• 한국재료학회지
• /
• 제13권12호
• /
• pp.801-805
• /
• 2003

To explore the annealing temperature dependence of dielectric properties $Ta_2$$O_{5}$ thin films were prepared by MOCVD(metal-organic chemical vapor deposition) and MOD(metal-organic decomposition). The $Ta_2$$O_{5}$thin films fabricated MOCVD and MOD were annealed in $O_2$at temperature between 600 and 90$0^{\circ}C$. The measured dielectric constant of both films at 100 KHz was the highest value at $650^{\circ}C$ and decreased with increasing annealing temperature above $650^{\circ}C$. Plane-view SEM image showed that the boundary seems to be crack broke out with increasing annealing temperature. It was confirmed that outbreak of boundary influenced a decrease of dielectric constant with increasing annealing temperature. The leakage current density increased with increasing annealing temperature.

• Bulletin of the Korean Chemical Society
• /
• 제18권12호
• /
• pp.1249-1256
• /
• 1997

Single phase La1-xSrxCoO3 (x≤0.2) was synthesized as a uniform sized 100 nm particulates with relatively high surface area of 20-30 m2/g, at low temperature (≥600 ℃), from a polymeric gel precursors prepared by using poly(vinyl alcohol) as homogenizer. No minor phase developed during the crystallization when polymer/metal mole ratio was higher than 3. As the polymer/metal mole ratio was raised in the gel, the amount of carbonaceous residues in the amorphous solid precursor prepared by heating the gel at 300 ℃ increased. Most of the residues were eliminated by exothermic thermal decomposition around 400 ℃. The amount of residual carbon (less than 1%) left in the crystalline La1-xSrxCoO3 decreased as more polymer was used, eliminating detrimental effect which might be posed by using large amount of organic homogenizer. The crystal structure of La1-xSrxCoO3 synthesized at temperature lower than 800 ℃ was observed to be shifted from rhombohedral to more symmetric cubic. The structure shifted back to rhombohedral as the cubic sample was annealed at 1000 ℃.

• 한국지반환경공학회 논문집
• /
• 제11권11호
• /
• pp.27-36
• /
• 2010

본 연구는 정읍시에서 배출되는 하수슬러지, 축산 분뇨, 음식물 쓰레기를 대상으로 Pilot-scale($100m^3$) 초고온 호기성 퇴비화 공정에서의 온도, pH, C/N비, 함수율, 유기물 함량, 그리고 부피 등 물리 화학적 영양 인자를 평가하였다. 각각의 대상 물질은 1차 발효(유기성 폐기물+종균)와 2차 발효(유기성 폐기물+종균+반송 퇴비)로 나누어 수행하였다. 퇴비화가 진행됨에 따라 교반과 송풍만으로 열공급 없이 온도는 1,2차 발효에서 최고온도 $90{\sim}105^{\circ}C$가 되었다. pH, $O_2$, $CO_2$, $NH_3$, 농도 변화는 전형적인 미생물에 의한 유기물 분해 양상을 보여주었으며, 다른 모든 물리 화학적 인자들은 일반 호기성 퇴비화의 성능 이상을 보여주었다. 발효가 완료된 후 퇴비의 중금속 농도는 퇴비 비료 규격 기준 농도에 적합한 것으로 나타났다.

• Membrane and Water Treatment
• /
• 제9권6호
• /
• pp.405-419
• /
• 2018

Persulfates (i.e., peroxymonosulfate and peroxydisulfate) are capable of oxidizing a wide range of organic compounds via direct reactions, as well as by indirect reactions by the radical intermediates. In aqueous solution, persulfates undergo self-decomposition, which is accelerated by thermal, photochemical and metal-catalyzed methods, which usually involve the generation of various radical species. The chemistry of persulfates has been studied since the early twentieth century. However, its environmental application has recently gained attention, as persulfates show promise in in situ chemical oxidation (ISCO) for soil and groundwater remediation. Persulfates are known to have both reactivity and persistence in the subsurface, which can provide advantages over other oxidants inclined toward either of the two properties. Besides the ISCO applications, recent studies have shown that the persulfate oxidation also has the potential for wastewater treatment and disinfection. This article reviews the chemistry regarding the hydrolysis, photolysis and catalysis of persulfates and the reactions of persulfates with organic compounds in aqueous solution. This article is intended to provide insight into interpreting the behaviors of the contaminant oxidation by persulfates, as well as developing new persulfate-based oxidation technologies.

