• 제목/요약/키워드: Metal cutting

검색결과 458건 처리시간 0.025초

TEM 정밀 시편 제작용 몰리브덴 합금 미세 고정 부품의 제작을 위한 절삭 가공 방법에 관한 연구 (A study on machining method about molybdenum alloy micro fixing part for TEM precision specimen.)

  • 김기범;이창우;이해진;함민지;김건희
    • Design & Manufacturing
    • /
    • 제11권3호
    • /
    • pp.19-24
    • /
    • 2017
  • In these days, increase requirement of TEM (Transmission Electro Microscope) in not only scientific field but also industrial field. Because TEM can measure inner-structure of specimen a variety of materials like metal, bio. etc. When use TEM, specimen should be thin about 50nm. So making for thin specimen, use Ion milling device that include specimen holder. The holder generally made of Aluminium Aluminium holder is worn away easily. For this reason, using time of ion milling with aluminum holder is too short. To solve the problem, we replace aluminium holer to molybdenum alloy holder. In this paper, we design molybdenum alloy holer for CAM and modify CAD modeling for effective machining process. So we array a specimen 3 by 4 and setup orientation for one-shot machining process. Next we make a CAM program for machining. we making a decision two machining strategy that chose condition of tool-path method, step-down, step-over. etc. And then conduct machining using CNC milling machining center. To make clear difference between case.1 and case.2, we fixed machining conditions like feed-rate, main spindle rpm, etc. After machining, we confirm the condition of workpiece and analysis the problems case by case. Finally, case.2 work piece that superior than case.1 cutting with WEDM because that method can not ant mechanical effect on workpiece.

기계적 가공과 무전해 선택적 증착기술을 이용한 나노/마이크로 금속패턴 제작에 관한 연구 (A Study on Nano/Micro Pattern Fabrication of Metals by Using Mechanical Machining and Selective Deposition Technique)

  • 조상현;윤성원;강충길
    • 한국정밀공학회지
    • /
    • 제23권8호
    • /
    • pp.171-177
    • /
    • 2006
  • This study was performed as a part of the research on the development of a maskless and electroless process for fabricating metal micro/nanostructures by using a nanoindenter and an electroless deposition technique. $2-{\mu}m$-deep indentation tests on Ni and Cu samples were performed. The elastic recovery of the Ni and Cu was 9.30% and 9.53% of the maximum penetration depth, respectively. The hardness and the elastic modulus were 1.56 GPa and 120 GPa for Ni and 1.51 GPa and 104 GPa for Cu. The effect of single-point diamond machining conditions such as the Berkovich tip orientation (0, 45, and $90^{\circ}$ ) and the normal load (0.1, 0.3, 0.5, 1, 3, and 5 mN), on both the deformation behavior and the morphology of cutting traces (such as width and depth) was investigated by constant-load scratch tests. The tip orientation had a significant influence on the coefficient of friction, which varied from 0.52-0.66 for Ni and from 0.46- 0.61 for Cu. The crisscross-pattern sample showed that the tip orientation strongly affects the surface quality of the machined are a during scratching. A selective deposition of Cu at the pit-like defect on a p-type Si(111) surface was also investigated. Preferential deposition of the Cu occurred at the surface defect sites of silicon wafers, indicating that those defect sites act as active sites for the deposition reaction. The shape of the Cu-deposited area was almost the same as that of the residual stress field.

특허(特許)와 논문(論文)으로 본 텅스텐카바이드(WC) 재활용(再活用) 기술(技術) 동향(動向) (Trend on the Recycling Technologies for the used Tungsten Carbide(WC) by the Patent and Paper Analysis)

  • 정진기;이재천;박상우;강경석
    • 자원리싸이클링
    • /
    • 제21권1호
    • /
    • pp.82-92
    • /
    • 2012
  • 텅스텐카바이드는 금속절단 공구, 드릴의 날, 광산공구, 군사무기 재료, 화학원료, 촉매, 내마모성재료, 제트엔진 터빈 블레이드 등 다양한 용도로 사용된다. 요즘 경제적인 측면과 효율적인의 측면에서 텅스텐카바이드 재활용 기술이 넓게 연구되었다. 이 논문에서는 텅스텐카바이드 재활용 기술에 대하여 1969년부터 2011년까지 공개/등록된 미국, 일본, 유럽, 한국의 특허와 SCI급 논문을 조사하였다. 키워드를 이용하여 조사하였고 필터링 하여 특허와 논문을 수집하여 연도별, 국가별, 기관별, 기술별로 분석하였다.

