• 전기학회논문지
• /
• 제56권7호
• /
• pp.1331-1338
• /
• 2007

A new method for detecting and eliminating the Electrocardiogram(ECG) artifact from the scalp Electroencephalogram(EEG) is proposed. Based on the single channel EEG, the proposed method consists of 4 procedures: emphasizing the R-wave of ECG artifact from EEG using the least squares acceleration(LSA) filter, detecting the R-wave from the LSA filtered EEG using the phase space method and R-R interval, generating the delayed impulse synchronized to the R-wave and elimination of the ECG artifacts based on the adaptive digital filter using the impulse and raw EEG. The performance of the proposed method was evaluated in the two separating parts of R-wave detection and, ECG estimation and elimination from EEG. In the R-wave detection, the proposed method showed the mean error rate of 6.285(%). In the ECG estimation and elimination using simulated and/or real EEG recordings, we found that the ECG artifacts were successfully estimated and eliminated in comparison with the conventional multi-channel techniques, in which independent component analysis and ensemble average method are used. From this we can conclude that the proposed method is useful for the detecting and eliminating the ECG artifact from single channel EEG and simple for ambulatory/portable EEG monitoring system.

• 설비공학논문집
• /
• 제13권4호
• /
• pp.242-251
• /
• 2001

Flow boiling heat transfer coefficients (HTCs) of R22, R134a, R407C, and R410A were measured for a horizontal plain tube. The test section was made of a copper tube of 8.8mm inner diameter and 1000mm length respectively. The refrigerant was heated by passing hot water through an annulus surrounding the test section. All tests were performed at a fixed refrigerant saturation temperature of $5^{\circ}C$ with mass fluxes of 100~300 kg/$m^2$,/TEX>s. HTCs were measured by two methods: the direct wall temperature measurement method and the indirect Wilson plot method. Experimental results showed that the Wilson plot method was affected greatly by the external test conditions and yielded inconsistent results. For the mass flux of 100kg/$m^2$,/TEX>s, HTCs were almost constant regardless of the quality for a given refrigerant HTCs of R134a and R407C were similar to those of R22 while those of R410A were 60% higher than those of R22. For the mass fluxes of 200 and 300kg/$m^2$,/TEX>s, HTCs of R407C were almost the same as those of R22, while HTCs of R134a and R410A were 12-13% and 20~23% higher than those of R22 respectively. For pure refrigerant, Shah\`s correlation yielded a good agreement with the measured data both qualitatively and quantitatively.

• 한국건설관리학회논문집
• /
• 제5권5호
• /
• pp.143-150
• /
• 2004

본 연구는 다기준의사결정문제인 건설 프로젝트의 공법선정문제에 있어서 퍼지계층분석법 및 그 결과 생성되는 각 공법별 퍼지 점수의 상대평가를 위해 퍼지 선호도 함수를 적용하여 상대평가를 하고자 하였다. 지금까지의 건설 공법 선정에 대한 퍼지계층분석법에 대한 연구는 대부분 최종적인 공법선정을 위해서 각 공법별로 도출된 퍼지 점수의 순위결정기법으로 절대평가를 수행하였다. 그러나 이러한 기법은 비교 대상공법에 대한 일관적인 순위결과를 산출해 내지 못하므로 결과적으로 공법선정과정의 전반적인 타당성을 저해하는 문제점을 지니고 있었다. 따라서 본 연구에서는 건설 분야의 MCDM(Multiple Criteria Decision Making)에 관한 기존의 연구들을 바탕으로 순위 결정기법에 R.P.R(Relative Preference Ratio)기법을 도입하여 각 공법에 대한 퍼지 점수를 상대 평가함으로써 체계적이고 효율적인 건설 공법선정기법을 제시하였고, 이를 창호공법의 선정문제에 적용하여 그 타당성을 살펴보았다.

• 한국지능시스템학회논문지
• /
• 제18권4호
• /
• pp.572-578
• /
• 2008

본 논문에서는 대규모 베이지안 망 구조 학습을 위해 제안되었던 R-CORE 방법의 탐색 공간의 크기에 대한 개략적인 분석과 실제 문제에 적용하였을 경우의 효과에 대한 실험적 결과를 제시한다. R-CORE 방법은 베이지안 망 구조 학습의 탐색 공간을 축소하기 위해 제안된 확률변수들의 재귀적 군집화와 오더 제한 방법이다. 알려진 벤치마크 베이지안 망을 이용한 분석을 통해, 제안되었던 R-CORE 방법이 worst case에는 기존의 방법과 유사한 탐색 공간을 가지나 평균적으로 기존방법보다 훨씬 적은 탐색 공간만을 고려한다는 것을 보인다. 또한 평균적으로 훨씬 적은 탐색 공간만을 고려하는 결과, 구조 탐색에서 기존 방법에 비해 상대적으로 적은 overfitting이 일어남을 실험적으로 보인다.

• Journal of Welding and Joining
• /
• 제15권4호
• /
• pp.178-186
• /
• 1997

The purpose of this study is to evaluate the J-R curve characteristics for the 5083 aluminum alloy weldment by the load ratio analysis. The results of the load ratio analysis are compared with those of the J-R curve which are obtained by the ASTM unloading compliance method. The crack length calculated by the load ratio analysis is agrees well with the measured final crack length. The slope of the exponential J-R curve estimated by the load ratio analysis is slightly smaller than that by the ASTM unloading compliance method. The exponential correlation of the J-R curve for the 5083 aluminum alloy base metal by the load ratio analysis is J = 93.88 ${\Delta}{\alpha}^{0.375}$. That for the weld metal and HAZ is J = 69.87 ${\Delta}{\alpha}^{0.389}$ and J = 70.59 ${\Delta}{\alpha}^{0.359}$ respectively. The J-R curve obtained by the ASTM unloading compliance method is overpredicted and should be offsetted due to the initial negative crack. On the other hand, the load ratio analysis method can evaluate the J-R curve by only load displacement curve without particular crack measurement equipment.

