• 제목/요약/키워드: Metal recovery

검색결과 540건 처리시간 0.034초

Al 스크랩으로부터 금속회수에 관한 연구 (A Study of the Metal Recovery from the Aluminium Scrap)

  • 김준수;임병모;윤의박
    • 자원리싸이클링
    • /
    • 제4권1호
    • /
    • pp.25-30
    • /
    • 1995
  • 본 연구에서는 Al 스크랩으로부터 재생지금 제조시 시료의 예비처리, 용제첨가 및 용해분위기가 Al 회수율에 미치는 영향을 조사하였다. 실험결과에 따르면 Al 드로스는 용탕표면에서의 산화반응에 의해 발생하였다. 예비처리의 영향에 다르면 탈지하지 않고 압착한 칩 bale 시료의 경우에는 압착하지 않은 칩 시료에 비해 약 14%의 회수율이 증가하였으며, Al seed 용해공법을 채택하는 경우에는 탈지하지 않고 단지 세편과 압착만을 행하여도 97%의 높은 회수율을 얻을 수 있었다. Al 스크랩 용해시 7wt%까지 첨가된 염에 의해 회수율은 최대 95%까지 증대되었으며, 탄소 및 질소분위기에서도 역시 회수율은 증가하였으나, 염과 탄소의 혼합분 첨가시 과잉 첨가된 탄소는 오히려 회수율을 감소시켰다.

  • PDF

저품위 동광석의 세균침출에 관한 연구 5 (A Study on Bacterial Leaching of Low-Grade Copper Mineral(V))

  • 민봉희;박원구;이강순
    • 미생물학회지
    • /
    • 제12권1호
    • /
    • pp.25-30
    • /
    • 1974
  • It was convinced that with a relatively small capital investment and with a low operating cost, appreciable amounts of cement copper could be produced from low-grade minerals by the application of a bacterial leaching method. For the recovery of cement copper from the impure pregnant solution, direct precipitation of copper with tin plates by a bacterial leaching method was feasible. The results obtained were as follows: 1)In order to remove the cement copper from the reducing metal, aeration and agitation method were more effective and economic than shaking method. 2)The rate of copper recovery from the pregnant solution was accerelated according to increasing quantities of reducing metal. However, the excess of reducing metal reduced the grade of cement copper. 3)Among the comparative experiments of copper recovery at each reaction temperature of $10^{\circ}C$, $20^{\circ}C$, and $30^{\circ}C$, the recovery rate of copper at $30^{\circ}C$from the pregnant solution was highest. 4)Direct cementation method on iron-containing metal was an excellent method for the recovery of cement copper in bacterial leaching.

  • PDF

FCAW에서 용접변수에 따른 용접금속 강도 및 와이어 합금원소의 회수율 변화 (Effects of Welding Parameters on Weld Metal Strength and Recovery of Alloying Elements in FCAW)

  • 정동희;방국수;박찬;장웅성;박철규
    • Journal of Welding and Joining
    • /
    • 제26권2호
    • /
    • pp.69-74
    • /
    • 2008
  • 590MPa grade weldable steels were gas metal arc welded with flux cored wires. Welding parameters such as current, voltage, and speed were varied independently. Effects of each parameter on the strength and chemical composition of weld metal were investigated. Increase of voltage caused decrease of weld metal tensile strength due to the low recovery of alloying elements such as carbon and manganese. On the contrary, increase of current and speed resulted in increase of weld metal strength because of higher recovery of the alloying elements.

EAF 분전의 화학적처리에 와한 금속아연의 제조에 관한 연구 (The Study on the Recovery Process of Zinc Metal from EAF Dust by Chemical Treatment)

  • 정래윤;이진휘
    • 한국응용과학기술학회지
    • /
    • 제27권2호
    • /
    • pp.208-215
    • /
    • 2010
  • EAF dust which is contained around 30% of zinc, 15% of iron and 3% of lead individually, is chemically treated by ammonium chloride, ammonia water, ammonia gas and carbon dioxide, and also tested and identified the ratios of the recovery of In by applied the variations of particle size, pH and heating temperature as well, in order to getting optimized recovery of the In metal after performing all of those processes. Experimental results showed that the rate of Zn recovery is 97% when the mixture of 1.3 of $NH_4Cl$/EAF is heated to the temperature of $400^{\circ}C$ and leached by water, and 95% recovery of In when ammonia gas and carbon dioxide is added simultaneously and adjust the 9.5 of pH to the same mixture above. For the purpose of remove the impurities in the mixed sample, which is prepared by the two samples, indicated above showing as the ratio of 95% and 97% recovery, in case of applied the cementation process to it, and also by electrolytic process, produced the In plate of 95~97%, and acquired 99-99.5% of In metal ingot finally by applied the heating process at $470{\sim}500^{\circ}C$.

