• 한국정보과학회논문지:데이타베이스
• /
• 제28권4호
• /
• pp.688-701
• /
• 2001

웹 캐쉬는 웹 응용의 성능향상을 위한 중요한 문제가 되었다. 본 논문에서는 웹 데이타에 부여 되는 만기시간(expiration time을 활용하여 웹 캐쉬의 성능을 향상시키는 방법을 제안한다. 먼저, 기존 캐 쉬 교체 알고리즘에서 사용된 참조확률에 만기시간의 영향을 반영한 유효참조확률(effective referenceprobability)의 개념을 제시한다. 그리고, 유효참조확률을 정형적으로 정의한 후, 확률적 모델 하에서 이 론적으로 유도한다. 기존의 교체 알고리즘에서 참조확률을 유효탐조확률로 대체하면 기존 교체 알고리즘에만기시간의 영향을 반영할 수 있다. 성능평가 결과, 유효참조확률을 사용한 알고리즘이 그렇지 않은 알고 리즘보다 항상 우수한 결과를 보였다. 이것은 제안한 방법이 만기시간을 고려하여 캐쉬효과를 얻을 이론적 인 확률을 정확히 반영한 방법으로서, 만기시간의 영향을 보다 효과적으로 반영하기 때문이다. 특히, 유효 참조확률은 캐쉬비율이 0.05이고 갱신이 비교적 자주 일어날 경우(갱신횟구가 참조횟수의 1/10이상인 경우)에 LRU-2의 경우 30% 이상. Aggarwal의 방법(refresh overhead factor가 통합된 PSS)의 경우 13%이상 성능을 개선하였다. 이 같은 결과는 유효참조확률이 만기시간이 주어지는 웹 캐쉬에서 크게 성능을 개선할 수 있음을 보여주고 있다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권8호
• /
• pp.1860-1875
• /
• 2013

In this paper, we present a comparative performance evaluation of the sampling frequency synchronization method that eliminates the initial sampling frequency offset (SFO) to reduce the overall synchronization time in Digital Radio Mondiale (DRM) receivers. To satisfy the advanced synchronization performance requirements of DRM receivers, we introduce the conventional DRM synchronization method (Method 1) and another method (Method 2), which does not perform the initial sampling frequency synchronization in the conventional synchronization method (both methods are mentioned later in this paper). To demonstrate the effectiveness of the performance evaluation, analytical expressions for frame detection are derived and simulations are provided. Based on the simulations and numerical analysis, our result shows that Method 2, with a negligible performance loss, is robust to the effects of the initial sampling frequency synchronization even if SFO is present in the DRM signal. In addition, we verify that the inter-cell differential correlation used between reference cells is robust to the effect of the initial SFO.

• 조명전기설비학회논문지
• /
• 제30권1호
• /
• pp.55-65
• /
• 2016

This paper proposed a new control method which is capable of controlling circulating current considering current capacity of switching device. In the unbalanced voltage conditions, active power and reactive power have double line frequency. Thus, in order to provide active power without ripple, it is necessary to inject the negative sequence current components. However, when the negative current components is injected, it increases the total current flowing in the Arm, and in the Sub-module(SM) the current more than rated is impressed, which leads to destroy the system. Also, in impressing the circulating current reference of each arm, conventional control method impressed applicable $i_{dck}/3$ in the case of balanced voltage conditions. In the case of unbalanced conditions, as arm circulating current of three phase show difference due to the power impressed to each arm, reference of each arm is not identical. In this study, in the case of unbalanced voltage, within permitted current, the control method to decrease the ripple of active power is proposed, through circulating current control and current limitations. This control method has the advantage that calculates the maximum active power possible to generate capacity and impressed the current reference for that much. Also, in impressing circulating current reference, a new control method proposes to impress the reference from calculating active power of each phase. The proposed control method is verified through the simulation results, using the PSCAD/EMTDC.

• Journal of Positioning, Navigation, and Timing
• /
• 제9권4호
• /
• pp.397-403
• /
• 2020

In order to synchronize a remote system time to the reference time like Coordinated Universal Time (UTC), it is required to compare the time difference between the two clocks. The time comparison data may have some outliers and the time synchronization performance can be significantly degraded if the outliers are not removed. Therefore, it is required to employ an effective outlier detection algorithm for keeping high accurate system time. In this paper, an outlier detection method is presented for the time difference data of GNSS time transfer receivers. The time difference data between the system time and the GNSS usually have slopes because the remote system clock is under free running until synchronized to the reference clock time. For investigating the outlier detection performance of the proposed algorithm, simulations are performed by using the time difference data of a GNSS time transfer receiver corrected to a free running Cesium clock with intentionally inserted outliers. From the simulation, it is investigated that the proposed algorithm can effectively detect the inserted outliers while conventional methods such as modified Z-score and adjusted boxplot cannot. Furthermore, it is also observed that the synchronization performance can be degraded to more than 15% with 20 outliers compared to that of original data without outliers.

