• Journal of the Korean Ceramic Society
• /
• v.19 no.2
• /
• pp.145-151
• /
• 1982

Many materials such as silica gel, metallic oxide, activated alumina and alkaline earth metal carbonates were employed as filter media for gaseous oxides of ruthenium volatilized during high level radioactive waste processing. The adsorption efficiency of ruthenium on these materials was evaluated. For the purpose of observing behavior of ruthenium oxides, thermogravimetric analysis of ruthenium oxide in a stream of oxygen was carried out. The rate of volatilization was proportional to the square root of oxygen partial pressure, and increased exponentially with temperature. At $650^{\circ}C$, gaseous ruthenium oxides showed a strongly marked effect of deposition. Of all the materials available, calcium oxide proved to be the best that could be used to adsorb ruthenium.

• Culinary science and hospitality research
• /
• v.20 no.4
• /
• pp.49-58
• /
• 2014

This study investigates mineral contents and sensory properties of commercial bottled water in Korea. The contents of calcium and magnesium in the samples were determined 3.399-85.470 and 2.619-27.390 mg/L, respectively. The mineral contents of bottled water samples met the code of regulations for drinking water, for the hardness was determined 19.2-326 mg/L and the pH was measured as 6.31-7.74. As the sensory characteristics of bottled water samples were evaluated by 5-point hedonic scale, the samples which were below 100 mg/L of hardness had high acceptability. The acceptability was positively correlated with freshness (r=0.706) and sweetness (r=0.253), having a negative correlation with metallic taste (r=-0.402) and astringency (r=-0.234) (p<0.05). On the other hand, calcium content had a negative correlation with acceptability and freshness (p<0.05). The pH of the bottled water represented a negative correlation with acceptability and freshness, so the good acceptability and freshness were shown in the low pH, positively correlated with the intensity of metallic taste (p<0.05).

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.4
• /
• pp.661-669
• /
• 2000

This research was carried out to evaluate effect of metallic release and change of water corrosive indices by the pH and alkalinity adjustment using the SDLS (Simulated Distribution Loop System) which consist of six types of pipe loop with DCIP, PVC, PE, STS304, CP, GSP, respectively, and its effects on water quality changes which were microbes quality(SPC), residual chlorine. THMs and other parameters. And it was to propose optimal criteria of water quality control for the field application. According to the results, water control system by pH and alkalinity adjustment showed the changing of corrosive water and reducing of metallic release rate and it was not affects of THMs formation, microbes regrowth and variation of other parameters. Water quality stability and corrosion control were due to calcium carbonate precipitation film formation of pipe inner by water quality control. Therefore, corrosive water control system by pH and alkalinity adjustment can be attributed to effective water quality management in water distribution system according to water quality stability of pH and TIC(Total Inorganic Carbonate concentration) that affect the precipitation and dissolution of solids.

• Clean Technology
• /
• v.21 no.1
• /
• pp.45-52
• /
• 2015

We have introduced switching poles in the conventional electrolysis for the removal of ammonia in aquaculture wastewater to prevent the fouling on the electrode surface by the deposition of insoluble metallic compounds. We have also tried to locate the optimal period of switching poles considering the effect of the current loss during switching poles on the free chlorine generation. First, we have observed the decrease of free chlorine generation with the decrease of the period of switching poles due to the expected current loss, and this would lead to the decrease of ammonia removal efficiency. Meanwhile, the measurement of calcium and magnesium concentration in wastewater vs. the period of switching poles have demonstrated that a properly low level of fouling on the electrode surface could be retained with a period of switching poles of less than 60 sec by the decomposition of metallic compounds during switching poles. In a summary, we have optimized the period of switching poles to gain a high level of free chlorine generation and a high level of fouling prevention on the electrode at the same time.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.152-152
• /
• 2017

