• 한국주조공학회지
• /
• 제4권4호
• /
• pp.20-29
• /
• 1984

It is very important to obtain gray and ductile cast irons with completely pearlitic structure by addition more economical alloying elements. In this study, 9 melts of gray iron and 5 melts of Mg-treated ductile cast iron were made according to Sb content (0-0.08% Sb). Each melt were casted to ${\phi}20mm$ test bars in sand mold under the same condition and inspected microstructure, mechanical and thermal properties. The results obtained from this study are as follows: 1. It is confirmed that Sb should be an economical, simple and useful additive for avoiding ferrite in gray and even in ductile cast irons. 2. For gray cast iron, the recommended ladle addition of metallic Sb amounts to 0.05%. At these levels, Sb has no detrimental influence on the mechanical properties of gray cast irons, which are normally modified according to their pearlite content without increasing the chilling tendency. 3. Despite its adverse influence on graphite shape in ductile iron, Sb can be used as a pearlite stabilizing alloying element even in the case of Mg - treated iron. The quantity to be added does not exceed 0.04% in the case of thinwalled castings. 4. The nodule count is increased very much and the shape of graphite particles become remarkably spheroidal. The matrix may be fully pearlitized, except for thin - walled castings, because the high nodule count results inevitably in some ferrite. 5. The $Ac_1$ and pearlite decomposition temperature are rised in accordance with increasing of additive Sb amount.

• 한국주조공학회지
• /
• 제23권3호
• /
• pp.137-146
• /
• 2003

The main purpose of this study is to investigate the effects of process parameter on alpha-case formation of Ti and TiAl castings. The previous studies showed that the molten titanium is excessively reactive to the refractory oxide mold, resulting in alpha-caes of the titanium castings regardless of composition of titanium alloys. However, the behavior of the alpha-case formation of TiAl alloy is not consistent with conventional titanium alloy. In order to investigate the alpha-case formation of Ti and TiAl castings with process parameter, especially the associated factors of investment mold such as mold material, binder and mold preheating temperature. An attempt has been made to characterize the alpha-case of titanium casting by using optical microscope, EDS, XRD, EMPA and hardness profiles. The formation of the alpha-case on the surface of pure titanium during investment casting was rather by that of solid solution with metallic element from mold material. The required mold strength was obtained with $CaZrO_3$ because of the possibility of using water soluble binder. However, the separation phenomenon between facing and back-up mold materials should be considered. The interfacial reaction of TiAl alloy showed different behavior from that of pure titanium and $Al_2O_3$ was best mold materials. The effect of binder as well as mold material on the formation of alpha-case was significant.

• 대한치과보철학회지
• /
• 제36권5호
• /
• pp.701-720
• /
• 1998

Research advances in dental implantology have led to the development of several different types of materials and it is anticipated that continued research will lead to advanced dental implant materials. Currently used pure titanium has relatively low hardness and strength which may limit its ability to resist functional loads as a dental implant. Ti-6Al-4V also has potential problems such as corrosion resistance. osseointegration properties and neurologic disorder due to aluminium and vanadium, known as highly toxic elements, contained in Ti-6Al-4V. Newly developed titanium based alloys(Ti-20Zr-3Nb-3Ta-0.2Pd-1In, Ti-20Zr-3Nb-3Ta-0.2Pd) which do not contain toxic metallic components were designed by the Korea Institute of Science and Technology (KIST) with alloy design techniques using Zr, Nb, Ta, Pd, and In which are known as non-toxic elements. Biocompatibility and osseointegration properties of these newly designed alloys were evaluated after implantation in rabbit femur for 3 months. The conclusions were as follows : 1. Mechanical properties of the new designed Ti based alloys(Ti-20Zr-3Nb-3Ta-0.2Pd-1In, Ti-20Zr-3Nb-3Ta-0.2Pd) demonstrated close hardness and tensile strength values to Ti-6Al-4V. 2. New desinged experimental alloys showed stable corrosion resistance similar to the pure Ti but better than Ti-6Al-4V. However, the corrosion rate was higher for the new alloys. 3. Cell culture test showed that the new alloys have similar cell response compared with pure Ti and Ti-6Al-4V with no cell adverse reaction. 4. New designed alloys showed similar bone-metal contact ratio and osseointegration properties compared to pure Ti and Ti-6Al-4V after 3 months implantation in rabbit femur. 5. Four different surface treatments of the metals did not show any statistical difference of the cell growth and bone-metal contact ratio.

