• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2007년도 추계학술발표논문집
• /
• pp.133-135
• /
• 2007

PMMA (polymethyl metha crylate) 유기막의 농도별 최적화를 위하여 1, 2, 4, 6, 8 wt.%의 PMMA 농도별로 Al/PMMA/ITO/Glass 구조의 MIM (metal- insulator-metal) 캐패시터 소자를 제작하였다. 유기 절연층의 형성은 ITO/Glass 기판 위에 PMMA를 용질로, Anisle을 용매로 사용하여 스핀코팅법으로 소자를 형성하였다. 제작된 소자에 대해 농도에 따른 전기적 특성을 조사한 결과 누설전류는 2wt.% 농도의 PMMA로 제작된 소자에서 0.3 pA로 가장 우수한 결과를 얻을 수 있었다. 또한 동일한 PMMA 농도로 제작된 캐패시터 소자의 정전용량은 1.2 nF으로 가장 좋은 결과를 얻을 수 있었으며, 계산된 값과 매우 유사한 값을 얻을 수 있었다.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2007년도 춘계학술발표회 논문집
• /
• pp.31-35
• /
• 2007

RFID is going to be the core technology for contact-less information transfer means in the era of ubiquitous. Up until recent days, the RFID didn't fit to be used in outdoor environment due to the fact that it was developed for logistics which does not require stability in outdoor. But recently, requests for the RFID to be used in the outdoor environment have increased, and this laid the foundation for the development of outdoor tags, including MetalTag, which can be utilized in many different ways. In this research, to provide information on the control point using the RFID at the sight, RFID tags, which can place at the control point, and PDA based system were developed.

• Bulletin of the Korean Chemical Society
• /
• 제35권9호
• /
• pp.2665-2668
• /
• 2014

Aptamers are oligonucleotides or peptide molecules that are able to bind to their specific target molecules with high affinity via molecular recognition. In this study, we present development of aptamer-based precipitation assays (or simply aptamoprecipitation) for His-tagged proteins and thrombin to compare their purification efficiency with other conventional affinity precipitation methods. A crosslinking method was employed to immobilize thiol-functionalized aptamers onto the surface of polystyrene resins, enabling them to specifically bind to His-tag and to thrombin, respectively. The resulting aptamer-functionalized resins were successfully applied via a one-step experiment to purification of His-tagged proteins from complex E. coli and to thrombin extraction, exhibiting superior or at least comparable purification results to the conventional immobilized metal affinity precipitation or immunoprecipitation.

• 한국전기전자재료학회논문지
• /
• 제27권5호
• /
• pp.322-327
• /
• 2014

Internal corrosion of the distribution line can be detected in order to develop techniques of non-destructive inspection methods that operate only on the metal track eddy current diagnosis is possible by applying the technique investigated. Sensor for the production of a finite element method modeled by using an eddy current sensor, a distribution line by using an accelerated aging samples of sodium hydroxide was prepared. Sheathed cables for internal corrosion studies detected using an eddy current sensor is considered to be possible.

• Journal of Electrical Engineering and Technology
• /
• 제7권3호
• /
• pp.401-405
• /
• 2012

Current research about voltage leakage involves investigation of the effects of leaked voltage and current on humans through simulated environments and dummies. Electrocution results from leaked current when electricity flows through the body as a result of potential difference. Research that analyzes actual electrocution is insufficient because of the danger from leaked voltage present in the leakage area. This thesis analyzes magnetic flux density from current around a leak to investigate the distribution of current. The authors used a simulated environment to investigate electrocution accidents that frequently occur during floods through leakage along metal surfaces, and evaluated the distribution of leaked magnetic flux.

• 전자공학회논문지CI
• /
• 제45권5호
• /
• pp.201-208
• /
• 2008

능동형 RFID 시스템은 금속재질에 취약한 수동형의 단점을 극복하는 동시에 인식거리가 길고, 인식률이 좋아 항만물류나 국방 분야에서 사용이 확대되고 있다. 하지만 동일한 표준으로 개발된 제품의 서로 간에 인식이 불가능한 사례가 보고되고 있으며, 국제적으로 정확한 평가방법 및 장치가 정립되지 않아 개발된 제품들 간의 상호 운용성 및 표준 적합성 평가에 대한 어려움이 존재한다. 본 논문에서는 능동형 RFID 시스템의 적합성 평가를 위한 에뮬레이터의 하드웨어 및 소프트웨어를 설계하고 제작하였다. 설계된 장치는 Matlab의 Simulink를 통한 시뮬레이션으로 성능을 분석하였고, 실제 능동형 RFID 태그의 표준 적합성 평가를 통해 에뮬레이터의 적용 가능성을 검증하였다.