전시와 권력: 1960~1970년대 한국 현대미술에 작용한 권력 (Power in Exhibitions: The Artworks and Exhibitions in the 1960s through the 1970s)

  • 김형숙
    • 미술이론과 현장
    • /
    • 제3호
    • /
    • pp.9-34
    • /
    • 2005
  • Contemporary Korean art in the 1960s and the 1970s reflects the social and political contexts in Korea from the 5 16 revolution through the Yoo Shin period. This paper investigates whether art has been free from power or not. It examines the power embedded in contemporary Korean art in the 1960s and the 1970s. This paper examines the historical moments of the Korean Art Exhibition, focusing on the complications between the abstract and figurative artworks of the 1960s. One of the significant art exhibitions since the 8 15 liberation of Korea, the Korean Art Exhibition witnessed conflict among Korean artists who wanted to have power in the art world of Korea. Institutional contradiction based on factionalism and conservatism prevailed in the Korean Art Exhibition was attacked by the avant-garde young artists in the 1960s. With the contact of Abstract Expressionism, young artists' generation participated in the The Wall Exhibition. This exhibition challenged and established moral principles and visualized individual expression and creation similar to the Informal movement in the West. In the world of the traditional painting of Korea, the Mook Lim Exhibition of 1960, organized by young artists of traditional painting, advocated the modernization of Soo Mook paintings. Additionally, abstract sculptures in metal engraving were the new trends in the Korean Art Exhibition. In the 1970s, the economic development and establishment of a dictatorial government made the society stiffen. Abstract expression died out and monochrome painting was the most influential in the 1970s. After the exhibition of Five Korean Artists, Five White Colors in the Tokyo Central Art Museum in 1976, monochrome paintings were formally discussed in Korea. 'Flatness' 'physicality of material' 'action' 'post-image' 'post-subjectivity' and 'oriental spirituality' were the critical terms in mentioning the monochrome paintings of the 1970s. 'Korean beauty' was discussed, focusing on the beauty of white which was addressed by not only Yanagi Muneyoshi but also the policy of national rehabilitation under the Yoo Shin government. At this time, the monochrome paintings of the 1970s in Korea, addressing art for art's sake, cutting of communication with the masses, and elitism, came to be authorized.

  • PDF

한국원자력연구원의 해체기술 개발 현황 및 향후 전망 (The Status and Prospect of Decommissioning Technology Development at KAERI)

  • 문제권;김선병;최왕규;최병선;정동용;서범경
    • 방사성폐기물학회지
    • /
    • 제17권2호
    • /
    • pp.139-165
    • /
    • 2019
  • 한국원자력연구원에서 개발 중인 해체기술 현황 및 전망에 대해 기술하였다. 특히, 해체의 핵심기술인 제염, 원격절단, 해체 폐기물처리 및 부지 복원 분야를 중점적으로 다루었다. 제염기술로는 부품제염과 원자력시스템제염 부분을 고찰하였고, 원격절단기술 관련해서는 절단기술, 원격제어 및 해체공정 모사기술이 다루어졌다. 해체 폐기물처리기술 관련해서는, 비록 해체 후 다양한 폐기물이 발생하지만, 주 폐기물인 금속, 가연성폐기물과 난처리성 특수 폐기물인 고염 고방사성 폐액, 유기혼성폐기물 및 우라늄 복합폐기물 처리기술 등을 주로 기술하였다. 마지막으로, 해체부지 복원 분야에서는 방사선 측정, 부지재이용의 안전성평가 그리고 부지 복원기술 등을 중점적으로 기술하였다.

터빈동 철골구조물 발파해체 시공사례 (A Case Study on Explosive Demolition of Turbine Building of Steel Frame Structure)

  • 박훈;남성우;노유송;석철기
    • 화약ㆍ발파
    • /
    • 제40권4호
    • /
    • pp.35-46
    • /
    • 2022
  • 오래된 산업단지를 해체하고 해체한 산업부지를 원래의 자연환경으로 복원하는 공사가 진행 중인 가운데, 본 논문에서는 노후화된 산업단지 내의 대형 철골구조물 중 하나인 터빈동을 발파해체공법 중 점진붕괴공법을 적용하여 해체한 사례를 소개한다. 터빈동을 절단 해체하기 위해 금속 제트가 발생하는 장약용기를 사용하였다. 발파구간 중 절단 두께가 두꺼운 부분은 가스와 산소 불꽃 또는 아크열에 의해 깊은 홈을 파는 방법인 가우징을 적용하여 절단 두께를 30mm 이하로 조절하였다. 터빈동 발파해체에 사용한 총 장약량은 175kg, 전자뇌관 165발, 장약용기 124개이다. 발파해체 결과, 터빈동은 예측한 방향으로 붕괴하였으며, 주변 시설물에 피해 없이 발파해체를 완료하였다.

