• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.144-144
• /
• 2017

Micronutrients such as zinc (Zn), iron (Fe), manganese (Mn) have important roles for development and growth in plants but it also have roles in animals and humans. In previous studies, a Korean weedy rice, KH2J was selected to have tolerance to heavy metal, lead (Pb) compared with a cultivar, Milyang23. To identify QTLs for micronutrients concentration in grain, an F2 population (120 plants) were developed from a cross between KH2J and an indica rice cultivar, Milyang23. To measure the concentration of eight ions, Zn, Fe, Mn, Pb, calcium (Ca), copper (Cu), cadmium (Cd) and arsenic (As), grains were collected and digested with 65% nitric acid, and the ion contents were measured using inductively coupled plasma mass spectrometry. A total 27 putative quantitative trait loci (QTLs) were detected on 12 chromosomes by single point analysis and 22 putative QTLs were detected by composite interval mapping. The co-locations of QTL for Zn, Fe and Mn were observed on chromosome 5. The QTLs for Cd, Cu and Zn were co-localized on chromosome 10, and QTLs for Zn, As and Mn was on chromosome 12. The Zn concentration in F2 generation showed significant correlation with concentrations of As (r = -0.4), Cu (r = 0.5) and Fe (r = 0.2) (P < 0.01). Also, the Ca concentration was significantly related with Mn and Fe concentrations (P < 0.01). Fine mapping of these QTLs is underway to analyze their functional relationship.

• 한국전기전자재료학회논문지
• /
• 제19권3호
• /
• pp.280-286
• /
• 2006

As a way to expand electric capacity in conductor with electric power demand, STACIR/AW (Super Thermal-resistant Aluminum-alloy Conductors Aluminum-clad Invar-Reinforced) conductor which has high electric current and heat resistance characteristics have been developed. STACIR/AW power line is mechanical composite wire composed of steel cores for dip control and aluminum conductors for sending electric current. Recently, to ensure stable operation and prediction of wire life span of STACIR/AW conductor, a heat property of STACIR/AW conductor have been investigated. In the present work, a change of essential property with long term-heat exposure of STACIR/AW conductor and its structure material, INVAR wire and Al conductor, have been investigated. INVAR/AW is approximately $3.2\;{\mu}m/m^{\circ}C$. thermal expansion coefficient of INVAR/AW wire increases with time of heat exposure. the thermal expansion coefficient of INVAR/AW is markedly influenced by heat and mechanical treatment. creep rate(0.242) of STACIR/AW $410\;mm^2$ conductor at room temperature is much higher than that(0.022) at $210\;^{\circ}C$ STACIR/AW $410\;mm^2$ conductor has minimum creep rate at operating temperature. To lower creep rate with increase temperature is more unique characteristics in STACIR/AW. It is expected that STACIR/AW turned its tension to INVAR/AW at the transition temperature. at room temperature, the tension apportionment of INVAR/AW in STACIR/AW is about $50\;\%$. but whole tension of STACIR/AW is placed on the INVAR/AW alone of core metal above transition temperature.

• Journal of Electrochemical Science and Technology
• /
• 제7권2호
• /
• pp.132-138
• /
• 2016

In this study, we report the fabrication of functional complex fibers, which have been studied widely globally for numerous applications. Here, we fabricated conductive complex fibers with antibacterial properties by coating metal ions on the surface of plastic (polypropylene) fibers using the electroless and electrochemical deposition. First, we polished the polypropylene melt-blown fiber surface and obtained an absorbing Pd seed layer on its surface. Subsequently, we substituted the Pd with Cu. Bis-3-sulfopropyl-disulfide disodium salt (SPS), polyethylene glycol (PEG), and ethylene thiourea (ETU) were used as the brightener, carrier, and leveler, respectively for the electroplating. We focused on most achieving the stable plating condition to remove dendrites, which are normally during electroplating metals so that smooth layer is formed on the fiber surface. The higher the amount of SPS, the higher was the extent of irregular plate-like growth. Many irregularities in the form of round spheres were observed with increase in the amount of PEG and ETU. Hence, when the additives were used separately, a uniform coating could not be obtained. A stable coating was obtained when the three additives were combined and a uniform 5-9 μm thick copper layer with a stable morphology could be obtained around the fiber. We believe that our results can be applied widely to obtain conductive fibers with antibacterial properties and are useful in aiding research on conductive lightweight composite fibers for application in information technology and robotics.

