• Journal of Electrical Engineering and Technology
• /
• 제5권4호
• /
• pp.631-636
• /
• 2010

Gas-insulated transmission lines (GITL) are valued as technological solutions in hydro-power stations due to their enormous power handling capabilities. The performance of GITL is a function of the size of metallic particles inside the gas-insulated chamber. Electrostatic field (E-field) enhancement is a common phenomenon in gas-insulated lines due to these metallic particles. In this study, the E-field enhancement factor is calculated by considering metallic particles at various locations in the gas-insulated line/bus section, such as high-tension (HT) conductor, high-voltage shields, support insulator, and inner surface of grounded enclosure. For this purpose, a two-dimensional model based on finite element (FE) method is developed. The length of the metallic particle is in the range of 1 to 10 mm while the diameter is between 1 to 3 mm. E-field enhancement is also computed for various particle configurations of the gas-insulated system, with focus on dielectric coating made of epoxy on HT conductor and inner surface of grounded enclosure.

• Journal of electromagnetic engineering and science
• /
• 제13권2호
• /
• pp.104-112
• /
• 2013

A novel miniaturized artificial magnetic conductor (AMC) is proposed for dual-band operation. An AMC unit cell that employs four slots in the metallic patch is used to achieve miniaturization as well as easy control of the second/first resonant frequency ratio, which can be varied from 1.5 to 3.26 by simply changing the slot shape for a given metallic patch size. A dual-band antenna composed of a wideband monopole suspended over the proposed AMC surface is designed and tested to validate this approach. The measurements result in a satisfactory and good matching condition for the dual-band antenna.

• 한국초전도ㆍ저온공학회논문지
• /
• 제24권1호
• /
• pp.1-7
• /
• 2022

So far, large-scale scientific devices such as nuclear fusion tokamaks and high energy circular accelerators were constructed using high-current conductors made of metallic superconducting wires. Recently, as REBCO superconducting wires usable in high magnetic fields have been developed by several companies, researchesto apply high current cable type REBCO conductors to next-generation large superconducting magnets were also started. High critical currents of several kA or more in high magnetic fields have been successfully demonstrated on test samples of REBCO cable conductors by several research groups. In this review article, the main features and properties of the representative high current REBCO conductors such as CORC(Conductor On Round Core), TSTC(Twisted Stacked-Tape Cable) and RACC(Roebel-Assembled Coated Conductor), which are currently being developed at abroad are briefly introduced. Research activities of high-current density REBCO MHOS(Multi HTS layers on One Substrate) conductor at KERI, whose structure is different from other cable type REBCO conductors are also shortly introduced.

• 한국레이저가공학회지
• /
• 제3권2호
• /
• pp.25-33
• /
• 2000

One of perspective direction of microfabrication is direct laser writing technology that allows to create metal, semiconductive and dielectric micropatterns on substrate surface. In this work, a two step method, the combination of seed forming process, in which metallic Al seed was selectively generated on AlN ceramic substrate by direct writing technique using a pulsed Nd : YAG laser and subsequent electroless Ni plating on the activated Al seed, was presented. The effects of laser parameters such as pulse energy, scanning speed and pulse frequency on shape of Alseed and conductor line after electroless Ni plating were investigated. The nature of the laser activated surface is analyzed from XPS data. The line width of this metallic Al and Ni is analyzed using SEM. As a results, Al seed line with 24㎛ width and 100㎛ isolated line space is obtained. Finally, laser direct writing can be applied in the field between thin and thick film technique in electronic industry.