Fractographic 분석을 통한 HEROShaper 니켈티타늄 전동 파일의 피로파절에 미치는 표면결함의 역할 (The Effect of Surface Defects on the Cyclic Fatigue Fracture of HEROShaper Ni-Ti rotary files in a Dynamic Model: A Fractographic Analysis)

  • 이정규;김의성;강명희;금기연
    • Restorative Dentistry and Endodontics
    • /
    • 제32권2호
    • /
    • pp.130-137
    • /
    • 2007
  • 본 연구의 목적은 니켈티타늄 전동파일의 피로파절에 있어서 표면 결함의 역할을 규명하고자 fatigue tester에서 반복적 인 fatigue force를 부여한 후 파절된 단면을 주사전자현미 경으로 관찰하여 파절 역학을 규명하는 것이다. 총 45개의 #30/.04 taper와 21 mm의 HEROShaper 니켈-티타늄 전동파일을 15개씩 3개의 군으로 분류하였다. 제 1군은 결함이 없는 새 HEROShaper파일, 제 2군은 제조과정에서 metal rollover나 machining marks와 같은 표면결함을 갖는 HEROShaper파일, 제 3군은 임상에서 4- 6개의 구치부 근관의 확대에 사용한 HEROShaper 파일을 사용하였다. 모든 파일들은 회전속도(300 rpm)와 pecking distance (3 mm)가 일정하게 맞춘 fatigue tester에서 파절될 때까지 시간을 측정한 후 통계분석을 통해 각 군간의 유의성을 분석하였고, 파절 단면의 farctographic analysis를 통해 파절역학을 규명하고자 하였다 실험결과 평균 파절시간에 있어서 group 1과 2, group 1과 3사이에는 통계학적으로 유의할 만한 차이가 있었으나 (p<0.05), group 2와 3사이에는 통계학적인 차이가 없었다. Fractographic analysis 결과 대부분의 파절면에서 microvoid와 dimple 소견을 갖는 ductile fracture양상이 관찰되었다. 또한 brittle fracture가 일어난 파절면에서는 파절선 전방에 수 많은 striation들이 관찰되었고 transgranular 및 intergranular cleavage 소견도 보였다. 표면결함이 있는 제 2, 3 군의 파절단면에서는 모든 시편에서 표면결함이 관찰되었다. 이와 같은 결과로 미루어 보아 표면결함이 반복 피로파절에서 미세균열의 기시점으로 중요한 역할을 하며 fractography분석법은 Ni-Ti 파일의 파절역학을 규명하는데 유용함을 알 수 있었다.

금속가공유를 취급하는 남성 근로자의 접촉피부염 (Contact dermatitis among male workers exposed to metalworking fluids)