• 대한의생명과학회지
• /
• 제15권3호
• /
• pp.229-232
• /
• 2009

DNA isolation for PCR-based short tandem repeat (STR) analysis is essential to recover high yields of amplifiable DNA from low copy number (LCN) DNA samples. There are different methods developed for DNA extraction from the small bloodstain and gloves, commonly found at crime scenes. In order to obtain STR profiles from LCN DNA samples, DNA extraction protocols, namely the automated $iPrep^{TM}$ $ChargeSwitch^{(R)}$ method, the automated $QIAcube^{TM}$ method, the automated $Maxwell^{(R)}$ 16 DNA $IQ^{TM}$ Resin method, and the manual $QIAamp^{(R)}$ DNA Micro Kit method, were evaluated. Extracted DNA was quantified by the $Quantifiler^{TM}$ Human DNA Quantification Kit and DNA profiled by $AmpFISTR^{(R)}$ $Identifiler^{(R)}$ Kit. Results were compared based on the amount of DNA obtained and the completeness of the STR profiles produced. The automated $iPrep^{TM}$ $ChargeSwitch^{(R)}$ and $QIAcube^{TM}$ methoas produced reproducible DNA of sufficient quantity and quality trom the dried blood spot. This two automated methods showed a quantity and quality comparable to those of the forensic manual standard protocols normally used in our laboratory. In our hands, the automated DNA extraction method is another obvious choice when the forensic case sample available is bloodstain. The findings of this study indicate that the manual simple modified $QIAamp^{(R)}$ DNA Micro Kit method is best method to recover high yields of amplifiable DNA from the numerous potential sources of LCN DNA samples.

• 디지털산업정보학회논문지
• /
• 제13권4호
• /
• pp.91-98
• /
• 2017

Previous works for detecting arrhythmia have mostly used nonlinear method such as artificial neural network, fuzzy theory, support vector machine to increase classification accuracy. Most methods require higher computational cost and larger processing time. Therefore it is necessary to design efficient algorithm that classifies PVC(premature ventricular contraction) and decreases computational cost by accurately detecting minimal feature point based on only R peak through optimal R wave. We propose an optimal R wave detection and PVC classification method through extracting minimal feature point in IoT environment. For this purpose, we detected R wave through optimal threshold value and extracted RR interval and R peak pattern from noise-free ECG signal through the preprocessing method. Also, we classified PVC in realtime through RR interval and R peak pattern. The performance of R wave detection and PVC classification is evaluated by using record of MIT-BIH arrhythmia database. The achieved scores indicate the average of 99.758% in R wave detection and the rate of 93.94% in PVC classification.

• 응용통계연구
• /
• 제29권1호
• /
• pp.171-180
• /
• 2016

바젤 위원회는 시장위험의 측정 도구로 Value-at-Risk(VaR)와 expected shortfall(ES)을 사용할 것을 제안하였다. 여러 문헌에서 VaR와 ES의 다양한 추정 방법들이 연구 되었다. 본 연구에서는 준모수적인 방법인 conditional autoregressive value at risk(CAViaR), conditional autoregressive expectile(CARE) 방법들, 그리고 Gaussian 준최대가능도 추정량(QMLE)를 이용한 방법을 사후 검정을 통해서 비교하고자 한다. 각 방법의 타당성을 확인하기 위해서, VaR에 대한 사후 검정은 unconditional coverage(UC)와 conditional coverage(CC) 검정을 사용하고 ES에 대한 검정은 붓스트랩 방법을 사용한다. S&P500 지수와 현대 자동차 주식가격 지수에 대하여 실증 자료 분석이 수행되었다.

• Archives of Pharmacal Research
• /
• 제29권1호
• /
• pp.108-111
• /
• 2006

The economic and effective method for preparation of R-(-)-ibuprofen by diastereomer crystallization was developed. R-(-)-ibuprofen was resolved from racemic ibuprofen by forming R-(-)ibuprofen-R-(+)-$\alpha$-methylbenzylamine diastereomeric salt with R-(+)-$\alpha$-methylbenzylamine and crystallization. The purity of R-(-)-ibuprofen-R-(+)-$\alpha$-methylbenzylamine diastereomeric salt was tested and confirmed using HPLC and $^1H-NMR$ method. The pure diastereomeric salt collected from repeated recrystallization was further fractionated by liquid-liquid extraction to the pure enantiomer without racemization. R-(-)-ibuprofen was recovered producing overall yield of 2.4% with the purity more than 99.97%.

• 전산구조공학
• /
• 제6권3호
• /
• pp.125-137
• /
• 1993

최근 유한요소해석에서 보다 정확한 해를 위한 적응해석법에 대해 많은 연구가 이루어지고 있다. 본 논문은 요소 면적당의 오차를 균일화하여 절점을 최적의 위치로 변화시키는 r법과 오차가 큰 요소를 같은 모양의 요소로 세분시키는 h법을 혼합한 rh형 적응해석법을 사용하였다. 그 결과 같은 자유도에서 h법과 rh법의 오차감소율과 수렴속도는 거의 같에 나타났지만, rh법은 h법만 사용했을 때보다 전체 자유도 증가를 최대한 억제한 상태에서 정확한 유한요소해를 얻을 수 있었다.