• Applied Chemistry for Engineering
• /
• v.33 no.1
• /
• pp.11-16
• /
• 2022

Metal-organic frameworks (MOFs) are porous materials with nano-sized pores. The degree of gas adsorption and pore size can be controlled according to types of metal ions and organic ligands. Many studies have been conducted on MOFs in the fields of gas storage and separation, and gas sensors. For rapid and quantitative gas adsorption/desorption analyses, it is necessary to form various MOF structures in uniform films on a sensor surface. In this review, some of representative direct methods for uniformly synthesizing MOFs such as MIL-53 (Al), ZIF-8, and Cu-BDC from anodized aluminum oxide, zinc oxide nanorods, and copper thin films, respectively on the surface of a microresonator are highlighted. In addition, the operation principle of quartz crystal microbalance and microcantilever, which are representative microresonators, and the interpretation of signals that change when gas is adsorbed to MOFs are covered. This is intended to enhance the understanding of gas adsorption/desorption analysis of MOFs using microresonators.

• Journal of the Korean Electrochemical Society
• /
• v.7 no.4
• /
• pp.206-210
• /
• 2004

All array of carbon paste-based electrodes was prepared by screen printing the carbon paste modified with metal oxides $(TiO_2,\;RuO_2,\;PbO_2,\;Ni(OH)_2)$ and Prussian blue (PB). An electronic tongue system was assembled with the carbon-paste electrode array, and applied to discriminate the tastes of various commercial beverages and foods by measuring the chronoamperometric responses to the samples diluted in 0.1M carbonate buffer (pH 9.6). The results were analyzed with principal component analysis(PCA) method and plotted on two dimensional PCA coordinate; it was apparent that the amperometric electronic tongue system could discriminate the types of various foods and beverages.

• Journal of the Korean Physical Society
• /
• v.73 no.10
• /
• pp.1444-1451
• /
• 2018

The surface-to-volume ratio of one-dimensional (1D) semiconductor metal-oxide sensors is an important factor for achieving good gas sensing properties because it offers a wide response area. To exploit this effect, in this study, we determined the optimal calcination temperature to maximize the specific surface area and thereby the sensitivity of the sensor. The $In_2O_3$ nanorods were synthesized by using vapor-liquid-solid growth of $In_2O_3$ powders and were decorated with the Pt nanoparticles by using a sol-gel method. Subsequently, the Pt nanoparticle-decorated $In_2O_3$ nanorods were calcined at different temperatures to determine the optimal calcination temperature. The $NO_2$ gas sensing properties of five different samples (pristine uncalcined $In_2O_3$ nanorods, Pt-decorated uncalcined $In_2O_3$ nanorods, and Pt-decorated $In_2O_3$ nanorods calcined at 400, 600, and $800^{\circ}C$) were determined and compared. The Pt-decorated $In_2O_3$ nanorods calcined at $600^{\circ}C$ showed the highest surface-to-volume ratio and the strongest response to $NO_2$ gas. Moreover, these nanorods showed the shortest response/recovery times toward $NO_2$. These enhanced sensing properties are attributed to a combination of increased surface-to-volume ratio (achieved through the optimal calcination) and increased electrical/chemical sensitization (provided by the noble-metal decoration).

• Transactions on Electrical and Electronic Materials
• /
• v.16 no.2
• /
• pp.78-81
• /
• 2015

Pure ZnO and ZnO nanowires doped with 3 wt.% Ga (‘3GZO’) were grown by pulsed laser deposition in a furnace system. The doping of Ga in ZnO nanowires was analyzed by observing the optical and chemical properties of the doped nanowires. The diameter and length of nanowires were under 200 nm and several ${\mu}m$, respectively. Changes of significant resistance were observed and the sensitivities of ZnO and 3GZO nanowires were compared. The sensitivities of ZnO and 3GZO nanowire sensors measured at 300℃ for 1 ppm of ethanol gas were 97% and 48%, respectively.