  • 진영우;이준영;김은아;박승현;채창호;최용휴;김규상
    • Journal of Preventive Medicine and Public Health
    • /
    • 제30권2호
    • /
    • pp.381-391
    • /
    • 1997
  • 산업장에서 사용되는 오일의 종류와 그 폭로 형태의 차이에 따른 피부질환의 유병률과 접촉성 피부질환의 주요특성을 파악하기 위하여 사용오일의 분석, 1회의 방문진찰과 2회에 걸친 설문조사를 실시하였으며, 아래와 같은 결과를 얻었다. 1. 비수용성 절삭유의 분석결과, 탄소수 12-20개 사이의 지방탄화수소(do, tri, tetra... decane)가 49.04%였으며, methy-naphthalene 등의 방향족이 14.90% 기타지방 및 방향족탄화수소화합물이 36.04%였으며, 방청유의 분석결과 대부분(90.99%)이 탄소수 6-9개 사이의 지방족 화합물로 구성되어 있으며, 일부 알콜 및 에스테르계 화합물도 포함되어 있어 두 오일은 서로 다른 물질이며, 따라서 자극성도 다를 것으로 생각된다. 2. 피부과적 진찰 결과, 전 연구대상에서 전체 피부 질환의 빈도(시점유병률)는 17명(연구대상자 100명당 53.1)이었다. 접촉피부염, 오일 여드름과 모낭염의 빈도(시점유병률)는 7명(12.7), 11명(20.0)이었으며, 광알러지성 피부염, 염소성 여드름, 종양, 피부변색은 관찰되지 않았다. 3. 자기기입식 설문조사 결과, 두 군에서 접촉피부염의 누적유병률과 1년간 기간유병률은 연구대상자 100명당 28.4, 16.7와 15.3, 13.0로서 차이를 보였으나, 통계학적으로 유의하지 않았고(p>0.05), 연령과 접촉 기간에 따른 차이는 없었다(p>0.05). 4. 발생까지의 기간은 절삭유접촉군의 경우 4개월 미만이 8명(22.9%)이었고, 26명(74.3%)이 2년 이내인 것으로 나타났으나, 방청유접촉군의 경우 응답자 6명 중 4명(66.7%)이 2년 이후로 대답해 군간에 뚜렷한 차이를 보였으며(p<0.05), 10년 이상인 경우도 절삭유 접촉군에서 2명, 방청유접촉군에서 1명이 있었다. 호발계절은 절삭유접촉군의 경우 응답자 41명중 16명(42.1%)이 여름에 가장 많은 것으로 답하였으나 방청유접촉군의 경우 계절에 따른 차이를 보이지 않았다(p>0.05). 5. 유병기간은 양 군에 차이가 없었으며(p>0.05), 68.6%가 1개월 이내에 회복되는 것으로 나타났고, 6개월이상 잘 낫지 않는 정우도 3명(7.9%)이 있었다. 재발횟수는 절삭유접촉군에서는 1년에 수회가 응답자 15명(44.1%)로 가장 많았으나, 방청유접촉군에서는 1회로 끝난 경우가 3명(42.9%)로 가장 많았고, 전체 응답자 41명중 26명(63.4%)이 1년에 1회 이상 재발하는 것으로 나타났다. 6. 주요 발생형태로는 홍반성 구진이 절삭유접촉군과 방청유접촉군에서 각각 21명(60.0%), 6명(85.7%), 전체적으로는 27명(64.3%)으로서 가장 많았으며, 수포 형성이 각각 12명(34.3%), 1명(14.3%), 전체적으로 13명(31%)로 나타났다. 7. 처음 접촉피부염 발생시 보호구를 착용했다는 응답이 38명(86.8%)으로 대부분이었으나, 24명(68.6%)이 보호구의 종류로서 면장갑을 착용한다고 하였으며, 그 외 고무장갑이나 비닐장갑을 이용했던 것으로 나타났다. 8. 피부염발생시 치료 여부에 대해 22명(51.1%)이 약국이나 병원을 이용하는 것으로 나타났으며, 개인위생에 신경 쓴다, 별 조치를 취하지 않는다, 사내의무실을 이용한다가 각각 11명(27.9%), 6명(14.0%), 3명(7.0%)로 대부분 자비를 부담하여 치료를 하는 것으로 나타났다. 9. 피부염의 발생에 대해 느끼는 정도를 묻는 질문에 대해 절삭유접촉군에서는 16명(47.1%)이 심각하다라는 응답을 하였으나, 방청유접촉군에서는 응답한 6명 모두가 별로 심각하지 않다라고 하여 대조를 보였다. 이상의 결과, 오일로 인한 사업장의 피부질환조사 시에는 접촉 수준(빈도와 양), 접촉물질의 종류를 정확히 파악하는 것이 중요하고, 적절한 조사시기(계절)가 고려되어야 하며, 접촉피부염의 예방을 위해서는 적절한 보호구와 보건교육이 필요하다는 것을 알 수 있었다. 또한 대규모 집단을 대상으로 접촉피부염의 유병률 특히, 기간유병률 등을 파악하는데 있어, 설문 조사가 주요한 도구가 될 수 있으므로, 이에 대한 연구가 필요하다고 생각된다.

