
• /
• pp.480-486
• /
• 2006

Generally, IR cut-off filters for mobile phone is coated on the glass substrate at high temperature(above $300^{\circ}C$). In this work, we prepared IR cut-off filters on the poly(methyl methacrylate)(PMMA) substrates at low temperature(about $70^{\circ}C$ ). using the $CeO_2\;and\;SiO_2$ coatings by physical vapor deposition. The surface energies of coated and uncoated PMMA, and adhesive properties of IR cut-off filters coatings were examined using contact angle measurements. We demonstrate the improve of mobile phone optical system using these results.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.2
• /
• pp.502-508
• /
• 2018

The acrylate copolymer having good coating, water-repellent and adhesion properties was designed and prepared. We prepared copolymers with high yield of > 95% using methyl methacrylate(MMA), 2,2,2-trifluoroethyl acrylate (FMA) and 2-hydroxyethyl methacrylate monomers(HEMA) by either bulk or emulsion polymerization techniques. The $^1H-NMR$ spectrum was used to identify chemical structure and DSC and DMA analysis were conducted. As a result, the glass transition temperature decreased by $3^{\circ}C$ as FMA content increased from 5% to 10%, and decreased by $2{\sim}8^{\circ}C$ when HEMA content increased from 5 % to 10 %. The physical properties were measured using Instron and TGA. As FMA or HEMA content increased by 10%, tensile strength decreased from 29 MPa to 22 MPa and Td decreased from $200^{\circ}C$ to $180^{\circ}C$ in both bulk and emulsion. The contact angle relatively decreased as hydrophilic HEMA content increased.

• Bulletin of the Korean Chemical Society
• /
• v.11 no.6
• /
• pp.521-527
• /
• 1990

The binding characteristics and analytical applications of anilinium ion complexes with 18-crown-6 were studied by polarography and NMR. First, the electrochemical reduction of the 10 species of mono and dimethylsubstituted anilinium ion complexes with 18-crown-6 as host in methanol are examined. The addition of 18-crown-6 to anilinium guest solution the polarographic waves remain well defined but shifted toward more negative potentials, indicating the complex formation. The values of formation constants, log Κ for 10 species of methylsubstituted anilinium ion complexes with 18-crown-6 varies from 2.7 to 4.8 in methanol at $25^{\circ}C$. The stability order of complexes for 18-crown-6 is anilinilum > 4-methyl > 3,4-dimethyl > 3-methyl > 3,5-dimethyl > 2,4-dimethyl > 2,5-dimethyl > 2,3-dimethyl > 2-methyl > 2,6-dimethylanilinium ion. The steric hindrance shows significant effect. Second, Proton NMR was used to elucidate their interaction characteristics. From the results of so called NMR titration techniques, the behaviors of binding sites on complexation, and the stoichiometry and stability order of complex were obtained. And the later results show the satisfactory agreement with the quantitative values obtained by polarography. Finally, the individual determinations of anilinium ion mixtures were also accomplished by addition of 18-crown-6. In some mixtures of methyl or dimethylanilinium ions the reduction peaks of differential pulse method appeared into one unresolved wave attributed to the small difference of half-wave potential, ${\Delta}E_{1/2}$. In the presence of 18-crown-6, the polarographic waves were resolved into individual maxima because of the shift toward more negative direction by the difference of selectivity of anilinium ions with 18-crown-6. It may be concluded that quantitative analysis of methylanilinium ion mixture make possible because the half-wave potential shift by the selectivity difference due to the steric hindrance between methyl group and 18-crown-6 on complexation.

• Polymer(Korea)
• /
• v.25 no.6
• /
• pp.796-802
• /
• 2001

Novel monomer for polybenzimidazole was prepared and polymerized via aromatic nucleophilic substitution reaction. Thus, N-(4-fluorobenzoyl)-4-methoxy-N'-naphthyl-1,2-phenylenediamine was synthesized from the reaction of 4-methoxy-N-naphthyl-1,2-phenylenediamine and 4-fluorobenzoyl chloride. N-(4-fluorobenzoyl)-4-methoxy-N'-naphthyl-1,2-phenylenediamine was converted to 2-(4-fluorobenzoyl)-5-hydroxy-1-naphthylbenzimidazole by ring closure and demethylation reaction. Polymerization was done in N-cyclohexyl-2-pyrrolidinone (CHP) containing potassium car bonate. The resulting polymer was soluble in N-methyl-2-pyrrolidinone (NMP) and had inherent viscosity of 0.38 dL/g (NMP at $30^{\circ}C$). The glass transition temperature ($T_g$ ) of the polybenzimidazole was $270^{\circ}C$. The thermogravimetric analysis (TGA) thermograms of this polymer showed 5% weight losses at $550^{\circ}C$ in nitrogen and at $540^{\circ}C$ in air.