• Korean Journal of Soil Science and Fertilizer
• /
• v.20 no.4
• /
• pp.333-336
• /
• 1987

A liquid waste from methane fermantation was applied on Maize field to determine its effect and optimum application rate on the plant growth. A basal application of liquid waste increased a considerable amount of soil water resulting in an increase of germination. Fresh and dry yields of maize plant increased as the liquid waste application rate increased and same as plant growth. Nitrogen and phosphorus components in plant and soil showed the same tendency as the yields. The result indicates that the liquid waste is potentially useful source for a fertilizer and irrigation water.

• Korean Chemical Engineering Research
• /
• v.59 no.2
• /
• pp.269-275
• /
• 2021

In this study, ordered mesoporous silica-supported Ni catalysts were prepared for catalytic partial oxidation of methane (CPOM) by using electroless nickel plating method. Unlike conventionally impregnated catalysts, the electrolessly-plated nickel catalyst showed that nickel was highly dispersed and formed stably on silica-supported surface. It was verified by TEM-EDS analysis. During the activity tests, the electrolessly-plated nickel was barely sintered and the amount of carbon deposition was very small. Consequently, the catalyst was far less deactivated, while the sintering was significantly observed in the cases of the catalysts prepared by the conventional impregnation method. Regarding the palladium-promoted catalysts, the reducibility of nickel was increased, and the reaction performances were enhanced in terms of CH4 conversion and H2/CO ratio of produced syngas.

• Animal Bioscience
• /
• v.37 no.3
• /
• pp.481-491
• /
• 2024

Objective: This study determined fermentation characteristics of commonly used feedstuffs, especially tropical roughages, for dairy cattle in Southeast Asia. This information is considered relevant in the context of the observed low milk fat content and milk production in Southeast Asia countries. Methods: A total of 29 feedstuffs commonly used for dairy cattle in Vietnam and Thailand were chemically analysed and subjected to an in vitro gas production (GP) test. For 72 h, GP was continuously recorded with fully automated equipment and methane (CH₄) was measured at 0, 3, 6, 9, 12, 24, 30, 36, 48, 60, and 72 h of incubation. A triphasic, nonlinear, regression procedure was applied to analyse GP profiles while a monophasic model was used to obtain kinetics related to CH₄ production. Results: King grass and VA06 showed a high asymptotic GP related to the soluble- and non-soluble fractions (i.e. A1 and A2, respectively) and had the highest acetate to propionate ratio in the incubation fluid. The proportion of CH₄ produced (% of GP at 72 h) was found to be not different (p>0.05) between the various grasses. Among the selected preserved roughages (n = 6) and whole crops (n = 4), sorghum was found to produce the greatest amount of gas in combination with a relatively low CH₄ production. Conclusion: Grasses belonging to the genus Pennisetum, and whole crop sorghum can be considered as suitable ingredients to formulate dairy rations to enhance milk fat content in Vietnam/Thailand.

• Journal of the Korean Institute of Gas
• /
• v.28 no.1
• /
• pp.53-58
• /
• 2024

Due to the development of industry and improvement of living standards, the amount of natural gas used in the world is constantly increasing, and related industrial facilities such as power plants, storage facilities, and supply pipelines are constantly increasing. Natural gas is a convenient and clean fuel that does not pollute the environment, but in the event of an accident due to leakage, it can cause human casualties, large-scale property damage, and negative effects on the global warming effect. In addition to the severe penalties under the Severe Disaster Punishment Act, it is necessary to ensure safety. Therefore, by applying the principle of laser-based absorption spectroscopy, we developed a long-range portable methane leakage gas detection system that can detect the concentration of methane leaking from a distance of up to 30 meters and verified its effectiveness.

• Transactions of the Korean hydrogen and new energy society
• /
• v.29 no.1
• /
• pp.1-10
• /
• 2018

The amount of biogas increases as the amount of organic waste increases. Recently, biogas from organic waste have been made much efforts to utilize as a energy. In particular, the concentration of $CH_4$ and $CO_2$ generated from sewage sludge and livestock manure treatment are 60-70% and 30-35%, and $CH_4$ and $CO_2$ generated from food wastes are 60-80% and 20-40%. In case of landfill gas, $CH_4$ and $CO_2$ have a concentration of 40-60% and 40-60% respectively. Therefore, in order to use the biogas more widely, it is necessary to convert the biogas to methanol, LNG or DME. In this study, experiments were conducted to produce hydrogen and carbon monoxide through various biogas reforming reactions on $Ni/Ce-ZrO_2/Al2O3$ catalysts. The experiment of synthetic gas synthesis was carried out on a wide concentrations of methane and carbon dioxide, which were the major constituents of biogas from various organic wastes. The effect of $(O_2+CO_2)/CH_4$ (=R') on the yields of hydrogen and carbon monoxide, the conversion rate of methane and carbon dioxide was investigated. Also simulation for syngas synthesis on the $CO_2$ reforming of $CH_4$ was computed by employing total Gibbs free energy minimization method using PRO/II simulator, and compared with the experimental results on wet and dry reforming reaction of biogas.