• 한국재료학회지
• /
• 제32권11호
• /
• pp.458-465
• /
• 2022

Interest in the use of semiconductor-based photocatalyst materials for the degradation of organic pollutants in a liquid phase has grown, due to their excellent performance and response to the light source. Herein, we fabricated a NiO-SiC-TiO₂ ternary structured photocatalyst which had reduced bandgap energy, with strong activation under UV-light irradiation. The synthesized samples were examined using XRD, SEM, EDX, TEM, DRS, EIS techniques and photocurrent measurement. The results confirmed that the two types of metal oxides were well bonded to the SiC fiber surface. The junction of the new photocatalyst exhibited a large number of photoexcited electrons and holes. The holes tended to oxidize the water and form a hydroxyl radical, which promoted the decomposition of methylene blue. The close contact between the 2D SiC fiber and metal oxide semiconductors expanded the scope of absorption wavelength, and enhanced the usability of the ternary photocatalyst for the degradation of methylene blue. Among three synthesized samples, the NiO-SiC-TiO₂ showed the best photocatalytic effect, and was considered to have excellent photoelectron transfer due to the synergy effect between the metal oxide and SiC.

• 공업화학
• /
• 제29권4호
• /
• pp.432-439
• /
• 2018

활성탄의 화학적 흡착 및 오존촉매반응의 작용기를 향상시키기 위해 Fe, Co, Mn 및 Pd 금속들을 활성탄에 담지하여 금속촉매 활성탄을 제조하였다. 고급산화공정의 실험결과에서 페놀 분해속도, 용존 오존 분해율 및 TOC (총유기탄소) 제거율은 Pd-AC > Mn-AC > Co-AC > AC > Fe-AC의 순서로 나타났다. BET 분석에서 금속담지활성탄의 물리적 특성은 오존촉매반응에 영향을 미치지 않았으며, 촉매효과는 담지한 금속의 종류에 따라 상이한 결과를 나타내었다. RCT (생성된 OH radical과 오존의 비율) 값 측정은 OH radical과 쉽게 반응하지만 오존과는 매우 느리게 반응하는 probe compound로 알려진 파라-클로로벤조산(p-chlorobenzoic acid)의 분해결과로부터 구할 수 있었으며, 오존단독 공정은 $5.48{\times}10^{-9}$, 활성탄 공정은 $1.47{\times}10^{-8}$로 측정되었고, Fe-AC, Co-AC, Mn-AC 및 Pd-AC 공정은 각각 $2.13{\times}10^{-9}$, $1.51{\times}10^{-8}$, $4.77{\times}10^{-8}$ 및 $5.58{\times}10^{-8}$로 측정되었다.

