• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.11a
• /
• pp.229-230
• /
• 2011

We could see that, the thinner the retaining wall is, the more advantageous Premixed Agent Type Waterproof method is in the aspect of economic efficiency. The reason is because, in the case of Premixed Agent Type Waterproof method, the thicker the retaining wall is, the higher the construction cost increases due to increase in the material quantity required which increases in proportion to the area in the case of Premixed Agent Type Waterproof method. We could see that, the thinner the retaining wall is, the more inferior the economic efficiency of Infiltration Type Waterproof method is to that of Premixed Agent Type Waterproof method, as, in the case of Infiltration Type Waterproof method, the quantity of material required is fixed in proportion to the area. Consequently, we concluded that Premixed Agent Type Waterproof method is economically advantageous up to the wall thickness of 700 mm and Infiltration Type Waterproof from 800 mm.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.108-113
• /
• 1999

In structures, it is important to improve the capacity of waterproof in aspect of the durability and management of maintenance. Among the method of waterproof, self waterproof method is to improve the capacity of waterproof of structure itself. Thereby, we can expect the effect of durability and economics. In this study, we investigated the adding effect of waterproof admixture according to the water-cement ratio when used powder self waterproof admixture and analyzed the change of microstructure. Also, we were made to clear the mechanism of self waterproof admixture and intended to suggest the basic data on developing self waterproof admixture.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.6
• /
• pp.43-59
• /
• 2002

In this study, database systems which were used to select the waterproof method according to leakage patterns of underground structures were built by performing pilot tests, reviewing literatures, and analysing the gathered data statistically. The database was built by using check lists which consisted of 5 major items and 73 subdivided items, and 26 major parameters according to 4 classified grades were determined on the base of survey which considered various in-situ conditions. The database of waterproof methods was comprised of 10 methods which were applied in Korea. From the database of waterproof methods, application ranges and design conditions of waterproof methods were suggested. From the results of study, database system consists of parameters selection database, waterproof method database, and design condition database. From the results of pilot tests, when the database of waterproof methods was applied to design stage, saving time and reducing mistakes for selecting waterproof method were gained. In addition, when the database of waterproof methods was applied to construction stage, effects such as evaluation of applicability of waterproof method, improvement of constructability and post management were expected.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.233-234
• /
• 2019

Research has begun to change the waterproofing design of domestic underground structure parts from the current negative-side waterproof design to the positive-side waterproof design. For this, active review from the design stage to prevent the ingress of external ground water into the waterproofing measures of the underground of apartment buildings is needed. Therefore, in this study, proper waterproofing method for the major leaks identified in the previous studies and a waterproofing method for the waterproof design of the underground floor and the outer wall is proposed. It is hoped that a follow-up study, such as a review of field applicability, for the proposed methods will provide an alternative to secure leakage stability in waterproof design.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.05b
• /
• pp.213-217
• /
• 2009

Underground structures are built into concrete like a architecture and public works. Concrete has watertightness as such, But buildings are leaking from the cracks. Recently, construction method do a lot of close construction in the downtown area. So architects are using the method for the outer layer of a two-layer wall to save spaces. They have been using Top-down method and waterproof agent method and others to outer layer of a two-layer wall method. But, There are many leakage in underground structure from lack on requirements performance of materials. Therefore, I hope to test the outside Waterproof Method of Ground using Wire-mesh and Non-hardening Viscosity Waterproof. In addition to, I wish to apply as outside waterproof method for the section for the outer layer of a two-layer wall in underground structure.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.05a
• /
• pp.127-130
• /
• 2011

The duplex waterproofing construction method has been investigated to improve various problems (how to fix the sheet, breaking, air/water pocket, and cracks caused by different materials) of the existing rooftop exposed waterproofing construction method. By using fiber sheet, Net PE fabric, and thixotropy urethane with high viscosity, the waterproofing construction method is to glue the ground and waterproof course by circular dot. The method is also to construct the waterproof course with high hardness by using waterproof membrane coatings in upper hybrid system. By gluing the ground and the waterproof course by circular dot, the study is expected to be useful to minimize the simultaneous breaking in the waterproof course as tensile stress is buffer in case of the ground crackling. Also, since the waterproofing construction method is good at moving and emitting vapor from the ground, it is considered to be effective to minimize any damages caused by air/water pocket and get loose of the waterproof course.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.517-520
• /
• 2006

The waterproofing of Building on the roof has been exposed more underground or the other part of waterproofing than environmental factor(solar heat, UV, salt, acid rain, wind, temperature, snow, rain, etc.) or physical factor. So it must be have a waterproofing performance and it has a special technique for the maintaining of concrete durability. Therefore, exposed waterproof layer has to protected from UV, solar heat, rain and the outside environment also, to endurance durability methods spread face plate topcoat material on the waterproof layer. But, actuality faceplate waterproof layer of topcoat materials are unbearable to UV, solar heat and moisture etc. and it doesn't have adhesion with waterproof layer in the middle. So it happens to crack, separating and heaving etc. Therefore, in the study, we will suggest that using of the exposed roof waterproof layer topcoat materials test method manage rooftop waterproof layer for the durability and the stability.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.85-86
• /
• 2023

This study confirmed the improvement of the Composite Waterproof Method in which the sheet layer is partially attached with perforated film and the joint is FRP-treated.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.6-7
• /
• 2019

In order to solve problems such as scattered dust, dust and chemicals harmful to the human body, workability in a confined space, quality performance, and the like generated during the field construction of the conventional waterproof sheet construction method, a waterproof sheet is used as a PC formwork, Which is produced by pouring concrete after PC installation, and evaluating the applicability of the development method in comparison with the construction method of polypropylene waterproof sheet construction method and the construction period, safety, quality, construction cost.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.41-42
• /
• 2023

Test results for a total of four types of complex waterproofing methods were analyzed. In the case of the A method, the stress generated by high-viscosity compounds adhering to the base test body during the behavior of the test body was transferred to the sheet surface layer. In the case of the B method and the C method, the properties of the waterproof sheet consisting of a non-hardened seal based and a non-hardened seal are well reflected and stress absorption in the non-hardened seal layer acts strongly, rapidly reducing stress transfer to the surface of the waterproof sheet. In the case of the D method, slip occurs due to repeated behavior, and the stress on the attachment surface is reduced, and the stress transfer to the surface is greatly reduced. As a result, four types of composite waterproofing methods resulted in changing the stress transfer mechanism caused by behavior on the concrete surface due to the physical properties of the internal constituent material of the waterproof sheet.