• 월간포장계
• /
• 통권124호
• /
• pp.78-81
• /
• 2003

• 대한기계학회논문집A
• /
• 제28권2호
• /
• pp.174-180
• /
• 2004

If Fiber Reinforced Metal Laminates(FRMLs) were delaminated, the decrease of stiffness and fiber bridging effect would result in the sudden aggravation of fatigue characteristics. It was reported that the delamination of FRMLs resulted from the crack of metal layers and that it depended on the crack growth. While cracks were made in FRMLs containing a saw-cuts under fatigue loading, cracks could be produced or not in FRMLs with circular holes under the same condition. When the FRMLs with the circular holes produce not the crack but the delamination, it is not possible to analyze it by the conventional fracture parameters expressed as the function of the crack. And so, this research suggests a new analytical model of the delamination to make the comparison of the delamination behavior possible whenever the cracks occur or not. Therefore, a new analytical model called Pseudo Crack Model(PCM) was suggested to compare the delaminations whether cracks were made or not. The relationship between the crack energy consumption rate( $E_{crack}$) and the delamination energy consumption rate( $E_{del}$) was discussed and it was also known that the effect of $E_{del}$ was larger than that of $E_{crack}$.

• 자원리싸이클링
• /
• 제20권6호
• /
• pp.3-18
• /
• 2011

우리나라의 도시광산 재자원화실태와 전망을 파악하기 위하여 금속소비량을 산출하였다. 년간 금속소비량으로부터 금속 축적량을 추정할 수 있고, 도시광산자원을 전망할 수 있다. 금속소비량을 산출함에 있어 다양한 자료 즉 비철협회, 철강협회, 관세청 HS 코드, 연구용역 보고서, 학술회의자료 및 생산회사 탐문자료 등을 인용하였다. 도시광산개발의 요건(key point)을 설명하기 위하여 T.E.Graedel에 의해서 작성된 표(Principle Uses and Recycling Potential of Metals in the Periodic Table)를 인용하였다.

• ETRI Journal
• /
• 제30권6호
• /
• pp.783-789
• /
• 2008

A bio-inspired vision chip for edge detection was fabricated using 0.35 ${\mu}m$ double-poly four-metal complementary metal-oxide-semiconductor technology. It mimics the edge detection mechanism of a biological retina. This type of vision chip offer several advantages including compact size, high speed, and dense system integration. Low resolution and relatively high power consumption are common limitations of these chips because of their complex circuit structure. We have tried to overcome these problems by rearranging and simplifying their circuits. A vision chip of $160{\times}120$ pixels has been fabricated in $5{\times}5\;mm^2$ silicon die. It shows less than 10 mW of power consumption.

• 센서학회지
• /
• 제30권2호
• /
• pp.82-87
• /
• 2021

In this paper, we propose a high-speed, low-power complementary metal-oxide semiconductor (CMOS) binary image sensor featuring a gate/body-tied (GBT) p-channel metal-oxide-semiconductor field-effect transistor (PMOSFET)-type photodetector based on a double-tail comparator. The GBT photodetector forms a structure in which the floating gate (n+ polysilicon) and body of the PMOSFET are tied, and amplifies the photocurrent generated by incident light. The double-tail comparator compares the output signal of a pixel against a reference voltage and returns a binary signal, and it exhibits improved power consumption and processing speed compared with those of a conventional two-stage comparator. The proposed sensor has the advantages of a high signal processing speed and low power consumption. The proposed CMOS binary image sensor was designed and fabricated using a standard 0.18 ㎛ CMOS process.

