• 한국안전학회지
• /
• 제23권6호
• /
• pp.76-83
• /
• 2008

In the course of increasing in human and material damage caused by fire, it is an important research field to develop clean extinguishing agent which does no harm to global environment as well as has a good extinguishing efficiency. This research is a basic step to develop a new clean extinguishing agent. In order to get a satisfactory result, we tested fire extinguishing ability using nitrogen and Novec mixtures gas which are inert gas and new clean extinguishing agent. We used Cup Burner Test made by international standard ISO-14520 regulations of gaseous extinguishing agent ability test, and the fuels used in the test are n-heptane, methanol, ethanol, iso-propanol and 1-butanol. The experimental results of flame extinguishing concentration are n-heptane 6.54%, methanol 8.47%, ethanol 6.98%, isopropanol 6.10% and butanol 6.54% by pure Novec agent. So the finding is that a new clean agent, Novec has an efficient extinguishing ability in a state of gas. Also, in a test as to mixtures gas of nitrogen and Novec, it has a good result for minimum oxygen concentration is under 16%.

• Bulletin of the Korean Chemical Society
• /
• 제32권3호
• /
• pp.829-835
• /
• 2011

A dispersive liquid-liquid microextraction based on solidification of floating organic droplet (DLLME-SFO) has been developed as a new approach for the extraction of trace copper in water and beverage samples followed by the determination with flame atomic absorption spectrometry. In the DLLME-SFO, 8-hydroxy quinoline, 1-dodecanol, and methanol were used as chelating agent, extraction solvent and dispersive solvent, respectively. The experimental parameters related to the DLLME-SFO such as the type and volume of the extraction and dispersive solvent, extraction time, sample volume, the concentration of chelating agent and salt addition were investigated and optimized. Under the optimum conditions, the enrichment factor for copper was 122. The method was linear in the range from 0.5 to $300\;ng\;mL^{-1}$ of copper in the samples with a correlation coefficient (r) of 0.9996 and a limit of detection of $0.1\;ng\;mL^{-1}$. The method was applied to the determination of copper in water and beverage samples. The recoveries for the spiked water and beverage samples at the copper concentration levels of 5.0 and $10.0\;ng\;mL^{-1}$ were in the range between 92.0% and 108.0%. The relative standard deviations (RSD) varied from 3.0% to 5.6%.

• 분석과학
• /
• 제29권5호
• /
• pp.242-247
• /
• 2016

본 연구는 물휴지 중 메탄올 정량법을 확립 및 밸리데이션을 수행하고, 확립된 시험법을 인체세정용 물휴지에 적용하여 검증하는 것을 목적으로 하였다. 물휴지 중 메탄올 정량시험은 헤드스페이스/가스크로마토그래피/불꽃이온화검출기법(HS/GC/FID)을 사용하였고, ‘의약품 등 시험방법 밸리데이션에 대한 가이드라인’에 따라 밸리데이션을 수행하였다. 확립된 시험법에서 메탄올의 정량범위는 3~40 μg/mL로 나타났으며, 상관계수(R²) 0.999 이상의 직선성과 우수한 선택성을 나타내었고, 검출한계와 정량한계는 각각 0.36와 1.17 μg/mL로 나타났다. 검출범위 내 농도별 회수율을 시험한 결과는 100.67~110.17%를 나타났다. 정밀성시험 결과 메탄올 검출량의 상대표준편차(RSD %)는 1.83%로 2 % 이내의 결과를 나타났다. 물휴지 중 메탄올 시험법을 유통 중인 물휴지 20개 제품에 적용하여 검출량을 분석한 결과 20개 제품에서 0.00017 %~ 0.00156%로 나타나 검출허용한도 기준 내 적합한 것을 확인하였다.

• 한국자동차공학회논문집
• /
• 제10권5호
• /
• pp.23-28
• /
• 2002

As the interest on the air pollution is gradually rising up at home and abroad, automotive industries have been working on the exhaust emission reduction from vehicles through a lot of approaches, which consist of new engine design, innovative aftertreatment systems, and using clean fuels. Methanol, ethanol, LNG, LPG, H2, reformulated gasoline are generally recognized as the clean fuel. Since the low price policy of government on LPG has expanded its vehicle market recently, there is concern of the exhaust emission of LPG vehicle. In this paper, we studied the value of LPG fuel as a clean fuel by comparing the results of the exhaust emission from LPG and Gasoline fueled vehicles, and discussed its limitation of LPG vehicle with mixer type as a fuel supply system. FTIR was used to understand the difference of exhaust emission components of LPG and Gasoline fueled vehicles.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1998년도 춘계 학술대회논문집
• /
• pp.128-137
• /
• 1998

In this numerical experiment, the preconditioned compressible Navier-Stokes equation is tested to analyze the laminar spray combustion. Sprayed flow field is formulated by Eulerian-Lagrangian system for the gas and liquid phases each. DSF(Deterministic Separated Flow) model was adopted for the sprays with the vortex model to describe transients of individual droplet heating. Simplified single global reaction model approximates methanol-air reaction with and without disk flame holder. The equation system is discretized by finite difference technique and time integrated by LU-SGS. Due to greatly simplified chemical reaction mechanism and the lack of experimental evidences, most of the efforts were devoted to show the applicability and robustness of preconditioned compressible flow calculation algorithm. Computation results in qualitatively reasonable combusting flow field, hence it is believed that further refinement are required to produce quantitatively accurate solutions.

