• Journal of electromagnetic engineering and science
• /
• 제18권4호
• /
• pp.242-247
• /
• 2018

This paper studies a convenient electromagnetic field (EMF) compliance assessment for base station installations at a millimeter wave (mmW) frequency. We utilize ray-tracing analysis as a numerical method for examining the wave propagation characteristic. Various installation cases are considered and the important parameters with a significant effect on the maximum power density levels are produced. We finally suggest the several scenarios for the convenient assessment of mmW base stations, which allow us to conduct cost effective computational tests compared with the current assessment procedure in the guideline.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.147-147
• /
• 2009

Every year respect a countermeasure establishment the electric leakage detection system and electric leakage investigation work are becoming enforcement line plentifully in about the electric leakage accident which is increasing, measuring in compliance with a most ground connection voltage and an image electric current mainly is become accomplished, inputs a pulsation group signal in the line and detects a signal change between the line a method which there is. In order to investigate the quality in compliance with an electric leakage electric current from the electric leakage area after conferring the electric leakage environment in compliance with a flooding when the electric leakage electric current exists in the surface, it investigated the electric leakage electric current quality from the electric current distribution and flooded districts from the present paper.

• 대한조선학회논문집
• /
• 제61권2호
• /
• pp.88-97
• /
• 2024

This study performed the analysis on an economic feasibility of each marine fuel, potential fuel pathways and the relevance of compliance measures to ensure compliance with the FuelEU Maritime regulation. Additionally, it identified certain regulatory gaps to encourage the use of alternative marine fuels. Regarding GHG emissions calculations, the existing GHG regulations for ships applies the Tank-to-Wake (TtW) method, whereas FuelEU Maritime applies the Well-to-Wake (WtW) method. The main results present that important information to establish response strategy for FuelEU Maritime including the costs and benefits of each marine fuel, the minimum blending ratio of alternative fules, and compliance impacts of measures. For the regulatory costs and benefits of marine fuels following the implementation of the FuelEU Maritime from 2025, our findings indicate that while most fossil fuels incur regulatory costs from 2025, most of biofuels and RFNBO fuels do not incur costs until 2050. This will play a role to narrow the price gap between fossil fuels and alternative fuels.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 B
• /
• pp.874-876
• /
• 1995

Force and compliance control has been used in the control of legged walking vehicles to achieve superior terrain adaptability on rough terrains. The compliance control requires distribution of the vehicle load over the supporting legs. However, the constraint equations for ground reaction forces of supporting legs are generally underdetermined, allowing an infinite number of solutions. Thus, it is possible to apply an optimization criteria in solving the force setpoint problem. It has been observed that the previous force setpoint optimization methods sometimes cause a system stability problem and/or the load distribution among supporting legs is not well balanced due to a memory effect on the solution trajectory, This paper presents an iterative force setpoint method to solve this problem using an interpolation technique. By simulation it was shown that an excessive load unbalance among supporting legs and the memory effect in the force trajectory are alleviated much with the proposed method.

• 전력전자학회논문지
• /
• 제4권6호
• /
• pp.608-615
• /
• 1999

본 논문에서는 초음파 모터의 위상차 구동원리에 관해서 명확히 하였고, 이를 이용하여 점·탄성 특성을 갖는 컴플라이언스 제어를 제시하였다. 제안된 컴플라이언스 제어는 인간의 근골격 시스템으로부터 유출하여 인간의 운동특성과 같이 매니퓰레이터의 관절 토크를 점성과 탄성계수의 조절에 의해 매니퓰레이터의 위치와 자세가 제어되도록 하였다. 초음파 모터의 위상차 구동원리에 대한 타당성을 모의실험을 통해 검증하였으며, 제시된 제어방법의 타당성을 검증하기 위하여 초음파모터를 이용하여 2축 수평형 직접구동 매니퓰레이터를 제작하여 점성과 탄성 특성에 대한 실험을 하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 춘계학술대회 논문요약집
• /
• pp.321-321
• /
• 2004

본 연구에서는 웨이퍼 단면 연삭기 구조물의 경량화 고강성화 최적설계를 위하여 가변벌점함수 유전 알고리즘을 이용한 다단계 최적설계 방법을 적용하였다. 구조강성 최대화와 중량 최소화라는 상반된 성질의 목적함수를 최적화하기 위하여 강성의 역수 개념인 컴플라이언스(compliance)를 도입하여 목적함수론 최소화시키는 문제로 만들었으며, 가증방법(weighted method)을 이용하여 다목적 함수를 단일 목적함수로 변환시켰다. 부재 단면형상 최적화 단계와 정적설계 최적화 단계, 및 동적 설계 최적화 단계를 순차적으로 수행하는 다단계 최적설계를 방법을 연삭기 구조물의 최적설계에 적용하였다.(중략)

• 한국정밀공학회지
• /
• 제15권6호
• /
• pp.159-166
• /
• 1998

The problem of interface crack in the bonded structures has received a great deal of attention in recent years. In this paper the aluminum bonded single lap-joint containing the interface edge crack is investigated. The tensile load and the average shear stress of the adhesive joints which have different crack length are obtained from the static tensile tests. The critical value of crack length to provoke the interface fracture is determined to a/L=0.4, where a is the interface crack length and L is the adhesive lap-length. The fracture mechanical parameters are introduced to confirm the existence of the critical crack length. The compliance and the stress intensity factors are calculated using the displacement and the stress near the interface crack tip by the boundary element method. These numerical results support the experimental results that the critical value of a/L is 0.4. It is known that the compliance and the stress intensity factors are the efficient parameters to estimate the bonded single lap-joint containing the interface edge crack.

