• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권2호
• /
• pp.87-91
• /
• 2000

Metal ion complex of poly(N-(2,4-imidazoly)ethyl)maleimide-alt-l-octadecene (IMO-O) polymer used to confirm the possibility of molecular device made by Langmuir-Blodgett(LB) method. Electrical properties of the metal ion complex LB film were investigated using Metal/Insulator/Metal(MIM) structure. In the surface pressure-area($\pi$-A) isotherm of IMI-O polymer, the surface pressure at collapse point has a difference due to the interaction between polymer and metal ions. And the complex between polymer and metal ions could be verified through the investigation by Raman spectroscopy. In the current-voltage(I-V) property, the conductivity change of IMO-O polymer complexes due to the kinds of metal of metal ions couldn't be observed. However, the limiting area of molecules was changed by the concentration of the metal ions and the conductivity was increased with the occupied molecular area.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2005년도 생물공학의 동향(XVI)
• /
• pp.252-256
• /
• 2005

3종의 생물흡착제에 대하여 5가지 중금속 이온 용액의 pH가 $4{\sim}8$일 때 크롬이온은 흡착이 감소하였고 구리이온은 흡착이 증가하였으며, 특정한 실험환경(pH4, $21^{\circ}C$, 120RPM교반)에서 교반시간이 60분일 때 흡착평형이 이루어졌으며 최대흡착율에 도달하였으며, Langmuir흡착 등온식이 Freundlich 흡착 등온식보다 더 높은 상관계수를 나타내며 단일-혼합 중금속 흡착 실험에서 카드뮴과 망간을 제외하고는 모두 80%이상, 납에서 95%의 흡착성능을 보였다.

• 대한화학회지
• /
• 제37권9호
• /
• pp.820-825
• /
• 1993

새로운 HDBPDA 이온교환체, {(4,5) : (13,14)-dibenzo-6,9,12-trioxa-3,15,21-triazabicyclo[15.3.l]heneicosa-(1,17,19)(18,20,21) triene ion exchanger: HDBPDA ion exchanger}의 이온교환용량은 3.8 meq/g이었다. 그리고 이 이온교환체에 대한 알칼리 및 알칼리토금속 이온들의 분포계수를 물과, 여러 농도의 염산용액중에서 측정하였다. 금속이온들의 분포계수는 염산농도의 영향을 거의 받지 않았으나, 대체적으로 염산의 농도가 감소할수록 점진적으로 약간 증가하는 경향을 보였다. 그리고 물속에서의 분포계수가 가장 컸다. HDBPDA 이온교환체를 사용하여 알칼리 및 알칼리토금속 이온들을 컬럼이온교환크로마토그래피로 분리하였으며, 이때 용리액으로 물을 사용하였다. 또한 알칼리 및 알칼리토금속 이온들의 분포계수는 그들 이온들의 이온반경이 증가함에 따라 증가하였다.

• 대한화학회지
• /
• 제40권1호
• /
• pp.50-58
• /
• 1996

일정한 pH에서 Co(II), Ni(II), Sr(II), Cu(II), Fe(III) 및 U(VI) 등의 금속이온농도가 증가할 수록 흄산의 침적율이 증가하였으며, Sr

• 한국염색가공학회지
• /
• 제15권3호
• /
• pp.146-153
• /
• 2003

This article describes the metal ions adsorption of chitosan fibers. The chitosan fibers were manufactured by wet spinning using 2% acetic acid as solvent, 10% aqueous sodium hydroxide as non solvent, and 4%chitosan solution as a solvent. The adsorption characteristics of chitosan fibers towards 100ppm solutions of various metal ions such as Cu(II), Cd(II), Cr(III), Hg(II) were examined at different pH value by ICP-Atomic Emission Spectrometer. The adhesiveness of metallic ions to the chitosan fiber were increased with the increase of pH and the decrease of denier. On the other hand, from pH4, chitosan fiber that is immersed in metal ion aqueous solution of Cu(II) and Cd(II) became homogeneous solution because is dissolved. The adhesiveness of metallic ions to chitosan fiber were found to increased in a sequence of Hg(II)> Cr(III)> Cu(II)> Cd(II). The antimicrobial characteristics of the chitosan fiber by adhered metal ions, virgin chitosan fiber, and cotton fiber were evaluated. The antimicrobial activity of the fibers were increased with the decrease of denier.

• 공업화학
• /
• 제10권1호
• /
• pp.166-172
• /
• 1999

폐수중 중금속 이온을 제거하기 위한 방법으로 키토산 비드에 의한 금속 이온의 고정층 흡착 특성을 조사하였다. 게껍질로부터 키틴을 추출하고 이를 탈아세틸화 반응시켜 키토산을 제조하였다. 키토산은 비드로 만들어 중금속 흡착제로 사용하였다. 키토산 비드에 대한 $Cu^{2+}$, $Co^{2+}$, $Ni^{2+}$ 이온의 단성분 평형 흡착 실험 결과로부터 Freundlich와 Langmuir 흡착등온식을 결정하였다. 흡착등온식에 의하면 키토산 비드에 대한 중금속 이온의 흡착 세기는 $Cu^{2+}$>$Co^{2+}$>$Ni^{2+}$의 순서로 나타났다. 키토산 비드에 대한 중금속 이온의 단성분 또는 다성분계 고정층 흡착 실험으로부터 흡착 파과곡선을 구하였다. 단성분 흡착등온식으로 다성분 흡착 평형을 예측할 수 있는 IAS (ideal adsorbed solution) 이론을 적용하여 LDFA (linear driving force approximation)에 의한 고정층 흡착 모델식을 수치해 기법으로 모사하여 실험결과와 비교하였다. LDFA에 의한 모델식을 적용한 결과 키토산 비드에 대한 중금속 이온의 단성분 및 다성분계 고정층 흡착거동을 잘 모사할 수 있었다.

