• 제목/요약/키워드: Methanesulfonic acid

검색결과 21건 처리시간 0.029초

Effect of Phenol in the Liquefaction of Pine Bark by Ethylene Carbonate-Methanesulfonic Acid

  • Mun, Sung Phil;Hassan, El-Barbary M.
    • Journal of the Korean Wood Science and Technology
    • /
    • 제30권3호
    • /
    • pp.66-74
    • /
    • 2002
  • The effects of phenol during ethylene carbonate (EC) liquefaction of pine bark in the presence of methanesulfonic acid (MSA) as a catalyst were investigated. Liquefaction of pine bark using EC in the presence of acid catalyst was very difficult in comparison to wood. Mixing ethylene glycol (EG) with EC improved the liquefaction process, but the maximum liquefaction yield did not exceed 78%. Mixing 20~30% phenol with EC was very effective for the liquefaction and the residue was remarkably decreased. More than 95% of liquefaction was achieved when about 30% phenol was mixed with EC. The reaction conditions, such as catalyst concentration, liquefaction temperature and time, type of catalyst and liquefying agent, had a great influence on the liquefaction process. The results of the average molecular weights and the amount of combined phenols for the liquefied products indicated that sulfuric acid (SA) causes high condensation reactions compared to MSA.

침출제로 황산과 메탄술폰산의 화학적 반응성 비교 (Comparison of the Chemical Reactivity between Sulfuric and Methanesulfonic Acids as a Leaching Agent)

  • ;문현승;이만승
    • 자원리싸이클링
    • /
    • 제30권3호
    • /
    • pp.41-46
    • /
    • 2021
  • 메탄술폰산은 우수한 물리화학적 특성을 지니고 있어 금속의 침출에 효과적이다. 분자구조 및 코발트와 니켈 금속의 침출자료를 이용하여 메탄술폰산과 황산의 화학적 반응성을 비교하였다. 유발과 공명효과는 두 산의 반응성에 큰 영향을 미쳤다. 동일한 침출조건에서 코발트와 니켈의 침출률은 메탄술폰산보다 황산에서 높았다. 메탄술폰산의 강한 산도와 금속염의 높은 용해도를 고려하면 메탄술폰산을 금속회수시 침출제로 이용하는 것이 가능하다.

소나무 수피의 페놀액화에 대한 다양한 산 촉매의 효과 (Effect of Various Types of Acid Catalysts on Phenol Liquefaction of Pinus densiflora Bark)

  • 문성필;로경란;이종문
    • 임산에너지
    • /
    • 제21권3호
    • /
    • pp.1-9
    • /
    • 2002
  • 소나무 수피의 페놀 액화시 다양한 종류의 산 촉매를 도입하여 그 효과를 검토하였다. 소나무 수피의 페놀 액화시 무기산 촉매로서 염산이 가장 효과적이었으나, 90%이상의 액화를 위하여 적어도 11 mmol이상의 염산의 첨가가 필요하였다. 사용된 카르본산류의 경우 triflouroacetic acid (TFA)가 액화에 가장 효과적이었으나 80%이상의 액화는 어려웠다. 그러나 유기설폰산 촉매류, 즉, p-toluenesulfonic acid (PTSA) 및 methanesulfonic acid (MSA)의 경우 소량의 첨가로도 낮은 액화온도에서 높은 액화율을 얻을 수 있었다. 특히 PTSA는 140℃의 낮은 액화 온도 조건에서도 92%의 액화율을 나타내어 수피 페놀액화 시 매우 효과적인 촉매로 판명되었었다.

  • PDF

Valorization of galactose into levulinic acid via acid catalysis

  • Kim, Hyo Seon;Jeong, Gwi-Taek
    • Korean Journal of Chemical Engineering
    • /
    • 제35권11호
    • /
    • pp.2232-2240
    • /
    • 2018
  • We applied methanesulfonic acid (MSA) as a green catalyst to produce levulinic acid (LA) from monomeric sugars. To optimize reaction factors and assess the effect of reciprocal interactions, a statistical experimental design was applied. Optimized result of 40.7% LA yield was obtained under the following conditions: 60 g/L galactose, 0.4 M MSA at $188^{\circ}C$ for 26.7 min. On the other hand, 66.1% LA yield was achieved under 60 g/L fructose and 0.4 M MSA at $188^{\circ}C$ for 36 min conditions. For the effect of combined severity factor on the LA yield from galactose, the LA yield showed a peaked pattern, which was linearly increased until a CSF 3.2 and then diminished with a high CSF. Moreover, it was closely fitted to a non-linear Gaussian peak pattern with a high regression value of 0.989. These results suggest that MSA and galactose, derived from marine red macro-algae, can potentially be applied for the conversion into platform chemicals.