• New & Renewable Energy
• /
• v.18 no.4
• /
• pp.1-11
• /
• 2022

Landfill gas (LFG) generation characteristics in a construction waste landfill zone (block E) and mixed landfill zone (block A) were analyzed. During the period from October 2018 to April 2022, a total of 936×10³ and 1,001×10³ tons of waste were disposed in block E and block A, respectively. Out of this, 27.1% and 55.6% were biodegradable waste in block E and block A, respectively. The landfill masses of the two blocks were converted to be comparable. Then, the biodegradable waste and organic carbon were estimated by element analysis, biodegradable carbon by biochemical methane potential experiment (DC), and sulfate ion by acid decomposition. Results showed that biodegradable waste, organic carbon, biodegradable carbon, and sulfate ions in block A were 2.1, 1.6, 5.2, and 0.4 times greater than those in block E, respectively. The amount of LFG generated by block A was 4.8 times greater than that by block E. The average concentrations of methane (CH₄) were 60.8% and 60.9% in block E and block A, respectively, which were unrelated to the nature of disposed waste. The average concentrations of hydrogen sulfide (H₂S) were significantly high in block E (4,489 ppm) and block A (8,478 ppm). As the DC/SO₄^2- of block E and block A were 0.35 and 4.56, respectively, increase in DC/SO₄^2- caused increase in not only the total amount but also the concentration of H₂S generated.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6B
• /
• pp.683-687
• /
• 2006

This research investigated the effect of aeration pretreatment for anaerobic seed sludge on hydrogen production. Aeration time for anaerobic sludge was maintained at 0, 1, 3, 6, 12, and 24 hours in batch tests. Two continuous anaerobic reactors (aerated and non-aerated) were also operated. All experiments were conducted at $35^{\circ}C$ using mineral salts-glucose (20 g/l) medium. Methane production decreased with the increase in aeration time. Aeration for 6 hours was determined as an optimum from the amount of hydrogen produced. Hydrogen was steadily produced in the continuous reactor seeded with aerated sludge while no methane production was observed. However, small amount of hydrogen was produced in the non-aerated reactor for short period of time from the start even though short HRT (2 days) and low pH (5.5) were maintained.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.17 no.3
• /
• pp.82-90
• /
• 2009

Disintegration of sewage sludge (SS) was investigated by batch experiments using mechanical pre-treatment. Mechanical disintegration of SS increased the amount of soluble chemical oxygen demand (SCOD), protein and carbohydrate due to the break-up of cell walls. The mechanical disintegration incorporated with alkaline pre-treatment demonstrated higher amount of SCOD compared with mechanical one only. In terms of anaerobic biodegradability, mechanical pretreatment enhanced the anaerobic biodegradation of SS, leading to the methane production improvement. The improvement in BMP for SS treated with mechanical and alkaline-mechanical pre-treatments were 24.1% and 44.5%, respectively. This result suggested that disintegration of SS was effective for improving anaerobic biodegradability.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.262-262
• /
• 2010

To investigate the effect of the amount of hydrogen on CVD grown-graphene, the flow rate of hydrogen was changed, while other process parameters were kept constant during CVD synthesis. Substrate which consists of 300nm-nickel/$SiO_2$/Si substrate, and methane gas mixed with hydrogen and argon were used for CVD growth. Graphene was synthesized at $950^{\circ}C$. The thickness and the defect of graphene were analyzed using raman spectroscopy. The synthesized graphene shows non-uniform and more defective below a certain amount of hydrogen.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.80-83
• /
• 2007

In order to characterize the catalytically active sites on carbon black, acetylene chemisorption had been examined recently at 773 and 873 K by using a pulse technique. As the inject ion was repeated at 773 K, the adsorbed amount gradually decreased and eventually the adsorption did not occur any more. At 873 K a constant amount of $C_2H_2$ was consumed repeatedly after several injections. Good linear relationships were obtained between the methane decomposition rate at 1123 or 1173 K and the cumulative acetylene adsorption at 773 K or the constant acetylene consumption at 873 K. Reasonable models for the associative acetylene chemisorption at 773 K and the constant acetylene consumption at 873 K on the armchair face at the edges of graphene layers were proposed. The constant consumpt ion may be explained by the "$C_2H_2$-addition-hydrogen- abstract ion (CAHA)" mechanism.