• 한국환경과학회지
• /
• 제20권10호
• /
• pp.1337-1345
• /
• 2011

The removal performances of divalent heavy metal ions ($Pb^{2+}$, $Cu^{2+}$, $Cd^{2+}$, $Sr^{2+}$ and $Mn^{2+}$) were studied using the Na-P1 zeolite synthesized from Jeju scoria in the batch and continuous fixed column reactor. The uptakes of heavy metal ions by synthetic Na-P1 zeolite decreased in the order of $Pb^{2+}$ > $Cu2^{2+}$ > $Cd^{2+}$ > $Sr^{2+}$ > $Mn^{2+}$ based on the selectivity of each ion to ionic exchange site of Na-P1 zeolite for single and mixed solutions in batch or continuous fixed column reactor. For mixed solution, each heavy metal ion uptake was lower than that in single solution, and especially the uptake for $Mn^{2+}$ decreased greatly. In batch reactor, the uptakes of heavy metal ions by synthetic Na-P1 zeolite were described by Freundlich or Langmuir equation, but they followed the former better than the latter. In continuous fixed column reactor, the maximum ion exchange capacity obtained for each of heavy metal ions, was about 90----- of that in batch reactor. The uptakes of heavy metal ions by synthetic Na-P1 zeolite increased with the increase of initial heavy metal concentration and solution pH, and the decrease of the amount and particle size of synthetic zeolite.

• Bulletin of the Korean Chemical Society
• /
• 제29권3호
• /
• pp.567-570
• /
• 2008

A new pyrene appended diaza-18-crown-6 ether derivative 1 has been prepared and its fluoroionophoric properties toward transition metal ions were investigated. Compound 1 exhibited a high Hg2+-selectivity over other transition metal ions as well as alkali and alkaline earth metal ions in aqueous acetonitrile solution. The ratiometric analysis of the monomer and excimer emissions of pyrene successfully signals the presence of Hg2+ ions. The detection limit for Hg2+ ions was found to be 3.1 ´ 10-6 M in 50% aqueous acetonitrile solution at pH 8.1. Competition experiments also suggest that the compound could be utilized as a selective and sensitive fluorescent chemosensor for the analysis of micromolar Hg2+ ions in physiological and environmental samples.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.178-178
• /
• 2016

Every display is equipped with a cover glass to protect the underneath displaying devices from mechanical and environmental impact during its use. The strengthened glass such as Gorilla glass.$^{TM}$ has been exclusively adopted as a cover glass in many displays. Conventionally, the strengthened glass has been manufactured via ion-exchange process in wet salt bath at high temperature of around $500^{\circ}C$ for hours of treatment time. During ion-exchange process, Na ions with smaller diameter are substituted with larger-diameter K ions, resulting in high compressive stress in near-surface region and making the treated glass very resistant to scratch or impact during its use. In this study, PIIID (plasma immersion ion implantation and deposition) technique was used to implant metal ions into the glass surface for strengthening. In addition, due to the plasmonic effect of the implanted metal ions, the metal-ion implanted glass samples got colored. To implant metal ions, plasma immersion ion implantation technique combined with HiPIMS method was adopted. The HiPIMS pulse voltage of up to 1.4 kV was applied to the 3" magnetron sputtering targets (Cu, Ag, Au, Al). At the same time, the sample stage with glass samples was synchronously pulse-biased via -50 kV high voltage pulse modulator. The frequency and pulse width of 100 Hz and 15 usec, respectively, were used during metal ion implantation. In addition, nitrogen ions were implanted to study the strengthening effect of gas ion implantation. The mechanical and optical properties of implanted glass samples were investigated using micro-hardness tester and UV-Vis spectrometer. The implanted ion distribution and the chemical states along depth was studied with XPS (X-ray photo-electron spectroscopy). A cross-sectional TEM study was also conducted to investigate the nature of implanted metal ions. The ion-implanted glass samples showed increased hardness of ~1.5 times at short implantation times. However, with increasing the implantation time, the surface hardness was decreased due to the accumulation of implantation damage.

• 공업화학
• /
• 제10권2호
• /
• pp.218-224
• /
• 1999

원자로 정지시 혼상 탈염기의 최적 운전방법을 제안할 목적으로 산성-산화성 분위기에서 저농도의 Ni, Co 및 Ag 이온이 함유된 모의 냉각재 용액의 연속식 이온교환특성을 연구하였다. 금속 이온의 제거 용량에 미치는 양이온 교환수지 형태의 효과로서 $H^+$형 수지의 성능은 $Li^+$형 수지의 성능보다 약 6% 정도 높은 것으로 나타났다. 혼합층 이온교환 방법인 양이온과 음이온 수지의 혼합은 비혼합시와 비교하여 금속 이온들의 제거 용량에는 영향을 미치지 않았으나 금속 이온들의 파과곡선의 기울기를 매우 조금 증가시켰다. 냉각재의 산성-산화성 분위기와 관계된 영향으로서 붕산의 첨가는 금속 이온들의 파과곡선의 기울기를 매우 작게 감소시킨 반면, 과산화수소의 첨가는 금속이온들의 제거 용량을 약간 감소시켰다.