에너지절약형 동(Cu)전해채취 및 전류밀도의 영향 (The effects of current density and nickel content on copper electrowinning by energy saving system)

  • 이후인;이재천;박진태;김민석;손정수
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
    • /
    • pp.386-387
    • /
    • 2006
  • This study is about the recycling technology of scrap a PCB(printed circuit board) produced in home appliances or automobile industry. And we develop the recycling technology of cooper (Cu)which is contained to leaching solution. In stead of electrolytic collecting in existing sulphuric atmosphere, we apply process using the ammonia solution which is used in economizing energy. So m the process of electrolyzing scrap a PCB through the leaching and separation, we examine the effect of the nickel contained to the solution and the cooper degree of purity which is changed according to current density.

  • PDF

Development of Metal Recovery Process for Municipal Incineration Bottom Ash (MIBA)

  • Kuroki, Ryota;Ohya, Hitoshi;Ishida, Kazumasa;Yamazaki, Kenichi
    • 자원리싸이클링
    • /
    • 제28권3호
    • /
    • pp.21-25
    • /
    • 2019
  • The utilization of incineration ash from municipal waste must be promoted to solve the social problem on the shortage of final disposal site. In this research, metals should be recovered to avoid the damage of the crushing machine during the utilization of incineration ash in cement industry. In fact, incineration bottom ash from municipal waste contains iron in 3-5%. Nonferrous metal and stainless steel in 1% is also included. The research and development on the physical recovery process was performed not only to remove the metals but also to recover high grade products. Metals were separated from incineration ash in Maruya Co. Ltd.. In fact, iron scrap recovered by magnetic separation can be selled. After that, mixed metal was separated from incineration ash using screen. In this research, mixed metal tried to divided copper, aluminum, brass and stainless steel using drum type magnetic separation, eddy current separation and high magnetic separation. As a result, recovered iron had an 80% for the grade. Aluminum was recovered by eddy current separation without copper and brass.

전기폭발방식을 이용한 동(Cu) 미분 제조 및 인가전압의 영향 (The effects of applied voltage on copper powder manufactured by electric explosion)

  • 이후인;김원백;서창열;손정수
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2007년도 추계학술대회 논문집
    • /
    • pp.474-475
    • /
    • 2007
  • Wire electrical explosion(WEE) has been used for the production of fine metal particles. In WEE, electrical powder was stored and compressed into capacitor and released to produce fine particles through evaporation and condensation. In this study, the effect of applied voltage on the size of copper powders was investigated. High tension was added up to the explosion device by dividing 4 steps. At voltages lower than 5.2 kV, the fraction of powders finer than $44{\mu}m$ was almost negligible. The effectiveness of explosion increased sharply with increased voltage over 5.8 kV. At the highest voltage of 6.4 kV, more than 80% of explosion products were finer than $44{\mu}m$.

  • PDF

주석 함유 폐자원의 공정부산물 전처리 기술 (Development of Pre-treatment for Tin Recovery from Waste Resources)

  • 진연호;장대환;정항철;이기웅
    • 한국분말재료학회지
    • /
    • 제21권2호
    • /
    • pp.142-146
    • /
    • 2014
  • Fundamental experiences have been studied for development of pre-treatment process of Sn by-products such as solders. Dry and wet separation/recovery processes were considered by the differences of physical properties. The by-products, which are analyzed by solder metal and oxides. The metal and oxide were simply separated by dry ball-milling process for 12 hours, after that recovery metal powder might be reusable as lead or lead-free solders. In terms of wet separation process, samples were dissolved in $HNO_3+H_2O_2$ and the precipitation were analyzed by $SnO_2$. Overall efficiency of recovery might be increasing via developing simple pre-treatment process.

Recycling of chelating agents after extraction of heavy metals contaminated in soil

  • Jung, Oh-Jin
    • Environmental Sciences Bulletin of The Korean Environmental Sciences Society
    • /
    • 제10권S_3호
    • /
    • pp.139-148
    • /
    • 2001
  • Heavy metals such as Cu, Ni, Cd, and Pb were chemically extract from the contaminated soils using the chelating agents, EDTA and DTPA. These chemical extraction have been focused on its applicability to a wide range of soils. Results of extractive efficiency for heavy metal follow the order : Cu-EDTA $\geq$ Ni-EDTA > Pb-EDTA > Cd-EDTA > Cu-DTPA> Pb-DTPA. This result is coincided with order of conditional formation constants(Kr) of metal-chelate agent. The second study involved the recovery of the metals and EDTA from complex solutions by an electromembrane process. The overall processes of regeneration, recovery, and reuse were evaluated. The electrochemical studies showed that copper could be chosen as an electrode to plate Cd, Cu, and Pb. At least 95% of 75 of EDTA and associated Cu or Pb could be recovered by the electromembrane process. Recovery of Cd by electodeposition was not possible with the copper electrode. The percent EDTA recovery is equal to the percentage of metal electroplated from the chelates.

  • PDF