• 조명전기설비학회논문지
• /
• 제27권8호
• /
• pp.30-35
• /
• 2013

This paper describes the assessment method of deterioration condition for a power transformer using SFRA. Frequency Response Analysis(FRA) is a method to evaluate the mechanical and geometrical integrity of the core and windings within a power transformer by measuring the electrical transfer functions over a wide frequency range. SFRA is sweep frequency response analyzer for power transformer winding diagnosis. The FRA is a comparative method, that evaluates the transformer condition by comparing the obtained set of FRA results to reference results on the same, or a similar, unit. FRA techniques were widely used and much more sensitive than the traditional and internationally accepted method of impedance measurements, but that work was required on standardization and interpretation. In order to analyze the deterioration condition for power transformer, overvoltage test and mechanical distortion test were carried out. The deterioration condition for power transformer was evaluated by SFRA. It is intended to present the elemental technology of assessment method for power transformer using SFRA.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2001년도 학술대회논문집
• /
• pp.65-72
• /
• 2001

Power system stabilizer act efficiently to damp the electromechanical oscillations in interconnected power systems. This paper presents an algorithm for the optimal parameter selection of a power system stabilizer in two-area power systems with a series HVDC link. This method is one of the classical techniques by allocating properly pole-zero positions to fit as closely as desired the ideal phase lead between the voltage reference and the generator electrical power and by changing the gain to produce a necessary damping torque over the matched frequency range. Control of HVDC converter and inverter are used a constant current loop. Proper parameters of PI controllers are obtain based on the Root-locus technique in other to have sufficient speed and stability margin to cope with charging reference values and disturbance. The small signal stability arid transient stability studies using the PSS parameters obtained from this method show that a natural oscillation frequency of the studycase system is adequately damped. Also the simulation results using the HVDC converter and inverter parameters obtained from this proposed method show proper current control characteristics. The simulation used in the paper was performed by the Power System Toolbox software program based on MATLAB.

• 한국통신학회논문지
• /
• 제19권5호
• /
• pp.796-804
• /
• 1994

본 논문은 Inverse SAR를 이용하여 속도를 모르는 움직이는 물체의 영상 이미지를 얻는 이미징 알고리즘을 제시하였고 실제 데이터를 알고리즘에 적용되었다. 실제 데이터는 stepped-frequency 변조된 레이더 신호를 송신하였고 수신된 데이터는 sampling rate이 충분하지 않으나 reference 신호를 mixing 시켜 unaliased 되게 만든 후 interpolation 에 의해서 해결하였다. 알고리즘을 적용시키는데 요구되는 물체의 속도는 subaperture processing 방법에 의해서 얻어졌으며 얻어진 속도에 의해서 squint-mode SAR geometry 로 변환한 후 최근에 제시된 approximation 이 없는 이미징 알고리즘을 사용하여 최종적으로 이미지를 얻게 되었다. 또한 ISAR가 데이터를 송수신 하는 동안 물체의 속도가 변하는 경우 이것을 보상하는 방법을 제시하였다.

• Journal of Electrical Engineering and Technology
• /
• 제12권3호
• /
• pp.1101-1107
• /
• 2017

In this paper, a robust and fast grid synchronization method of a three-phase power converter is proposed. The amplitude and phase information of grid voltages are essential for power converters to be properly connected into the utility. The phase-lock-loop in synchronous reference frame has been widely adopted for the three-phase converter system since it shows a satisfactory performance under balanced grid voltages. However, power converters often operate under abnormal grid conditions, i.e. unbalanced by grid faults and frequency variations, and thus a proper active and reactive power control cannot be guaranteed. The proposed method adopts a second order generalized integrator in synchronous reference frame to detect positive sequence components under unbalanced grid voltages. The proposed method has a fast and robust performance due to its higher gain and frequency adaptive capability. Simulation and experimental results show the verification of the proposed synchronization algorithm and the effectiveness to detect positive sequence voltage.

• International Journal of Computer Science & Network Security
• /
• 제24권4호
• /
• pp.206-210
• /
• 2024

Industrial facilities that use modern IT technologies require the ensured reliability and security of information in automated enterprise management. Concurrently, so as to ensure a high quality of communication, it is necessary to expand the bandwidth of communication channels, which are limited by the physical parameters of the radio frequency spectrum. In order to overcome this contradiction, we propose the application of technology fundamental to ultra-wideband signals, in which the ratio between the bandwidth and its central part is greater than "one". For this reason, the information signal is emitted without a carrier frequency - simultaneously within the entire frequency band - provided that the signal level is lower than the noise level. For the transmission of information content, the method of positional-time coding is used, in which each information bit is encoded by hundreds of ultrashort pulses that arrive within a certain sequence. Mathematical models of signals and values observed in wireless communication systems with autocorrelation reception of modulated ultra-wideband signals are furthermore recommended. These assist in identifying features of the dependence of the error probability on the normalized signal-to-noise ratio and the signal base. Comparative analysis has shown that the best noise immunity of the systems considered in this paper is the communication system, which uses the time separation of the reference and information signals. During the first half of the bit interval, the switch closes the output of the transmitter directly to the generator of the ultra-wideband signal - forming a reference signal. In the middle of the bit interval, the switch alternates the output to one of two possible positions depending on the encoding signal - "zero" or "one", forming the information part of the ultra-wideband signal. It should also be noted that systems with autocorrelation reception and separate transmission of reference and information signals, provide a high level of structural signal secrecy. Furthermore, they provide the reliable transmission of digital information, especially in interference conditions.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.555-558
• /
• 2002

The general ways of the anti-islanding can be classified into the active method and passive method. The passive method which use only the voltage information when power failure occurs has much possibility of the wrong detection. And the active method detects the change of the voltage frequency as instantaneously changing the frequency of the inverter output current. Therefore, in this paper, the method to inject arbitrary order harmonics into controlled current is proposed. In this method islanding can be detected by measuring the amount of load voltage of injected harmonics order. And as a current control method predictive control method is used, which make actual current accurately to track reference current by Instantaneously computing converter output voltage and has fast response in transient state. This parer proposed method was verified by simulation.