• 한국환경보건학회지
• /
• 제46권6호
• /
• pp.655-666
• /
• 2020

Objectives: The purpose of this study was to evaluate urinary arsenic concentrations by arsenic species and to identify related factors among local residents near abandoned metal mines in Korea. Methods: Among the subjects of the Health Survey of Residents Near Abandoned Metal Mines for 2013-2017, 664 people were enrolled in this study. Urinary arsenic species analysis was performed using ICP/MS. Result: The geometric means (95% Confidence Interval) by urinary arsenic species were 0.15 (0.13-0.17) ㎍/L for AsIII, 0.64 (0.55-0.75) ㎍/L for AsV, and 1.21 (1.05-1.40) ㎍/L for inorganic arsenic. The geometric means of urinary MMA and DMA were 1.58 (1.35-1.86) ㎍/L and 77.93 (72.61-83.63) ㎍/L, respectively, and that of organic arsenic was 83.15 (77.80-88.88) ㎍/L. The concentration of inorganic arsenic in the group using groundwater as drinking water was 1.36 (1.13-1.64) ㎍/L, which was statistically significantly higher than the 1.00 (0.80-1.25) ㎍/L in the other drinking water groups. Regarding rice consumption, the concentration of inorganic arsenic in urine in the group whose consumption was more than half rice produced in the residential area was 1.32 ㎍/L, which was statistically significantly higher than that of the 1.12 ㎍/L for the group whose consumption was less than half. Conclusion: In the analysis of the factors affecting the urinary inorganic arsenic concentration of the residents of the abandoned metal mine area, the use of groundwater as drinking water and consumption of rice produced in the residential area were considered related factors.

• 전자공학회논문지C
• /
• 제34C권12호
• /
• pp.20-27
• /
• 1997

In this paper, a multiplying digital-to-analog converter (MDAC) circuit for low-power high-resolution CMOS algorithmic A/D converters (ADC's) is proposed. The proposed MDAC is designed to operte properly at a supply at a supply voltge between 3 V and 5 V and employs an analog0domain power reduction technique based on a bias switching circuit so that the total power consumption can be optimized. As metal-to-metal capacitors are implemented as frequency compensation capacitors, opamps' performance can be varied by imperfect process control. The MDAC minimizes the effects by the circuit performance variations with on-chip tuning circuits. The proposed low-power MDAC is implementd as a sub-block of a 10-bit 200kHz algorithmic ADC using a 0.6 um single-poly double-metal n-well CMOS technology. With the power-reduction technique enabled, the power consumption of the experimental ADC is reduced from 11mW to 7mW at a 3.3V supply voltage and the power reduction ratio of 36% is achieved.

• 한국기계가공학회지
• /
• 제21권1호
• /
• pp.22-27
• /
• 2022

In accordance with the growing trend of decommissioning nuclear facilities, research on the cutting process is actively proceeding worldwide. In general, a thermal cutting process, such as plasma cutting is applied to decommissioning a nuclear reactor pressure vessel (RPV). Plasma cutting has the advantage of removing the radioactive materials and being able to cut thick materials. However, when operating under water, the molten metal remains in the cut plane and re-solidifies. Hence, cutting is not entirely accomplished. For these environmental reasons, it is difficult to cut thick metal. The contact arc metal cutting (CAMC) process can be used to cut thick metal under water. CAMC is a process that cuts metal using a plate-shaped electrode based on a high-current arc plasma heat source. During the cutting process, high-pressure water is sprayed from the electrode to remove the molten metal, known as rinsing. As the CAMC is conducted without using a shielding gas, such as Argon, the electrode is consumed during the process. In this study, CAMC is introduced as a method for dismantling nuclear vessels and the relationship between the metal removal and electrode consumption is investigated according to the cutting conditions.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 1995년도 추계학술발표회논문집
• /
• pp.39-46
• /
• 1995

LCD. projector back light용 metal halide lamp는 최근 LCD의 고신장세에 편승 매년 30% 정도 수요가 증가하고있는 첨단제품으로 국내에서는 전량 수입에 의존하고 있는 실정이며 본 연구에서는 다음과 같은 기술 성과를 거두었다. 1. LCD projector back light용 150W metal halide lamp및 전자식 안정기의 국산화 완료 2. 초소형 metal halide lamp의 설계기술 및 제작 기반기술 확보 3. Metal halide lamp용 전자식 안정기의 설계기술 확보

• ETRI Journal
• /
• 제31권6호
• /
• pp.695-702
• /
• 2009

We propose a lens-drive unit composed of an ionic polymer-metal composite (IPMC) for an auto-focus compact camera module in cellular phones to solve the power consumption problem of voice coil motors which are widely used in commercial products. In this research, an IPMC incorporated into a lens-drive unit is designed to implement a large displacement in low-power consumption by using an anisotropic plasma treatment. Experimental results show that a camera module containing IPMCs can control and maintain the position of the lens by using proportional integral derivative control with a photo-reflective position sensor despite the non-linear actuation behavior of IPMCs. We demonstrate that the fabrication and commercialization of a lens actuator that has a large displacement and low power consumption using IPMCs is possible in the near future.