• 공업화학
• /
• 제16권2호
• /
• pp.250-256
• /
• 2005

자동차 산업에서의 도장 외관은 아주 중요하다. 이러한 도장외관의 향상을 위해서 기본적으로 도막의 내식성과 밀착성이 해결되어야 한다. 도막의 물성의 향상을 위해서 금속의 화성피막은 매우 중요한 요소가 되고 있다. 전착도장 중 음극에서의 pH는 12 정도까지 증가하고, 이 같은 강알카리 조건에서 금속과 화성피막의 용해가 일어난다. 이 같은 현상의 화성피막과 소재사이의 결합력을 감소시키게 된다. 일반적으로 인산염 피막구조는 hopeite 및 phosphphylife 구조를 갖지만 hopeite 피막 구조보다는 phosphophyllite 피막구조가 내식성이 보다 우수하고, 양이온 전착도료에 의한 전착도장에서 강알카리화된 계면에서 피막의 알카리 용해성이 적어 내수밀착성의 향상을 보인다. Ni, Mn 등의 보조금속의 첨가는 P-ratio (phosphophyllite/ hopeite + phosphophyllite)를 증가시키므로 내수 밀착성과 내식성을 향상시키게 됨을 알 수 있었다.

• 반도체디스플레이기술학회지
• /
• 제6권4호
• /
• pp.69-73
• /
• 2007

The MIM(metal-insulator-metal) capacitors with the Al/PMMA/ITO/Glass structures were manufactured according to various PMMA concentration of 1, 2, 4, 6, 8 wt%. The lowest leakage current and the largest capacitance were found to be 2.3 pA and 1.2 nF, respectively, for the device with 2 wt% PMMA concentration. The measured capacitance of the devices was almost same values with the calculated one. The optimum film thickness was obtained at the value of 48 nm, showing that the capacitance and leakage current were 1.92 nF, 0.3 pA at 2 wt%, respectively. From this experiment, the PMMA gate insulator films can be applicable to the organic thin film transistors.

• 한국분말재료학회지
• /
• 제19권6호
• /
• pp.446-450
• /
• 2012

In order to fabricate the porous Mo with controlled pore characteristics, unique processing by using $MoO_3$ powder as the source and camphene as the sublimable material is introduced. Camphene-based 15 vol% $MoO_3$ slurries, prepared by milling at $50^{\circ}C$ with a small amount of dispersant, were frozen at $-25^{\circ}C$. Pores were generated subsequently by sublimation of the camphene during drying in air for 48 h. The green body was hydrogen-reduced at $750^{\circ}C$, and sintered at $1000-1100^{\circ}C$ for 1 h. After heat treatment in hydrogen atmosphere, $MoO_3$ powders were completely converted to metallic W without any reaction phases. The sintered samples showed large pores with the size of about $150{\mu}m$ which were aligned parallel to the camphene growth direction. Also, the internal wall of large pores and near bottom part of specimen had relatively small pores due to the difference in the camphene growth rate during freezing process. The size of small pores was decreased with increase in sintering temperature, while that of large pores was unchanged. The results are strongly suggested that the porous metal with required pore characteristics can be successfully fabricated by freeze-drying process using metal oxide powders.

• 한국재료학회지
• /
• 제21권9호
• /
• pp.520-524
• /
• 2011

Porous W with controlled pore characteristics was fabricated by a freeze-drying process. $WO_3$ powder and camphene were used as the source materials of W and sublimable vehicles, respectively. Camphene slurries with $WO_3$ contents of 10 and 15 vol% were prepared by milling at $50^{\circ}C$ with a small amount of oligomeric polyester dispersant. Freezing of a slurry was done in a Teflon cylinder attached to a copper bottom plate cooled at $-25^{\circ}C$ while the growth direction of the camphene was unidirectionally controlled. Pores were generated subsequently by sublimation of the camphene during drying in air for 48 h. The green body was hydrogen-reduced at $800^{\circ}C$ for 30 min and sintered in a furnace at $900^{\circ}C$ for 1 h under a hydrogen atmosphere. Microstructural observation revealed that all of the sintered samples were composed of only W phase and showed large pores which were aligned parallel to the camphene growth direction. The porosity and pore size increased with increasing camphene content. The difference in the pore characteristics depending on the slurry concentration may be explained by the degree of powder rearrangement in the slurry. The results strongly suggest that a porous metal with the required pore characteristics can be successfully fabricated by a freeze-drying process using metal oxide powders.