• Electronics and Telecommunications Trends
• /
• v.28 no.2
• /
• pp.77-85
• /
• 2013

본고에서는 의료용, 보안용, 정밀거리 측위 등 다양한 분야에 응용이 가능한 근거리 고해상도 레이더 칩 기술에 대하여 소개한다. 먼저 근거리 고해상도 레이더 칩의 대표적인 구조와 동작원리에 대하여 기술하고 상용제품, 최신 논문에서 발표된 레이더 칩에 대하여 소개하였다. 고해상도를 얻기 위한 짧은 펄스 폭(나노초, 십억분의 1초)을 가지는 펄스를 송신하고 목표물을 맞고 되돌아온 에코 펄스를 고해상도로 수신하여 복원된 펄스로부터 얻어지는 거리정보로부터 신호처리 과정을 거쳐 고도화된 응용 분야에 따른 부가적인 정보를 얻는다. 수신기는 상관(correlation)법에 의한 수신 방식과 샘플링(sampling)에 의한 수신 방식으로 크게 나눌 수 있다. 끝으로 한국전자통신연구원에서 개발 중인 CMOS(Complementary Metal Oxide Semiconductor) 기술을 이용한 근거리 레이더 칩의 목표 성능, 구조, 설계 및 측정 결과에 대하여 소개하였다.

• Journal of information and communication convergence engineering
• /
• v.10 no.2
• /
• pp.194-199
• /
• 2012

This paper proposes a novel scheme of a gray scale fingerprint image for a high-accuracy capacitive sensor chip. The conventional grayscale image scheme uses a digital-to-analog converter (DAC) of a large-scale layout or charge-pump circuit with high power consumption and complexity by a global clock signal. A modified capacitive detection circuit for the charge sharing scheme is proposed, which uses a down literal circuit (DLC) with a floating-gate metal-oxide semiconductor transistor (FGMOS) based on a neuron model. The detection circuit is designed and simulated in a 3.3 V, 0.35 ${\mu}m$ standard CMOS process. Because the proposed circuit does not need a comparator and peripheral circuits, the pixel layout size can be reduced and the image resolution can be improved.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.2
• /
• pp.169-174
• /
• 2014

This paper proposes a novel beehive-shaped reflector for application to light-emitting diode (LED) transceivers for illumination and bi-directional visible light communication (VLC). By using a diffuse propagation model extended to line-of-sight and direct signals, the distribution of illuminance and the path loss of the transceiver are investigated to evaluate the performance of the beehive-shaped reflector. To verify bi-directional communication, a VLC-based image capture system, comprising a complementary metal-oxide semiconductor (CMOS) image sensor and video processor unit, is demonstrated. Real-time images captured by the CMOS camera are successfully transmitted to the monitoring system via a free-space channel at a rate of 115.2 kbps.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1882-1884
• /
• 1996

This paper deals with the lightning surge counter. In order to install the effective surge protective devices, it is important to find the parameters of incident surges. For the purpose of observing the occurrence frequency as a parameter of the amplitude of surge, two type surge counters were designed and fabricated. One is operated by surge currents, and the other is operated by surge voltages. The former consists of current sensor, metal oxide varister (MOV), rectifier, capacitor and electromagnetic counter. The latter consists of rectifier, voltage divider, comparator, photo coupler and counter circuit, and is useful for detecting the surge voltages.

• Journal of Sensor Science and Technology
• /
• v.16 no.4
• /
• pp.313-318
• /
• 2007

Single-wall carbon nanotube field-effect transistors (SWCNT FETs) of top gate structure were fabricated in a conventional metal-oxide-semiconductor field effect transistor (MOSFET) with gate electrodes above the conduction channel separated from the channel by a thin $SiO_{2}$ layer. The carbon nanotubes (CNTs) directly grown using thin Fe film as catalyst by thermal chemical vapor deposition (CVD). These top gate devices exhibit good electrical characteristics, including steep subthreshold slope and high conductance at low gate voltages. Our experiments show that CNTFETs may be competitive with Si MOSFET for future nanoelectronic applications.

• Journal of Sensor Science and Technology
• /
• v.18 no.6
• /
• pp.417-422
• /
• 2009

The problems associated with the synthesis, characterization and application of $SnO_2$-Au nanocomposites for the optimization of conductometric gas sensors have been discussed in this report. Nanocomposites have been synthesized on the surface of $SnO_2$ films using successive ionic layer deposition(SILD) method. It has been shown that the proposed approach to surface modification of metal oxide films is an excellent method for the optimization of the operating characteristics of $SnO_2$-based gas sensors, being developed for the detection of reducing gases as well as ozone.