• 오토저널
• /
• 제13권3호
• /
• pp.25-31
• /
• 1991

The formation process of hydrocarbon emissions was investigated in SI engine. The time- resolved concentrations of hydrocarbon emissions were measured using a high gas sampling valve and a gas chromatography. The gas was sampled at exhaust port, or the position of spark plug, or the wall of combustion chamber. The experiments were conducted using the Alpha engine of Hyundai Motor Company. The fuel used was methanol or propane. It was found that the effect of the quenching layer of combustion chamber wall on hydrocarbon emissions was not significant. The increasing rate of hydrocarbon concentration at combustion chamber wall near crevice and oil layer after flame was reached was much higher than that at the position of spark plug. The hydrocarbon concentrations at exhaust port had two peak values just after opening exhaust valve and just before closing it.

• 약학회지
• /
• 제21권3호
• /
• pp.163-166
• /
• 1977

To establish a convenient quantitative method for dammarane glycosides in Korea ginseng, the ginseng roots harvested at the cultivation areas of Ga Pyeong, Geum San and Jeung Pyeong were dried, powered, extracted with methanol and hydrolyzed. The ginseng root obtained at Gang Hwa was divided into three parts: main root, laterial root and cortex, and then these were treated in the same manner as the above. The various hydrolysates thus obtained were subjected to the analysis by an instrument coupled with flame ionization detector. The results showed that panaxadiol contents in the ginsengs of the three different cultivation sites were similar. However, the lateral root of Gang Hwa ginseng was found to contain the largest amount of panaxadiol among the three parts of ginseng. This method of the analysis for panaxadiol in ginseng was found to be one with relative rapidity and ease.

• 공업화학
• /
• 제3권1호
• /
• pp.130-137
• /
• 1992

과산화벤조일을 개시제로 하여 클로로프렌 고무에 아크릴로니트릴(AN)과 스티렌(ST)을 그라프트 공중합하였다. 합성된 그라프트 공중합체는 초산에틸/n-헥산, 아세톤/메탄올 및 디메틸포름아미드/메탄을 혼합용매를 사용하여 추출 분리하였다. 얻어진 그라프트 공중합체인 아크릴로니트릴-클로로프펜-스티렌(ACS)수지는 IR분광법으로 구조를 확인하였다. 그라프트 공중합시의 스티렌 대 아크릴로니트릴 몰비,반응온도와 시간, 개시제농도, CR농도 및 용매의 영향을 고찰한 결과 그라프팅 효율은 [ST]/[AN] 몰비와 반응시간, 개시제 농도와 CR농도에 따라 증가하였다. 그라프트 공중합에서 클로도프렌의 농도는 9.6wt%, 단량체의 상대적 몰비, [ST]/[AN]=1.5, 반응시간은 40시간, 반응온도는 $70^{\circ}C$가 최적 반응조건이었다. 아울러 최적반응조건으로부터 합성되어진 그라프트 공중합체의 열적성질 난연성 내후성 및 morphology도 측정조사하였다. 그 결과 난연성과 내후성 및 열적 안정성이 기존의 ABS나 AES보다 개선되었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.115-115
• /
• 2011

Biodiesel (BD) was made from animal-fats reacting with methanol and potassium hydroxide in the laboratory. The biodiesel made in the laboratory was sent to K-petro, the government agency, to inspect the quality of animal-fats biodiesel, of which generally the quality was acceptable for heating oil for agricultural hot air heater. Kinematic viscosity and calorific values of the biodiesels were measured. BD20(K), kerosene based biodiesel, showed 18cSt at $-20^{\circ}C$. It seems that BD100 can not be suitable for heating fuel under some temperature. As BD content increased calorific value decreased, up to 40,000J/g for 100% BD, while light oil calorific value was 45,567J/g, showing difference of 5,567J/g, about 12% difference. Several different fuels, BD20, BD50, BD100 and light oil, were prepared and tested for fuel combustion qualities for agricultural hot air heater and their combustion performances were compared and analyzed. Flame dimensions of biodiesels and light oil were almost same shape at the same combustion condition in the burner of the hot air heater. Generally $CO_2$ amounts of BDs are greater than light oil. But,the differences are so small that it is hard to tell there was significant difference existed between the BDs combustion and light oil.

• 한국축산식품학회지
• /
• 제28권2호
• /
• pp.240-245
• /
• 2008

본 연구에서는 식품 내에 존재하는 트랜스지방산 함량에 대한 기초 자료를 수집하기 위하여 서울 지역에서 수거한 레토르트식품류 2종, 분유류 6종, 비스킷류 7종 피자류 3종을 선택하여 총 4종류의 18종의 시료를 분석하였다. 레토르트식품류 2종, 분유류 6종, 비스킷류 1종은 chloroform-methanol(CM) 추출법에 의하여 조지방을 추출하였으며 비스킷류 6종, 피자류 3종은 chloroform-methanol(CM) 추출법과 acid digestion 추출법을 각각 이용하여 조지방을 추출한 후 gas chromatography(GC)에 의해 트랜스지방산 함량을 분석하였다. 레토르트식품류의 총 지방 중 트랜스지방산 함량은 1-2.8%이며 분유류의 트랜스지방산 함량은 0.4-2.4%로서 제품의 브랜드와 제조회사에 따라 차이가 많이 났다. 비스킷류의 트랜스지방산 함량은 0-2.95%로서 제품 간 가장 많은 차이를 나타내었으며 이는 첨가물의 종류에 따라 달라지는 것으로 사료된다. 피자류에서는 2.8-3.45%의 높은 트랜스지방산 함유율을 나타내었다.