Gasoline Desulfurization by Catalytic Alkylation over Methanesulfonic Acid

  • Wu, Xiaolin;Bai, Yunpeng;Tian, Ying;Meng, Xuan;Shi, Li
    • Bulletin of the Korean Chemical Society
    • /
    • 제34권10호
    • /
    • pp.3055-3058
    • /
    • 2013
  • Methanesulfonic acid (MSA) was used as catalyst to remove trace organic sulfur (thiophene) from Fluid Catalytic Cracking gasoline (FCC) via alkylation with olefins. The reactions were conducted in Erlenmeyer flask equipped with a water-bath under atmospheric pressure. The influence of the temperature, the reaction time, and the mass ration of MSA were investigated. After a 60 min reaction time at 343 K, the thiophene conversion of 98.7% was obtained with a mass ration of MSA to oil of 10%. The catalyst was reused without a reactivation treatment, and the thiophene conversion reached 92.9% at the third time. The method represents an environmentally benign route to desulfur, because MSA could easily be separated from the reaction mixture via decantation and it could be reused.

산성용액에서 아쿠오옥소몰리브덴 (V) 이온의 이합화 반응 (I). 이합체 착물의 두다리인 히드록소의 탈수소화 반응 (Dimerization of Aquooxomolybdenum (V) ion in Acid Media (I). Dehydrogenation of Bridging Hydroxide of $Mo_2O_4(OH)_{2(aq)}^{4+}$)

  • 김창수;김찬우;권창용;이문평
    • 대한화학회지
    • /
    • 제29권5호
    • /
    • pp.510-515
    • /
    • 1985
  • 진한 메탄설폰산(약10M)에서 초록색의 $MoO_{(aq)}^{3+}$는 진한 초록색의 이합체인$Mo_2O_2(OH)_{2(aq)}^{4+}$를 생성한다. 또한 이러한 진한 초록색은 15-16M의 메탄설폰산에서 존재하는 $MoO_{(aq)}^{3+}$용액에 물을 가하면 나타나며 15M의 메탄설폰산에서 단위체의 몰흡광계수는 415nm에서 약 20이다. 속도 상수는 이 실험조건하에서 아쿠오몰리브덴(V)와 수소이온농도에 의존하지 않는다. $Mo_2O_2(OH)_{2(aq)}^{4+}$의 수산화이온은 HPTS 약 6M, $CH_3SO_3H$는 10M이하에서 탈수소화반응이 일어난다. 마지막 생성물의 말단산소와 다리산소의 구조는 (*image) 단위를 가진 것으로 확인되었다.

  • PDF

NCM Black Mass 황산침출 개선을 위한 대체침출제 메탄술폰산의 적용가능성 연구 (Feasibility Study of Methanesulfonic Acid (MSA), an Alternative Lixiviant to Improve Conventional Sulfuric Acid Leaching of NCM Black Mass)

  • 정혜원;이제승;송강훈;박민서;안준모
    • 자원리싸이클링
    • /
    • 제33권1호
    • /
    • pp.58-68
    • /
    • 2024
  • 핵심광물인 니켈, 코발트, 리튬은 NCM계 리튬이온배터리(이하 LIB)의 양극소재로 알려져 있다. 탄소중립 기조에 따라 전기자동차의 보급량 증가로 핵심광물 수요도 증가할 것으로 예상된다. 하지만, LIB용 핵심광물 Li, Co, Ni의 수요대비 공급 부족으로 인해, 폐리튬이온배터리(EOL LIB)의 리싸이클링 수요가 증가할 것으로 예상된다. EOL LIB(폐 LIB) 재활용은 유해화학물질 무기산 침출제인 염산(HCl), 질산(HNO3), 황산(H2SO4)을 침출공정에 적용하여 재활용한다. 본 연구에서는 친환경 대체침출제 메탄술폰산(이하 MSA)의 적용 가능성을 검토하였다. 또한, 침출제 농도, 환원제 농도, 침출시간, 광액농도(P/D), 온도 등의 침출인자가 NCM Black mass 침출에 미치는 영향을 연구하였다. 침출실험 결과, 침출제와 환원제 농도, 침출시간, 침출온도가 증가함에 따라 목적금속 Ni, Li, Co, Mn의 침출률이 향상됨을 확인하였고, 금속의 최대 침출률은 80℃에서 99% 이상으로 나타났다. 또한, MSA는 NCM Black mass 대상 침출에 적용하여 Ni, Li, Co, Mn을 회수할 수 있음을 확인하였다.

Rate-acceleration of TEMPO-mediated Polymerization of Styrene in the Presence of Various Acids

  • Hong, Chang-Kook;Jang, Heang-Sin;Hong, Sang-Hyun;Shim, Sang-Eun
    • Macromolecular Research
    • /
    • 제17권1호
    • /
    • pp.14-18
    • /
    • 2009
  • The acceleration effect of various organic acids, such as methanesulfonic acid (MSA), ethanesulfonic acid (ESA), 4,4'-sulfonyldibenzoic acid (SDA), diphenylacetic acid (DPAA), and $\rho$-toluenesulfonic acid (TSA), on the rate of styrene bulk polymerization with 2,2,6,6-tetramethylpiperidinyloxy (TEMPO) and benzoyl peroxide (BPO) was investigated. The addition of organic acids significantly accelerated the rate. Among these organic acids, DPAA showed an efficient rate-accelerating effect with living nature of polymerization. When DPAA was used as a rate-accelerating additive for TEMPO-mediated living free radical polymerization (LFRP), the rate of polymerization was dramatically enhanced, the linearity of reaction kinetics was successfully maintained, and the polydispersity was effectively controlled.