• 자원환경지질
• /
• 제41권1호
• /
• pp.57-62
• /
• 2008

휴폐광지역의 산성광산배수를 처리하기 위한 자연정화처리시설로서 소택지의 설치가 증가하고 있다. 이러한 소택지의 기질물질로서는 흔히 석회석, 참나무조각, 버섯퇴비 등이 벌크형태로 적용된다. 이러한 소택지의 정화효율은 시간이 지남에 따라 점차 저하되며, 특히 산성배수와의 화학반응에 의한 기질물질 층의 투수계수 감소에 주로 기인한 것으로 파악된다. 본 연구의 목적은 산성광산배수 처리시설에서 황산염환원균(SRB) 고정화 담체의 적용성을 평가하기 위한 것이다. 고정화담체는 유기물질인 버섯퇴비와 참나무 퇴비, pH 완충제인 석회석가루 등을 토양미생물을 접종한 m-CSB와 혼합하여 제작하였다. 본 실험에서 고정화담체는 벌크형태에 비하여 pH, 황산염제거율 및 중금속 제거율에서 효율이 우수함을 확인할 수 있었다.

• 비파괴검사학회지
• /
• 제21권4호
• /
• pp.425-433
• /
• 2001

복합재료-금속 접착접합부가 사용 중 반복 하중을 받을 때 발생하는 피로 손상도를 음향초음파(acousto-ultrasonics; AU)법과 음향방출(acoustic emission; AE)법을 이용하여 평가하였다. 피로시험에는 단일겹치기(single-lap) 시험편을 사용하였으며, AU법을 통해 취득한 신호로부터 음향초음파변수(acousto-ultrasonic parameters; AUP)와 피로손상과의 상관관계 곡선을 얻고, AE법에서는 누적 AE events를 통한 피로손상과의 상관관계 곡선을 얻어, AU법과 AE법의 결과를 비교하였다. 이 곡선들은 피로손상에 의한 고분자기지 복합재료의 강성 저하$(E/E_0)$를 나타내는 곡선과 매우 유사하며, 이를 바탕으로 피로 손상도의 예측과 잔여 수명의 예측이 가능하다. 또한 피로 하중의 초기 단계와 피로손상의 누적에 의해 급격한 변화가 나타나는 단계의 파형 주파수 성분을 비교하여, 피로 파괴의 마지막 단계에서 나타나는 신호 중에는 본격적인 피로손상에 의해 발생하는 AE 신호 성분이 포함되어 있음을 확인할 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.220-220
• /
• 2011

The Ne-Xe plasmas in dense plasma-focus device with coaxial electrodes were generated for extreme ultraviolet (EUV) lithography. The influence of gas mixture ratio, Ne-Xe (1, 10, 15, 20, 25, 30, 50%) mixture gas, on EUV emission measurement, EUV intensity and electron temperature in the coaxially focused plasma were investigated. An input voltage of 4.5 kV was applied to the capacitor bank of 1.53mF and the diode chamber was filled with Ne-Xe mixture gas at a prescribed pressure. The inner surface of the cylindrical cathode was lined by an acetal insulator. The anode was made of tin metal. The EUV emission signal of the wavelength in the range of 6~16 nm has been detected by a photo-detector (AXUV-100 Zr/C, IRD). The visible emission line was also detected by the composite-grating spectrometer of the working wavelength range of 200~1100 nm (HR 4000CG). The electron temperature is obtained by the optical emission spectroscopy (OES) and measured by the Boltzmann plot with the assumption of local thermodynamic equilibrium (LTE).

