• 한국연초학회지
• /
• 제33권1호
• /
• pp.16-20
• /
• 2011

This study was carried out in order to improve the Mohr method for protein-nitrogen concentration determining. Existing Mohr's method takes seven hours to analyze for one sample. In order to make up for these things tried to utilize filter bag(F75, ANKOM) for sample treatment. As a result of this implementation, have saved sample loss amount and analyzing time for a quarter comparing with Mohr's method. In addition, it have gotten high efficiency through five samples hydrolyze per one trial by using ANKOM hydrolysis system with 0.5% acetic acid. Besides, had a good reproducibility for analysis results in relation to nitrogen concentration determining with Dumas methodology. Thus, new Mohr's method takes one day to analyze for 40 sample. It is more efficiency about 6 times compare with existing Mohr's method. And, this modified Mohr's method was verified that is substitutable for the existing Mohr's method in statistical analysis.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 하계학술대회 논문집
• /
• pp.634-636
• /
• 2008

This paper proposes a frequency detection method based on an advanced zero-crossing technique. Zero-crossing method for detecting frequency is one of the most widely used methods today. Although it is simple to apply, it requires extra hardware in implementation due to its limitations in accuracy. The proposed method models the error generated during zero crossing linearization and compensated for it in real time which makes it simple and accurate. The validity of the method and its applicability in anti-islanding detection of distributed generators was confirmed through simulation.

• Structural Monitoring and Maintenance
• /
• 제1권3호
• /
• pp.309-322
• /
• 2014

Detection of fatigue cracks at an early stage of their development is important in structural health monitoring. The breathing of cracks in a structure generates higher harmonic components of the exciting frequency in the frequency spectrum. Previously, the residual operational deflection shape (R-ODS) method was successfully applied to beams with a single crack. The method is based on the ODSs at the exciting frequency and its higher harmonic components which consider both amplitude and phase information of responses to map the deflection pattern of structures. Although the R-ODS method shows the location of a single crack clearly, its identification for the location of multiple cracks in a structure is not always obvious. Therefore, an improvement to the R-ODS method is presented here to make the identification process distinct for the beams with multiple cracks. Numerical and experimental examples are utilised to investigate the effectiveness of the improved method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.209-212
• /
• 1988

This paper presents a new uniform sampling method for two-dimensional contour. The proposed method improves the uniformity of contour sampling in terms of the interpolation of the corner points extracted from chain codes. The performance of the proposed method is analyzed through the length estimation and shape recognition of two-dimensional contour. The experimental results show the significant improvement over the conventional method.

• 한국정보처리학회논문지
• /
• 제6권9호
• /
• pp.2294-2304
• /
• 1999

본 논문은 병렬 입출력과 효율적인 디스크 접근을 이용하여 입출력 성능을 높임으로써 지리 정보 시스템의 질의 처리 성능을 향상시키는 것을 목적으로 한다. 동시에 접근할 가능성이 높은 인접한 공간 데이터를 디스크의 논리적 블록 단위로 패킹하여 하나 또는 연속적인 논리적 블록으로 클러스터링 하면 한번의 디스크 접근으로 많은 공간 데이터를 읽을 수 있어 질의 처리에 따른 디스크 접근 횟수와 디스크 접근 오버 헤드를 줄임으로써 입출력 시간을 줄일 수 있다. 본 논문에서는 기존 Parallel R-tree 기법의 병렬 입출력 기법과 패킹 기반 클러스터링 기법을 결합하여 효율적인 입출력을 지원하는 EPR(Enhanced Parallel R-tree) 색인 기법을 제안한다. EPR 기법의 주요 특징은 다음과 같다. 첫째, 공간 데이터를 Hilbert space filling curve를 이용하여 인접도에 따라 정렬하여 패킹함으로써 상향식으로 R-tree를 생성한다. 둘째, 정렬된 공간 데이터를 패킹하여 하나 또는 연속적인 논리적 블록에 저장하는 패킹 기반 클러스터링을 통해 공간 데이터 클러스터를 구성한다. 셋째, 색인 기법 및 공간 데이터 클러스터를 round-robin 스트라이핑 방식을 통해 다중 디스크에 분산 배치한다. EPR 기법과 기존 PR 기법의 성능을 비교한 결과, 공간 질의 처리 속도가 30% 이상 향상되었으며, 특히 논리적 블록의 크기가 클수록, 공간 데이터의 크기가 작을수록 질의 처리 성능이 향상되는 결과를 보였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.1049-1052
• /
• 2004

