• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.1085-1087
• /
• 2002

To have cost down and get improved image quality and performance of plasma display panel, several factors have been developed including development of low price material and improvement in production for PDP front plate. In this work, viscosity and surface characteristics of transparent dielectric were investigated to find the optimum and low price materials fabrication condition of transparent dielectric paste. It was found that uniformity and transmissivity of green and fired dielectrics had some relationship with the kinds and content of binder, and solvent as well.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.806-808
• /
• 2004

본 연구에서는 MEMS 공정에 의해 제작된 실리콘 멤브레인 위에 스크린 프린팅법을 이용하여 압전 후막을 제작, 그 특성을 관찰하였다. 실리콘 웨이퍼의 후면을 각각 다른 4가지의 크기로 식각하여 멤브레인을 제작하였다. 제작된 멤브레인 위에 하부전극 Ag-Pd를 스크린 프린팅법으로 형성하고, 그 위에 압전 후막을 스크린 프린팅하여 열처리 하였다. 제작된 압전 후막위에 MFM(Metal-Ferroelectric-Metal)구조의 액츄에이터를 제작하기위해 상부전극으로 Pt를 스퍼터링으로 증착하였다. 제작된 마이크로 액츄에이터는 SEM(Scanning Electron Microscope)으로 구조분석하고, RT66A와 MTI2000으로 동작특성을 해석 하였다.

• Transactions of the Society of Information Storage Systems
• /
• v.1 no.1
• /
• pp.108-114
• /
• 2005

The generation of fine relics of suspensions is a significant interest as it holds the key to the fabrication of electronic devices. These processes offer opportunities for miniaturization of multilayer circuits, for production of functionally graded materials, ordered composites and far small complex-shaped components. Some novel printing methods of depositing ceramic and metal droplets were suggested in recent years. In an electro-hydrodynamic printing, the metallic capillary nozzle can be raised to several kilovolts with respect to the infinite ground plate or pin-type electrode positioned a few millimeters from the nozzle tip. Depending on the electrical and physical properties of the liquid, for a given geometry, it Is possible to generate droplets in any one of three modes, dripping, cone-jet and multi-jet. In this experiment, an alumina suspension flowing through a nozzle was subjected to electro-hydrodynamic printing using pin-type electrodes in the cone-jet mode at different applied voltages. The pin-type electrodes of 1, 100, 1000${\mu}m$ in diameter were used to form fine ceramic patterns onto the substrates. Various feature sizes with applied voltages and electrode diameters were measured. The feature sizes increased with the electrode diameter and applied voltages. The feature size was as fine as $30 {\mu}m$.

• Journal of Powder Materials
• /
• v.22 no.2
• /
• pp.138-145
• /
• 2015

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.345-346
• /
• 2009

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2006.11a
• /
• pp.27.2-27.2
• /
• 2006

• Journal of the Korea Convergence Society
• /
• v.10 no.4
• /
• pp.189-194
• /
• 2019

This thesis aimed to apply the 3D-printing technology rapidly introduced to the overall industry to jewelry design. In the results of examining preceding researches, out of 3D-printing methods, the FMD method was used the most in design area. However, for jewelry design, the 3D-printing is used for casting process out of production processes, so that the printing method is not FMD, but DLP. Thus, the researcher examined the material functions and applicability of jewelry design through research works, by applying the 3D-printing in DLP method to jewelry design. In the results, brooches were completed by applying the 3D-printing to the jewelry design with no casting process, and then utilizing enamel and pure silver together. Producing light and solid completed products in various colors, they were verified as applicable materials. Also, as the size and form of curved design mainly used for non-geometric jewelry design could be accurately predicted through Rhino CAD, diverse possibilities of advancement to be easily used for the development of formative form of jewelry design in the future were revealed.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.11 no.2
• /
• pp.109-114
• /
• 2005

This paper introduces the current status of total overseas packaging industries. The total market of the world packaging industry reached over 500 billion dollars in 2002. The top nations for the packaging industry were U.S. at about 27 percent, the countries of Western Europe at about 27%, Japan at about 14%. In terms of packaging materials, the overall market rate for paper, plastics, and metal parts in world packaging industry was 84%. Also, the market rate of glass, packaging machine, and others was only 5-6%. Among EU nations, Germany showed largest packaging consumption of 23 percent in 2000, and consumed about 17,125,814 ton of packaging materials yearly. For paper and paperboard cartons, the percentage used for the packaging consumption was about 39.4%. The consumption rate of plastic and glass packaging was approximately 14.6% and 23.7% respectively. For metal packaging the consumption rate was about 5.9%. In Japan, the production rate of packaging materials was decreased slowly at paper, metal, glass, and wood areas, but plastic packaging showed a constant rate of growth. In China, total production of packaging industry amounted to about 33.7 billion in 2003. The paper packaging in china was a remarkable production rate of 32%. The production rate of plastic and printing packaging was 28% and 20% respectively. The rate of packaging industry for printing in China was much higher than that in other countries.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.6
• /
• pp.1865-1872
• /
• 2011

This study investigates the sensitivity of a gas sensor to volatile organic compounds (VOCs) at various operating temperatures and catalysts. Nano-sized powdered $WO_3$ prepared by sol-gel and chemical precipitation methods was mixed with various metal oxides. Next, transition metals (Pt, Ru, Pd, and In) were doped on the surface of the mixture. Metal-$WO_3$ thick films were prepared using the screen-printing method. The physical and chemical properties of the films were studied by SEM/EDS, XRD, and BET techniques. The measured sensitivity to VOCs is defined as the ratio ($R_a/R_g$) of resistance ($R_{air}$) of $WO_3$ film in the air to resistance ($R_{gas}$) of $WO_3$ film in a VOCs test gas. The sensitivity and selectivity of the films were tested with various VOCs such as acetaldehyde, formaldehyde, methyl alcohol, and BTEX. The thick $WO_3$ film containing 1 wt % of Ru and 5 wt % of $SnO_2$ showed the best sensitivity and selectivity to acetaldehyde gas at an operating temperature of 300 $^{\circ}C$.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.6
• /
• pp.89-94
• /
• 2016

Consumer orientation requires that companies understand consumer needs and produce products that meet their expectations. This study proposes a new additive method that creates a polymer/metal bonding layer and thus can lighten the weight of helmets to develop a consumer-oriented 3D printing helmet. The composite solution is experimentally prepared with copper formate and a photopolymer resin. Stereolithography apparatus and photothermal reactions are introduced to fabricate an adhesive hybrid layer of copper metal and polymer. A UV pulse laser with a 355 nm wavelength was installed to simplify this process. Resistance, adhesion, and accuracy were investigated to evaluate the properties of the layer produced.