• Journal of applied mathematics & informatics
• /
• v.29 no.1_2
• /
• pp.381-394
• /
• 2011

In this paper, a Naveir-Stokes equation is solved by using the Adomian's decomposition method (ADM), modified Adomian's decomposition method (MADM), variational iteration method (VIM), modified variational iteration method (MVIM), modified homotopy perturbation method (MHPM) and homotopy analysis method (HAM). The approximate solution of this equation is calculated in the form of series which its components are computed by applying a recursive relation. The existence and uniqueness of the solution and the convergence of the proposed methods are proved. A numerical example is studied to demonstrate the accuracy of the presented methods.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.10a
• /
• pp.71-72
• /
• 2016

Most of studies on PC method aim at the structural analysis and development of PC members, and studies on the construction management aspect are insufficient. Therefore, this study tries to investigate 'hallow PC column composite method(HPC composite method)' from the viewpoint of construction management and analyze the construction cost of the composite method. On the assumption that each comparative method was applied to the zone, the difference in construction cost between the two methods was analyzed. As a result, HPC composite method increased the initial investment cost because of its factor technology, but reduced transport cost, lifting cost, and installation cost through lightweight columns. This study analyzed only the difference in construction cost of HPC composite method so that it has the limitation in evaluating its economy. Therefore, to evaluate the economy of HPC composite method, it is considered to research more the construction cost of HPC composite method.

• The Journal of Pediatrics of Korean Medicine
• /
• v.28 no.2
• /
• pp.88-102
• /
• 2014

Objectives This study is to know the current usage of Ha-Taedok Method in Korean pediatrician. Methods 69 questionnaires were statistically analyzed by using PASW Statistics 18. Results 55 Korean Medicine doctors knew Ha-Taedok Method, but only 2 doctors were using Ha-Taedok Method in their practice. The doctors tend not to use Ha-Taedok Method because it was hard to get permission from the patient's caregiver. 11 Korean Medicine doctors used Ha-Taedok Method to their own children though. The pediatricians felt satisfied from the effect of Ha-Taedok Method especially because it can prevent from disease. They reported no side effect and adverse effect. Coptidis Rhizoma is a preferred herb to use along with Ha-Taedok Method. For a better result from Ha-Taedok Method, it is recommended to start within 3 days old of patient. Conclusions Ha-Taedok Method may be effective as preventive method.

• Proceedings of the KSR Conference
• /
• 2000.05a
• /
• pp.385-391
• /
• 2000

Velocity method was supposed by Parkin et al.(1985) in order to supplement previous log t and (equation omitted) method. This study was to present the method for estimating the horizontal coefficient of consolidation by using velocity method which was based on the Barren's equation. Velocity method throughly eliminated not only settlement curve which had shape with difficulty in evaluating coefficient of consolidation but also the effect of unknown intial compression, the secondary consolidation and occurrence of unknown point by using velocity instead of settlement. The purpose of this study is to investigate its application in field. Velocity method was used in obtaining horizontal coefficient of consolidation in Kyung-gi area. Horizontal coefficient of consolidation using velocity method was calculated and compared with log t method, √t method Magnan & Deroy's method, Bergado's method.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.3 no.1
• /
• pp.1-7
• /
• 2008

In this paper, a MSS-NOVO method that combines the HMM composition method with a noise reduction method is proposed for speech recognition in noisy environments. This combined method starts with noise reduction with modified spectral subtraction (MSS) to enhance the input noisy speech, then the noise and voice composition (NOVO) method is applied for making noise adapted models by using the noise in the non-utterance regions of the enhanced noisy speech. In order to evaluate the effectiveness of our proposed method, we compare MSS-NOVO method with other methods, i.e., SS-NOVO, MWF-NOVO. To set up the noisy speech for test, we add White noise to KLE 452 database with different SNRs range from 0dB to 15dB, at 5dB intervals. From the tests, MSS-NOVO method shows average improvement of 66.5% and 13.6% compared with the existing SS-NOVO method and MWF-NOVO method, respectively. Especially our proposed MSS-NOVO method shows a big improvement at low SNRs.