• 한국항공우주학회지
• /
• 제31권5호
• /
• pp.110-116
• /
• 2003

항공기 기술의 발전에 따라 기체 경량화는 성능에 큰 영향을 미치는 요소로 대두되었으며, 비행 중 도는 지상 계류 중 우박에 의한 표면 손상 문제가 중요한 설계 인자로 부각되었다. 우박은 항공기 운용 안정성 및 비용 면에서 심각한 피해를 입히는 경우가 많다. 대부분의 군용, 상용 항공기의 외부 구조 특히 레이돔, 캐노피 등 전방 부분과 주익, 미익의 앞전 부분은 쉽게 손상을 입는 부분임에도 불구하고, 이에 관한 연구는 활발하지 못했다. 이에 관한 일부 연구도 복합재에 집중되어 왔으며, 금속재에 관한 연구는 미미한 편이다. 본 연구에서는 상용 비선형 동적 수치 해석 코드인 LS-DYNA를 이용하여 ice 재질의 충돌 거동과 박판 알루미늄의 충돌 영향성을 분석하였다. 해석 방법은 유사 실험 자료를 이용하여 검증하였고, 주요 결과를 도표화하여 활용 및 응용 방안을 모색하였다.

• 공업화학
• /
• 제20권2호
• /
• pp.165-171
• /
• 2009

1%, 2%, 8% 및 16%의 가교도를 가진 스타이렌(제4류 위험물 중 제2석유류) 디비닐벤젠 공중합체에 1-aza-15-crown-5 거대고리 리간드를 치환반응으로 결합시켜 수지를 합성하였으며, 이들 수지의 특성을 염소 함량, 원소 분석, 열 중량 분석, 비표면적(BET), 그리고 적외선 분광법으로 확인하였다. 수지 흡착제에 대한 금속 이온의 흡착에 미치는 pH, 시간, 수지의 가교도 그리고 용매의 유전상수에 따른 영향들을 조사한 결과 금속 이온들은 pH 3 이상에서 큰 흡착율을 보였으며, 금속 이온들의 흡착 평형은 2 h 정도였다. 한편, 에탄올 용매에서 수지에 대한 흡착 선택성은 우라늄$(UO_2^{2+})$ > 납$(Pb^{2+})$ > 크롬$(Cr^{3+})$ 이온이었고, 금속 이온의 흡착력은 1%, 2%, 8% 및 16%의 가교도 순이며, 용매의 유전상수 크기에 반비례하였다.

• 한국의류학회지
• /
• 제32권5호
• /
• pp.741-752
• /
• 2008

The purposes of this study are to review the status of dress material in the contemporary fashion design by examining the intertextuality of many materials other than textiles used in the contemporary fashion and to show that the development of new fashion materials is a factor for designing competitiveness. The results of this study are summarized as follows: First, foods and natural objects are used as fashion materials to reveal natural beauty, and at the same time new formative elements are expressed in combinations of life and fashion. Second, common paper and luxurious jewelry are presented as a formative element symbolic of an aspect of the contemporary society or embodied in elaborate handicraft techniques. Those materials boost the luxuriousness of costume and create a strong futuristic image according to how they are expressed. Third, plastics available for a variety of objects in different shapes and colors offer such formative features that could be shaped with textiles, as high-end technology is introduced to fashion. Fourth, metallic materials have added freedom to design formality due to their qualities of convergence and displacement and by the introduction of brand-new technology, suggesting a new future for the fashion industry. Fifth, using a variety of anti-fashion materials including semiconductor chips, mirrors, vinyl, wires, and rubber makes a change in the existing points of view regarding the formality of things and helps create a special aesthetic effect in a visual respect to develop a strong intertextuality of materials.

• 한국재료학회지
• /
• 제23권11호
• /
• pp.649-654
• /
• 2013

The effect of interstitial elements on the ductile-brittle transition behavior of austenitic Fe-18Cr-10Mn-2Ni alloys with different nitrogen and carbon contents was investigated in this study. All the alloys exhibited ductile-brittle transition behavior because of unusual low-temperature brittle fracture, even though they have a faced-centered cubic structure. With the same interstitial content, the combined addition of nitrogen and carbon, compared to the sole addition of nitrogen, improved the low-temperature toughness and thus decreased the ductile-brittle transition temperature (DBTT) because this combined addition effectively enhances the metallic component of the interatomic bonds and is accompanied by good plasticity and toughness due to the increased free electron concentration. The increase in carbon content or of the carbon-to-nitrogen ratio, however, could increase the DBTT since either of these causes the occurrence of intergranular fracture that lead to the deterioration of the toughness at low temperatures. The secondary ion mass spectroscopy analysis results for the observation of carbon and nitrogen distributions confirms that the carbon and nitrogen atoms were significantly segregated to the austenite grain boundaries and then caused grain boundary embrittlement. In order to successfully develop austenitic Fe-Cr-Mn alloys for low-temperature application, therefore, more systematic study is required to determine the optimum content and ratio of carbon and nitrogen in terms of free electron concentration and grain boundary embrittlement.