• 대한환경공학회지
• /
• 제22권10호
• /
• pp.1809-1816
• /
• 2000

본 연구는 상압유통식 반응장치를 이용하여 석유화학공단에서 주로 발생되는 휘발성 유기화합물(volatile organic compound: VOC) 인 methanol의 연소에 대한 다양한 금속-프탈로시아닌의 촉매활성에 관하여 연구하였다. Co-PC의 촉매활성은 air+methanol의 혼합물을 이용하여 전처리한 경우가 air만으로 전처리한 경우보다 더 높았으며, 금속-PC의 촉매활성은 metal free-PC < Zn-PC < Fe-PC < Cu($\alpha$)-PC < Co-PC의 순서 였다. TG/DTA 분석 결과, 금속-PC 의 열분해 용이 성은 metal free-PC < Zn-PC < Cu($\alpha$)-PC < Co-PC < Fe-PC의 순서로 나타었으며, 금속과 프탈로시아닌의 결합특성에 따른 차이로 판단된다. XRD 및 EA 분석결과, 전처리한 후의 Zn-PCS와 metal free-PC는 원래의 결정구조가 거의 유지되었지만, Co-PC, Cu($\alpha$)PC 및 Fe-PC는 원래의 결정구조가 파괴되는 것으로 나타났다. 전처리한 후의 Co-PC는 금속산화물인 $Co_3O_4$의 형태로 존재하였으며, Co-PC의 촉매활성이 가장 우수하였다. Co-PC 상에서 methanol의 촉매연소는 반응물의 농도가 높거나 접촉시간(W/F)이 짧을 경우, 중간생성물로서 HCHO 및 $HCOOCH_3$가 관찰되었다.

• 한국세라믹학회지
• /
• 제51권3호
• /
• pp.139-144
• /
• 2014

Activated carbon fiber (ACF) was modified with MnS nanoparticles to prepare MnS-ACF, and it was employed for preparation of MnS-$ACF/TiO_2$ composites with titanium (IV) n-butoxide (TNB). The properties of MnS-$ACF/TiO_2$ composites were characterized by XRD, SEM, and EDX. EDX results showed the presence of C, O, and Ti as major elements and traces of the metal elements Mn and S. The photocatlytic activity was evaluated by degradation of methyl blue (MB) and methyl orange (MO) dye. The results demonstrated that as-prepared samples could effectively photodegrade MB and MO under UV irradiation. Subsequently, the decomposition of MB solution showed the combined effects of adsorptions by ACF and enhanced photocatalytic effect by $TiO_2$. Finally, the photocatalytic effect increased due to photo-induced-electron absorption effect by ACF and electron trap effect by comodified MnS nanoparticles.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.245-248
• /
• 2003

Randomly oriented ferroelectric cerium-substituted $Bi_4Ti_3O_{12}$ thin films have been prepared by using metal-organic decomposition method. The layered perovskite structure was investigated using annealing for 1 h in the temperature range from $550\;{\sim}\;750\;^{\circ}C$. The structure and morphology of the films were characterized using X-ray diffraction and scanning electron microscopy The $Bi_{3.4}Ce_{0.6}Ti_3O_{12}$ (BCeT) thin films showed a perovskite phase and dense microstructure. The grain size of the BCeT films increasedwith increasing annealing temperature. The hysteresis loops of the films were well defined at temperatures above $600\;^{\circ}C$. The 200-nm-thick BCeT thin films annealed at $650\;^{\circ}C$ showed a large remanent polarization (2Pr) of 59.3 ${\mu}C/cm^2$ at an applied voltage of 10 V. The BCeT thin films showed good fatigue endurance up to $5\;{\times}\;10^9$ bipolar cycling at 5 V and 100 kHz.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.352-355
• /
• 2003

[ $Bi_{3.25}La_{0.75}Ti_3O_{12}$ ] (BLT) thin films were prepared by using metal organic decomposition method onto the LaNiO3 (LNO) bottom electrode. Both the structure and morphology of the films were analyzed by x-ray diffraction (XRD) and atomic force microscope (AFM). Even at low temperatures ranging from 450 to $650^{\circ}C$, the BLT thin films were successfully deposited on LNO bottom electrode and exhibited (117) orientation. The BLT thin films annealed as low as $600^{\circ}C$ showed excellent ferroelectricity, higher remanent polarization and no significant degradation of switching charge at least up to $5{\times}10^9$ switching cycles at a frequency of 100 kHz and 5 V. For the annealing temperature of $600^{\circ}C$, the remanent polarization $P_r$ and coercive field were $23.5\;{\mu}C/cm^2$ and 120 kV/cm, respectively.