Titanium and its alloys have been widely used for biomedical applications. However, the use of the Ti-6Al-4V alloy in biomaterial is then a subject of controversy because aluminum ions and vanadium oxide have potential detrimental influence on the human body due to vanadium and aluminum. Hence, recent works showed that the synthesis of new Ti-based alloys for implant application involves more biocompatible metallic alloying element,such as, Nb, Hf, Zr and Mo. In particular, Nb and Hf are one of the most effective Ti ${\beta}$-stabilizer and reducing the elastic modulus. Plasma electrolyte oxidation (PEO) is known as excellent method in the biocompatibility of biomaterial due to quickly coating time and controlled coating condition. The anodized oxide layer and diameter modulation of Ti alloys can be obtained function of improvement of cell adhesion. Silicon (Si) and magnesium (Mg) has a beneficial effect on bone. Si in particular has been found to be essential for normal bone and cartilage growth and development. In vitro studies have shown that Mg plays very important roles in essential for normal growth and metabolism of skeletal tissue in vertebrates and can be detected as minor constituents in teeth and bone. Therefore, in this study, Si and Mg coatings on the hydroxyapatite film formed Ti-29Nb-xHf alloys by plasma electrolyte oxidation has been investigated using several experimental techniques. Ti-29Nb-xHf (x= 0, 3, 7 and 15wt%, mass fraction) alloys were prepared Ti-29Nb-xHf alloys of containing Hf up from 0 wt% to 15 wt% were melted by using a vacuum furnace. Ti-29Nb-xHf alloys were homogenized for 2 hr at $1050^{\circ}C$. The electrolyte was Si and Mg ions containing calcium acetate monohydrate + calcium glycerophosphate at room temperature. The microstructure, phase and composition of Si and Mg coated oxide surface of Ti-29Nb-xHf alloys were examined by FE-SEM, EDS, and XRD.

• Economic and Environmental Geology
• /
• v.16 no.3
• /
• pp.149-161
• /
• 1983

Fuller's earth deposits from Miocene sedimentary sequences in Gyeong Sang-do contain up to 95% Ca-montmorillonite accompanied by cristobalite, clinoptilolite, mordenite, quartz, feldspar and X-ray amorphous material. Differential thermal analysis, infrared and electron microscopic data are given for the montmorillonite component. The ease with which the exchangeable calcium of the montmorillonite could be replaced by sodium (to give a product with properties similar to that of a bentonite) was monitored by the Atterberg liquid limit test. Some samples tested as possible binders for foundry moulding sands gave results that compared favourably with material currently being used for this application. Many of the samples also met the OCMA specifications for clays used in drilling muds.

• Korean Journal of Materials Research
• /
• v.11 no.7
• /
• pp.609-614
• /
• 2001

This study was carried out to obtain a basic data on the production of the Nd-Fe-B system rare earth anisotropic bonded magnet by R-D & HDDR process. The reduction reaction of Nd$_2$O$_3$by metallic Ca and the diffusion reaction of Nd into Fe-B alloy powder were investigated for the production the Nd-Fe-B alloy powder. We concluded that a proper quantity of metallic Ca was about 1.3 times of theoretical equivalent from the yields of Nd and B after the R-D reaction at 100$0^{\circ}C$ for 1h. In the XRD analysis the diffusion reaction of Nd into the center of Fe-B alloy powder for the completed homogenization was required through about 45min at 110$0^{\circ}C$ for the R-D reaction, and also the maximum efficiency on the yield of Nd was obtained with such a condition. Residual Ca and oxygen contents of the final powder sample after washing were detected in 0.17wt% and 0.42wt% by ICP and oxygen analyzer, respectively.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.1
• /
• pp.1-13
• /
• 2012

We measured various geochemical parameters, including the grain size, loss on ignition(LOI), total organic carbon(TOC), total nitrogen(TN), total sulfur(TS) and metallic elements, in surface sediment collected from 19 stations in Gamak Bay in April 2010 in order to understand the sedimentary types, the origin of organic matters, and the distribution patterns of alkali(Li, Na, K, Rb) and alkaline earth(Be, Mg, Ca, Sr, Ba) elements. The surface sediments were mainly composed of mud. The concentrations of Chlorophyll-a, TOC, TN, TS and LOI in sediment were the highest at the cultivation areas of fish and shellfish in the northern and southern parts of the bay. The redox potential(or oxidation-reduction potential) showed the positive value in the middle part of the bay, indicating that the surface sediment is under oxidized condition. The organic materials in sediment at almost all of stations were characterized by the autochthonous origin. Based on the overall distributions of metallic elements, it appears that the concentrations of alkali and alkaline earth elements except Ba in sediment are mainly influenced by the dilution effect of quartz. The concentrations of Sr and Ba are also dependent on the secondary factors such as the effect of calcium carbonate and the redox potential.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.34 no.3
• /
• pp.193-201
• /
• 2024