• 한국화재소방학회논문지
• /
• 제25권6호
• /
• pp.83-88
• /
• 2011

본 연구에서는 전기기기 및 가전기기 등의 배선으로 사용되는 비닐코드의 구조 및 특성을 제시하고, 에너지원의 종류에 따라 소손된 비닐평형코드(VFF, $1.25mm^2$)의 실체 사진 및 용융된 도체의 금속 단면 구조를 분석하였다. 정상 VFF는 소선 여러 가닥을 꼬아서 제작되었으며, 도체의 표면은 적갈색이다. 또한 도체의 금속 조직 분석에서 그레인이 연신된 것을 알 수 있었다. 일반 화염에 의해 소손된 VFF의 표면은 절연물이 탄화되어 도체의 표면에 융착되었고, 윤기가 없는 것을 알 수 있었다. 또한 용융 부분의 단면 구조 분석에서 일정한 모양의 보이드가 형성되었고, 전선 고유의 연신 구조는 확인할 수 없었다. 통전중인 VFF에 외부 화염이 인가되어 소손된 용융 도체의 단면 분석에서 전선 고유의 연신 구조는 없었고, 불규칙적인 보이드 및 주상 조직 등이 성장한 것을 알 수 있었다. 과전류에 의해 소손된 VFF는 표면이 고르게 탄화되었으며, 용융된 도체의 단면 구조 분석에서 수지상 조직의 성장이 확인되었다. 단락에 의해 용융된 VFF의 특성 분석에서 표면의 일부가 오염되었지만 약간의 윤기가 있고, 용융되어 재결합한 부분이 둥근 모양을 나타냈다. 또한 금속 현미경을 이용한 단면 구조 분석에서 경계면 및 주상 조직 등이 확인되었고, 용융된 도체 이외의 부분에서는 정상 구리와 같은 비정질체인 구조가 확인되었다.

• Progress in Superconductivity
• /
• 제7권1호
• /
• pp.69-76
• /
• 2005

Complex single buffer composed of yttrium and samarium oxide was deposited on the metallic substrates by MOCVD (metal organic chemical vapor deposition) method using single liquid source. Two different types of the substrates with in-plane textures of about $8{\sim}10$ degree of Ni and $3at.\%W-Ni$ alloy were used. Y(tmhd: 2,2,6,6-tetramethyl-3,5-heptane dionate)$_3$:Sm(tmhd)$_3$ of liquid source was adjusted to 0.4:0.6 to minimize the lattice mismatch between the complex single buffer and the YBCO. The epitaxial growth of $(Y_{x}Sm_{1-x})_{2}O_3$ was achieved at the temperature higher than $500^{\circ}C$ in $O_2$ atmosphere. However, it was found that the formation of NiO accelerated with increasing deposition temperature. By supplying $H_{2}O$ vapor, this oxidation of the substrate could be suppressed throughout the deposition temperatures. We could get the epitaxial growth on pure Ni substrate without the formation of NiO. The competitive (222) and (400) growths were observed at the deposition temperatures of $650\~750^{\circ}C$, but the (400) growth became dominant above $800^{\circ}C$. The $(Y_{x}Sm_{1-x})_{2}O_3$-buffered metallic substrates can be used as the buffer for YBCO coated conductor.

• 한국진공학회지
• /
• 제5권3호
• /
• pp.194-198
• /
• 1996

Detailed expermental studies of theelectronic structure of the valence and conduction bands of the mixed conductor $\beta$-LiAlindicate that a quasi-gap opens at the Fermi level, and the conduction states are highlylocalized, as opposed to the theoretical band structure calculations that predict predominant metallic behavior. Evidence for complex lithium migration effects involving the surface of Lial , induced by particle (electron or ion) bombardment and mechanical treatment , has been obtained as a byproduct of these experiments.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2005년도 High Temperature Superconductivity Vol.XV
• /
• pp.72-72
• /
• 2005

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2008년도 춘계학술발표대회 및 제14회 신소재 심포지엄
• /
• pp.17.2-17.2
• /
• 2008

• 한국통신학회논문지
• /
• 제21권6호
• /
• pp.1576-1586
• /
• 1996

The subject of this paper is the analysis of a Wire-TEM cell(W-TEM cell) which has an inner wire array rather than a metallic septum;its basic structure is similiar to a NBS TEM cell. To verify improved performances of this W-TEM cell as a standard EM field generator, well-known quasi-static approximations are employed and their resultant ingegral equations are numerically analyzed by moment method. Although the electric field strength of a W-TEM cell is 1.4 dB lower than tht of a NBS TEM cell, the uniformity of EM field patterns in a W-TEM cell is improved. It is also shown that the EM field distortions resulting from loading by the conditing objects under test(loading effects), are decreased considerably. This paper also deals with the investigations about relationship between the EM field distributions and the number of wire composing the inner conductor. Finally, the experimental analysis is performed on the practical model which is built on the basis of the design variables brought out by the theoretical andnumerical analysis.