• Structural Engineering and Mechanics
• /
• v.55 no.4
• /
• pp.885-900
• /
• 2015

This paper introduces Romberg-Richardson's method as one of the numerical integration tools for computation of stress intensity factor in a pre-cracked specimen subjected to a complex stress field across the crack faces. Also, the computation of stress intensity factor for various stress fields using existing three methods: average stress over interval method, piecewise linear stress method, piecewise quadratic method are modified by using Richardson extrapolation method. The direct integration method is used as reference for constant and linear stress distribution across the crack faces while Gauss-Chebyshev method is used as reference for nonlinear distribution of stress across the crack faces in order to obtain the stress intensity factor. It is found that modified methods (average stress over intervals-Richardson method, piecewise linear stress-Richardson method, piecewise quadratic-Richardson method) yield more accurate results after a few numbers of iterations than those obtained using these methods in their original form. Romberg-Richardson's method is proven to be more efficient and accurate than Gauss-Chebyshev method for complex stress field.

• Journal of Environmental Science International
• /
• v.11 no.7
• /
• pp.679-686
• /
• 2002

Turbulence greatly influence on atmospheric flow field. In the atmosphere, turbulence is represented as turbulent diffusion coefficients. To estimate turbulent diffusion coefficients in previous studies, it has been used constants or 2-level method which divides surface layer and Ekman layer. In this study, it was introduced Smagorinsky method which estimates turbulent diffusion coefficient not to divide the layer but to continue in vertical direction. We simulated 3-D flow model and TKE equation applied turbulent diffusion coefficients using two methods, respectively. Then we showed the values of TKE and the condition of each term to TKE. The results of Smagorinsky method were reasonable. But the results of 2-level method were not reasonable. Therefor, it had better use Smagorinsky method to estimate turbulent diffusion coefficients. We are expected that if it is developed better TKE equation and model with study of computational method in several turbulent diffusion coefficients for reasonably turbulent diffusion, we will able to predict precise wind field and movements of air pollutants.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.3
• /
• pp.313-320
• /
• 1999

The Lane-Curvature Method(LCM) presented in this paper is a new local obstacle avoidance method for indoor mobile robots. The method combines Curvature-Velocith Method(CVM) with a new directional method called the Lane Method. The Lane Method divides the environment into lanes taking the information on obstacles and desired heading of the robot into account ; then it chooses the best lane to follow to optimize travel along a desired heading. A local heading is then calculated for entering and following the best lane, and CVM uses this heading to determine the optimal translational and rotational velocity space methods, LCM yields safe collision-free motion as well as smooth motion taking the dynamics of the robot Xavier, show the efficiency of the proposed method.

• Ocean Science Journal
• /
• v.40 no.4
• /
• pp.201-208
• /
• 2005

An accurate particle tracking method for a finite difference method model is developed using a constant acceleration method. Being assumed constant temporal and spatial gradients, the new method permits temporal-spatial variability of particle velocity. Test results in a solid rotating flow show that the new method has second-order accuracy. The performance of the new method is compared with that of other methods; the first-order Euler forward method, and the second-order Euler predictor-corrector method. The new method is the most efficient method among the three. It is more accurate and efficient than the other two.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.25 no.1
• /
• pp.133-152
• /
• 2023

The purpose of this study is to provide basic data to assist students and designers in the fashion industry by examining the trend of designing women's wear using the SCAMPER method. In the research, five SCAMPER methods for fashion design were classified based on the previous studies. From 2018 S/S to 2022 F/W, data from 3,512 photographs were collected and checked for overlapping and were then classified by SCAMPER method. Data analysis was performed using SPSS 26 for frequency analysis. As a result, the most common application of the SCAMPER method was in 2022. First, the most used SCAMPER method for design was the "modify" method, changing details into various forms. The second method was the "adapt" method in which parts of the design or details were added and connected. The third mehtod was the "magnify" method of enlarging the length of the jacket. The fourth method was the "eliminate" method, removing parts of the jacket bodice, collar, or sleeves.