  • PDF

동물유체의 해체장소와 방법에 관한 일고찰-삼한 및 삼국시대의 조개더미 자료를 중심으로 (A Study on the Butchering place and method of Animal remains-centering around at the shell middens of proto-three kingdoms and three kingdoms)

  • 유병일
    • 고문화
    • /
    • 제70호
    • /
    • pp.63-88
    • /
    • 2007
  • 이 글은 삼한 및 삼국시대의 조개더미에서 출토하는 원래의 모습에서 변형된 동물유체를 대상으로 변형, 즉 해체가 있었던 장소와 도구에 대하여 살펴보는 것이 그 목적이다. 유적은 발굴된 동물유체에 대하여 분석이 이루어진 유적을 대상으로 하였으며, 조가비 전체와 포유류 가운데 사슴을 대표적으로 살펴보았다. 그 결과 조가비의 해체는 서식장소에서 이루어진 것이 아니라 취락으로 가져온 후 주거지 내부와 주거지의주변장소에 해체작업을 하였으며, 사슴의 경우도 포획장소보다 주거지 주변의 공공장소나 특정장소, 그리고 주거지 내부에서 이루어졌음을 알 수 있었다. 해체방법은 조가비의 경우는 백합으로 대표되는 도끼발류는 주로 손칼 같은 도구로 껍질을 비틀어 속살을 꺼내거나 삶은 후에 속살을 꺼내는 방법이 있으며, 간혹 큰 백합과 떡조개의 경우 가운데를 깨어서 속살을 꺼내기도 한다. 배발류의 대표적인 피뿔고둥은 꼭대기, 몸통 일부를 돌로 깨어서 속살을 꺼내기도 하며 혹은 삶아서 바늘 및 침 같은 도구로 속살을 꺼내기도 한다. 전복과 같은 종은 살이 껍질에 단단히 고착되어 있으므로 예리하고 적당한 금속도구로 살을 끄집어내며 크기가 작은 대수리, 두드럭고둥, 눈알고둥, 밤고둥 등은 살은 후에 꼭지부위를 깨뜨려 빨아서 살을 꺼내거나 완전한 상태에서 침과 바늘로 살을 꺼내기도 한다. 사슴과 같은 대형포유류는 사슴 자체가 여러 용도로 사용되는 요소를 충분히 고려하여 정교한 방법으로 철정, 철부, 쇠손칼 등으로 가죽벗기기, 내장꺼내기, 앞다리 및 뒷다리부위 자리기, 관절부위 자르기/고기 바르기, 골수추출 방법으로 해체하였으며, 가죽벗기기에서 앞/뒷다리부위 자르기는 주거지 주변의 장소에서 해체하였으며, 관절부위 자르기에서 골수추출은 주거지에서 이루어진 듯하다. 해체도구는 당시 사람들이 의식주 생활에 많이 사용되는 손칼, 철정, 쇠도끼, 망치돌, 받침돌, 바늘과 침, 그리고 예리한 도구 등을 대상물에 따라 적절히 사용하였음이 밝혀졌다.

  • PDF

Sn 및 Cu를 첨가한 치과 주조용 Co-Cr-Mo계 합금제조 및 용해과정 분석 (Manufactures of dental casting Co-Cr-Mo based alloys in addition to Sn, Cu and analysis of infrared thermal image for melting process of its alloys)

  • 강후원;박영식;황인;이창호;허용;원용관
    • 대한치과기공학회지
    • /
    • 제36권3호
    • /
    • pp.141-147
    • /
    • 2014
  • Purpose: Dental casting #Gr I (Co-25Cr-5Mo-3Sn-1Mn-1Si), #Gr II (Co-25Cr-5Mo-5Cu-1Mn -1Si) and #Gr III (Co-25Cr-5Mo-3Sn-5Cu-1Mn-1Si) master alloys of granule type were manufactured the same as manufacturing processes for dental casting Ni-Cr and Co-Cr-Mo based alloys of ingot type. These alloys were analyzed melting processes with heating time of high frequency induction centrifugal casting machine using infrared thermal image analyzer. Methods: These alloys were manufactured such as; alloy design, the first master alloy manufatured using vacuum arc casting machine, melting metal setting in crucible, melting in VIM, pouring in the mold of bar type, cutting the gate and runner bar and polishing. These alloys were put about 30g/charge in the ceramic crucible of high frequency induction centrifugal casting machine and heat, Infrared thermal image analyzer indicated alloys in the crucible were set and operated. Results: The melting temperatures of these alloys measuring infrared thermal image analyzer were decreased in comparison with remanium$^{(R)}$ GM 800+, vera PDI$^{TM}$, Biosil$^{(R)}$ f, WISIL$^{(R)}$ M type V, Ticonium 2000 alloys of ingot type and vera PDS$^{TM}$(Aabadent, USA), Regalloy alloys of shot type. Conclusion: Co-Cr-Mo based alloy in addition to Sn(#Gr I alloy) were decreased the melting temperature with heating time of high frequency induction centrifugal casting machine using infrared thermal image analyzer.