• Advances in Traditional Medicine
• /
• 제10권3호
• /
• pp.141-149
• /
• 2010

A concern of safety issue for traditional herbal medicine is the possibility of some herbs containing heavy metals responsible for several cases of metal poisoning. In our previous study, the physiological levels of heavy metals, such as Cd, Cu, Hg and Pb, were examined to evaluate a potential risk in patients taking herbal medicine. In this study, the levels of 12 heavy metals, including non-metallic element, Se, were analyzed in hair and compared to the results from the previous study. In the previous study, the levels of Cd, Cu, Hg and Pb in hair showed a significantly lower odds ratio than 1. In this study, however, all metals did not show any significant odds ratio higher or lower than 1 even if 5 of 12 metals showed lower odds ratio than 1. In addition, the levels of metal concentrations, especially for Cu, Fe, Pb and Zn, exceeding the WHO reference values were observed in hair. However, any evidence for metal accumulation in hair caused by taking herbal medicines for long duration was not observed in analysis of multiple regression and odds ratio from case-control study. This result would show another possibility for a role of herbs as a non-enzymatic chelator inhibiting the gastrointestinal absorption of heavy metals.

• 문화기술의 융합
• /
• 제6권2호
• /
• pp.529-534
• /
• 2020

인류 문명의 발전은 산업화에 따른 도시의 발전과 운송 기술의 진화와 맥을 같이한다. 지금까지의 도시 발전은 수송비 절감과 한정된 중심업무 지구로서의 토지 이용 요구에 따라 진행되어왔다. 도시 인구 밀집도의 지속적인 증가는 지가상승, 교통 혼잡, 빈부격차, 공해발생 등과 같이 사회·경제적으로 많은 문제를 일으켜 왔고 현재의 도시 생태 시스템으로는 전반적인 해결에 어려움이 있다. 그러나 문제의 해결을 위한 실마리는 바로 도시생태계 내에서 찾을 수 있다. 서울 심야버스 운행 노선의 설계는 바로 심야의 도시 내 이동 인구의 흐름을 정보통신 기술을 이용해 분석하여 얻은 결과이다. 이렇듯 도시 문제의 해결은 도시 생태계의 분석에서 출발하는 것이 타당하다. 문제의 원인을 알았다면 시민의 삶의 질을 높이기 위해 빅데이터 플랫폼 구축이 필요하고 이를 통한 해결이 가능하다. 이 플랫폼의 중심에는 정보통신 기술의 기반 하에 도시의 구성 요소와 연결되어 실시간 수집, 분석 및 적용되는 빅데이터가 자리 잡고 있어야한다. 본 연구를 통해 지속 가능한 스마트 시티를 위한 빅데이터 플랫폼 구축과 적용 방안에 대하여 고찰한다.

• 대한조선학회논문집
• /
• 제36권4호
• /
• pp.95-104
• /
• 1999

강 구조물의 대형화에 기인하여 대형 해양구조물, 선박, 교량 및 고층 구조물에서의 극후판의 사용이 지속적으로 증가하고 있으며, 이런 경향은 앞으로도 계속될 것으로 생각된다. 그러나, 극후판을 사용하여 구조물을 시공할 때, 층상균열의 발생이 보고되고 있으며 이것은 극후판의 두께방향 중심부를 따라 분포하는 황, 인등의 불순 개재물 및 용접에 기인하여 발생하는 구속 잔류응력에 의하여 발생하는 것으로 알려져 있다. 연속 주조공법에 의하여 제조되는 극후판의 제조공정의 특성상, 층상균열의 발생은 회피하기가 현실적으로 어려우며, 따라서, 본 논문에서는 강구조물의 층상균열 발생의 감소 방안으로서, 금속학적 측면보다는 용접강도 측면에서 유한요소법에 기초한 전산 프로그램을 사용하여 최적 개선부형상 및 용접순서를 선정하고자 한다.