• 한국직업건강간호학회지
• /
• 제7권2호
• /
• pp.143-154
• /
• 1998

The purpose of this research is to suggest basic materials for the practical infection precaution program to protect health care workers from hospital infection by grasping their compliance level of Universal Precautions and examining the factors affecting them. The number of the health care workers we studied were 486, including the doctors, the nurses, and the lab technicians who were working in a university hospital. The period of this research was from Aug. 18th, 1997 to Aug. 30th, 1997. The method of the study was to measure the compliance level of Universal Precautions with the item of "Universal Precautions" established by CDC in 1987, and examine the questionnaire of 52 questions dividing related factors into socio-populational, individual, socio-psychological and organizational management ones. The data was analyzed by t-test. ANOVA, and chi-square test. The results were as follows : 1. An the compliance level of Universal Precautions, hand washing had the highest score(85.4%), and doctors(18.9%), nurses(44.0%), and lab technicians(7.6%), had a low compliance level in the safe handling of an injection syringe, and item not to handle patients and their samples when the subject suffered from dermatitis or injury had the lowest score of 17.1%. 23.3% of them said that they wear protection gown, goggles and mask. 2. Female's Compliance level of Universal Precautions Was higher than male. 3. The health care workers who had high recognition on Universal Precautions got significantly higher compliance level of Universal Precautions than those have low recognition on Universal Precautions(P<0.001). 4. The health care workers experienced a needle stick injury had a significantly higher compliance level of Universal Precautions than those who had not(P<0.000). 5. The health care workers who had infection protection education got a significantly higher compliance level of Universal Precautions than those who didn't(P<0.000). 6. The health care workers who had a firm belief in the effect of Universal Precautions got a higher compliance level of Universal Precautions than those who didn't. 7. The health care workers who had less conflicts between treating patient arid protecting them-selves got a higher compliance level of Universal Precautions than others with many conflicts. 8. The health care workers who had a high score in organizational management factors got a significantly higher compliance level of Universal Precautions than those with a low score(P<0.000). 9. Only 16.9 percent of the all respondents(82 in number) answered that they knew well or a little about the Universal Precautions, which is very low rate of recognition. 10. The variables which affected the score in organizational management factors were age, sex, education period, work experience, the kind of work, recognition on Universal Precautions, the experience of needle stick injury, revealing dangerous circumstance related to infection, and training on precaution again infection. According to the result above, compliance level of Universal Precautions showed high correlation with sex, the recognition on Universal Precautions, the experience of needle stick injury, training on precaution against infection, the belief in the effect of Universal Precautions, the recognition degree of conflicts and organizatinal management factors. These results could be used as the basic materials for the developing infection protection programs. Also, There should have a systematic training course to elevate a effective compliance level of Universal Precautions as well as the manageeent of infection protection programs.

• 대한기계학회논문집A
• /
• 제20권11호
• /
• pp.3491-3497
• /
• 1996

The work factor approach was applied to determine $G_ {IC}$ of fiber reinforced composites (AS4/3501) from a single unidirectional (0-deg) DCB specimen. Elastic work factors of DCB specimen for three different symmetrical staking sequences were derived from a simple bending theory and a finite element method. The results showed that elastic work factors calculated from both methods were comparable each other. In particular, the elastic work factor of DCB specimen with symmetrical stacking sequence is independent of stacking sequence. The $G_ {IC}$ determined from the work factor approach was compared with that determined by the compliance method. The results showed that the work factor approach and the compliance method produce comparable results of $G_ {IC}$. Thus, $G_ {IC}$ can be determined from a single DCB specimen using the work factor approach.

• 한국소음진동공학회논문집
• /
• 제14권4호
• /
• pp.295-302
• /
• 2004

In this study the optimization of a NFR suspension is performed using finite element method and experimental modal analysis. NFR suspensions are required to have low compliance modes to allow the slider to comply with the rotating disk, and high tracking stiffness modes to maximize the servo bandwidth of the tracking controller First of all, the dual suspension model is designed based on the characteristics of NFR drives. And the parametric study on the sensitivities of compliance modes and tracking stiffness modes is investigated. Finally, the model satisfying static characteristics is selected and shape optimization is performed to improve dynamic characteristics. A prototype of a NFR suspension is made by etching and modal ekperiment in free state is performed. The results of experiment almost agree with those of finite element method.