Objectives: Paints contain various types of metal substances. However, our review of MSDS (Material Safety Data Sheets) for paints found that their components were often kept secret or exact content information was otherwise not provided. We analyzed the metal elements in various inorganic pigment-based paints available in South Korea in this study and checked whether they contain hazardous metal substances as defined by the Occupational Safety and Health Acts. We investigated issues of health hazard classification related to the metal elements. The study is intended to contribute to strengthening the management of hazardous substances by suggesting improvements to MSDS. Methods: We randomly selected 19 samples that were predicted to contain hazardous inorganic pigments after reviewing MSDS among paints currently in use. The samples were analyzed using XRF (X-ray Fluorescence spectrometry), ICP_OES (Inductively Coupled Plasma-Optical Emission Spectroscopy) and SP-ICP-MS (Single Particle-ICP-Mass Spectroscopy). Results: The most common elements in the samples were Al (aluminum), Fe (iron), Ti (titanium), Ca (calcium), and Si (silica). One sample contained more lead than allowed by the limits. There were ten samples that could potentially contain nanoforms, seven samples that contained titanium dioxide, and six samples that contained complex inorganic color pigments (CICPs). Conclusions: Inorganic pigments in paints should be evaluated for hazards separately from other metallic compounds and reflected in the MSDS because they have different characteristics than other metallic compounds. These include particle size, crystal structure, and complex substances. The results of this study can be helpful for determining whether a paint contains sufficient hazardous metal compounds to affect its classification, and it can be a guideline for improving MSDS through comparative review and rationalization with the manufacturer's MSDS. This would make it possible to contribute to the management of chemical substances in the workplace through the proper MSDS disclosure of paints.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.195-195
• /
• 2016

Titanium and its alloys are widely used as implants in orthopedics, dentistry and cardiology due to their outstanding properties, such as high strength, high level of hemocompatibility and enhanced biocompatibility. Hence, recent works showed that the synthesis of new Ti-based alloys for implant application involves more biocompatible metallic alloying element, such as, Nb, Hf, Zr and Mo. In particular, Nb and Hf are one of the most effective Ti ${\beta}-stabilizer$ and reducing the elastic modulus. Plasma electrolyte oxidation (PEO) is known as excellent method in the biocompatibility of biomaterial due to quickly coating time and controlled coating condition. The anodized oxide layer and diameter modulation of Ti alloys can be obtained function of improvement of cell adhesion. Silicon (Si) and magnesium (Mg) has a beneficial effect on bone. Si in particular has been found to be essential for normal bone and cartilage growth and development. In vitro studies have shown that Mg plays very important roles in essential for normal growth and metabolism of skeletal tissue in vertebrates and can be detected as minor constituents in teeth and bone. The aim of this study is to research Si and Mg doped hydroxyapatite film formation by plasma electrolytic oxidation. Ti-29Nb-xHf (x= 0, 3, 7 and 15wt%, mass fraction) alloys were prepared Ti-29Nb-xHf alloys of containing Hf up from 0 wt% to 15 wt% were melted by using a vacuum furnace. Ti-29Nb-xHf alloys were homogenized for 2 hr at $1050^{\circ}C$. Each alloy was anodized in solution containing typically 0.15 M calcium acetate monohydrate + 0.02 M calcium glycerophosphate at room temperature. A direct current power source was used for the process of anodization. Anodized alloys was prepared using 270V~300V anodization voltage at room. A Si and Mg coating was produced by RF-magnetron sputtering system. RF power of 100W was applied to the target for 1h at room temperature. The microstructure, phase and composition of Si and Mg coated oxide surface of Ti-29Nb-xHf alloys were examined by FE-SEM, EDS, and XRD.