• 한국항공우주학회지
• /
• 제34권3호
• /
• pp.22-30
• /
• 2006

본 논문은 초소형 비행체 날개 주위의 공기흐름 조절을 위한 IPMC 작동기로 구동되는 ZNMF 펌프의 체계적인 설계 및 해석 기법을 소개한다. IPMC는 낮은 인가전압에서 큰 굽힘 변위를 발생시키며, 공기 중에서도 작동이 가능하고, 작은 크기로 손쉽게 제작할 수 있기 때문에 소형 펌프의 작동 막으로 매우 적합한 재료이다. 본 연구에서는 수치해석 기법을 이용하여 최대 작동 체적을 발생시키는 IPMC 작동 막의 최적 형상을 찾고, 이러한 최적형상에 기초하여 슬롯을 갖는 ZNMF 펌프를 설계하였다. 이후 초소형 비행체의 비행속도, 펌프 작동 막의 구동 주파수(~ 40 Hz), 슬롯을 통과하는 공기의 속도 등을 이용하여 무차원화 된 진동수와 모멘텀 계수를 구하였고, 설계된 ZNMF 펌프가 초소형 비행체 날개의 공기흐름 조절에 적용이 가능함을 보였다.

• 한국분말재료학회지
• /
• 제25권2호
• /
• pp.158-164
• /
• 2018

Multi-walled carbon nanotube (MWCNT)-copper (Cu) composites are successfully fabricated by a combination of a binder-free wet mixing and spark plasma sintering (SPS) process. The SPS is performed under various conditions to investigate optimized processing conditions for minimizing the structural defects of CNTs and densifying the MWCNT-Cu composites. The electrical conductivities of MWCNT-Cu composites are slightly increased for compositions containing up to 1 vol.% CNT and remain above the value for sintered Cu up to 2 vol.% CNT. Uniformly dispersed CNTs in the Cu matrix with clean interfaces between the treated MWCNT and Cu leading to effective electrical transfer from the treated MWCNT to the Cu is believed to be the origin of the improved electrical conductivity of the treated MWCNT-Cu composites. The results indicate the possibility of exploiting CNTs as a contributing reinforcement phase for improving the electrical conductivity and mechanical properties in the Cu matrix composites.

• 한국분말재료학회지
• /
• 제24권4호
• /
• pp.292-297
• /
• 2017

A metallic oxide layer of a heat-resistant element contributes to the high-temperature oxidation resistance by delaying the oxidation and has a positive effect on the increase in electrical resistivity. In this study, green compacts of Fecralloy powder mixed with amorphous and crystalline silica are oxidized at $950^{\circ}C$ for up to 210 h in order to evaluate the effect of metal oxide on the oxidation and electrical resistivity. The weight change ratio increases as per a parabolic law, and the increase is larger than that observed for Fecralloy owing to the formation of Fe-Si, Fe-Cr composite oxide, and $Al_2O_3$ upon the addition of Si oxide. Si oxides promote the formation of $Al_2O_3$ and Cr oxide at the grain boundary, and obstruct neck formation and the growth of Fecralloy particles to ensure stable electrical resistivity.

• 공업화학
• /
• 제27권6호
• /
• pp.659-663
• /
• 2016

알켄 또는 알킨의 산화 반응이 루테늄 지르코니아 불균일 촉매에 의해 매우 선택적이며 효율적으로 전환되었다. 절단반응을 통해, C-C 이중 결합은 알데히드 관능기로, 삼중 결합은 다이케톤 또는 카르복시산으로 전환되었는데, 다양한 기질들이 $30^{\circ}C$에서 $PhI(OAc)_2$ 산화제와 dichloromethane 및 물(각각 5 mL와 0.5 mL)의 혼합 용매 조건에서 반응이 수행되었다. 사용된 촉매 $Ru(OH)_x/ZrO_2$는 이 절단 반응에 대해 기존의 다른 루테늄 기반 불균일 또는 균일 촉매들보다 더 좋은 활성과 선택성을 보였다. 반응이 진행되는 동안, 제조된 촉매의 기계적인 물성은 안정적이었고, 금속의 침출은 전혀 보이지 않았다. 불포화된 탄화수소들의 산화적 절단에 대해, 합성된 촉매는 여러 번 재사용해도 그 촉매의 성능을 그대로 유지하였다.