In general, contrary to the CRTs with impulsive emission, liquid crystal displays have motion artifacts such as blurring. ghost image, decrease of dynamic CR(contrast ratio), and stroboscopic motion due to hold type driving method. In this paper, to improve motion picture quality of LCDs. impulsive driving method of black data insertion was applied to the OCB mode which is well known for its fast LC response time and wide viewing angle properties. Subject evaluation was carried out with CRT, TN, SIPS(Super IPS). and impulsive driving OCB. Moving picture image quality near CRT was obtained in impulsive OCB driving mode

• 설비공학논문집
• /
• 제10권6호
• /
• pp.732-742
• /
• 1998

Prediction method for heat transfer coefficients in a horizontal smooth tube with forced convection condensation is proposed. In this paper, the analogy between momentum and heat transfer was applied to an annular flow regime and the logarithmic velocity distribution is applied to describe the velocity profile within the liquid film. Prediction results are compared with those of experimental ones. The test refrigerants are R113, R22, R134a, R407C(R33/R125/R134a, 23/25/52 wt%), R410A(R32/R125, 50/50 wt%) and R134a＋R123(R134a/R123, 85.5/14.5 wt%) which are used under operating conditions in a condenser of air-conditioner. The proposed prediction method shows good agreement with experimental data within$\pm 30%$ for pure refrigerants. For the mixture refrigerants including the ternary mixture refrigerant R407C, condensation heat transfer from this study are higher than those from experiments. By correcting the constant in two-phase frictional multiplier, the predicated heat transfer coefficients become similar to the experimental results.

• 소성∙가공
• /
• 제12권5호
• /
• pp.504-512
• /
• 2003

The plastic strain ratios(R-values) of low carbon steel sheets were determined by the automatic strain measurement method using two extensometers, the indirect photo method for the same tensile specimen during tensile test and the indirect method for the specimen after tensile test. The experimental results showed that the measured plastic strain ratios from the automatic strain measurement method using two extensometers coincided with those from the indirect photo method and the indirect method for all tensile specimens. In addition, the strain dependence of plastic strain ratios could be continuously recorded and the anisotropy of the strength coefficient, K, and strain hardening exponent, n, could be automatically calculated in three directions by computer through the use of two extensometers. The experimental results showed that the strain dependence of R-value was related to the anisotropy of strain hardening exponent in low carbon steel sheets.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 추계학술대회 논문집
• /
• pp.231-232
• /
• 2007

• 항공우주시스템공학회지
• /
• 제17권4호
• /
• pp.133-143
• /
• 2023

ICT의 발전으로 드론(이하, 무인기(Unmanned Aerial Vehicle, UAV)와 동일)이 대중화됨에 따라, 농업, 건축업 등 다양한 분야에서 드론이 유용하게 사용되고 있다. 그러나, 악의적인 공격자는 고도화된 드론을 통해 국가주요기반시설에 위협을 가할 수 있다. 이에, 불법드론의 위협에 대응하기 위해 안티드론 시스템이 개발되어왔다. 특히, 드론이 브로드캐스트하는 원격 식별 데이터(Remote-ID, R-ID) 데이터를 기반으로 불법드론을 탐지·식별하는 R-ID 기반 UAV 탐지·식별 시스템이 개발되어 세계적으로 많이 사용되고 있다. 하지만, 이러한 R-ID 기반 UAV 탐지·식별 시스템은 무선 브로드캐스트 특성으로 인해 보안에 매우 취약하다. 본 논문에서는 R-ID 기반 UAV 탐지·식별 시스템의 대표적인 예인 DJI 사(社) Aeroscope를 대상으로 보안 취약성을 분석하여, 재전송 공격(Replay Attack) 기반 무력화 방식을 제안하였다. 제안된 무력화 방식은 소프트웨어 프로그램으로 구현되어, 실제 테스트 환경에서 4가지 유형의 공격에 대해 검증되었다. 우리는 검증 결과를 통해 제안한 무력화 방식이 R-ID 기반 UAV 탐지·식별 시스템에 실효적인 무력화 방식임을 입증하였다.