• 환경위생공학
• /
• 제14권3호
• /
• pp.63-70
• /
• 1999

A study on the zeolite synthesized of bituminous coal fly ash from power plant has been carried out to reuse industrial waste. The synthesized zeolite was proved to be 4A type by means of the X-ray diffraction analysis and the degree of crystallinity was found to be higher than 90%. Then the synthesized zeolite was used as an adsorbent to remove the heavy metal ions in the CU, Pb, and Cd containing wastewater and water. Also, adsorption characteristics and kinetics of synthesized zeolite in the each metal ion solutions were studied. In each ion solutions, the adsorbed amounts of Pb, Cd, and Cu to the unit weight of synthesized zeolite were 141.6, 118.8, and 131.4mg/g respectively when each metal ion concentration was 500mg/L solution. The adsorption kinetics was fitted well to the Freundlich isotherms. The value of l/n for Pb, Cd, and Cu and 0.27, 0.50, and 0.66, respectively. Those results showed that the synthesized zeolite could be used as an adsorbent to remove single heavy metal ions in the wastewater and water. The heats of adsorption, H values of Pb, Cd, and Cu were 4.87, 14.95, and 18.23kacl/mol by the Henry-van't Hoff equation.

• 한국의류산업학회지
• /
• 제8권5호
• /
• pp.577-584
• /
• 2006

The binding of heavy metal ions onto cross-linked chitosan in dilute aqueous solution has been investigated as a function of pH (4.0 and 7.0), agitation period (10-180min) and concentration of various metal cations (5, 10, 50 and 100ppm). In order to obtain adsorbents that are insoluble and stable, and prevent the dissolution loss of chitosan into an acidic aqueous solution, chitosan flakes were cross-linked with epichlorohydrine (ECH) and its adsorption behavior was compared with that of the non cross-linked chitosan. An advantage of ECH is that it does not eliminate the cationic amine functional group of chitosan. In terms of adsorption ratio, the chitosan cross-linked at an ECH was inferior to original chitosan and was found that chitosan has a selectivity much remarkable than the cross-linked chitosan in low concentrated metal solutions. However, no significant decreases in the adsorption ratios were observed between the cross-linked ECH-chitosan and the non cross-linked chitosan concerning the adsorption of $Ni^{2+}$, $Co^{2+}$, $Pb^{2+}$ and $Zn^{2+}$ acidic solution.

• 공업화학
• /
• 제3권1호
• /
• pp.156-171
• /
• 1992

Chitin was isolated from crab shell. Chitosan, which was prepared by the deacetylation of chitin, was acylated to obtain N-acetyl(regenerated chitin), N-propionyl, N-butyryl, N-hexanoyl, N-decanoyl and N-maleated chitosans and their metal ion adsorption characteristics of N-acylchitosans were investigated. In order to enhance the adsorptivity, their porous beads were prepared and their adsorptivity with respect to the porosity and the adsorptivities for metal ions($Cu^{2+}$, $Ni^{2+}$, $CO^{2+}$, $Mn^{2+}$, $Ag^{+}$)were investigated. Their metal ion adsorptivities were remarkably imporved compared to those of chitin. As the larger acyl groups were introduced, adsorptivity increased, but that of N-decanoyl chitosan showed some decrease because of steric hindrance of the bulky N-decanoyl group. N-Maleated chitosan containing carboxyl group showed highly improved adsorptivity, and N-acylchitosans showed the good selective adsorption in the mixed metal ions($Cu^{2+}$, $Ni^{2+}$, $CO^{2+}$, $Mn^{2+}$ and $Ag^{+}$). They also showed excellent adsorption characteristics as chelating polymers.

• 한국물환경학회지
• /
• 제21권6호
• /
• pp.569-574
• /
• 2005

In this study, alginic acid that had an high affinity for a heavy metal and was noted for biological adsorbent was modified by an oxidizer, $KMnO_4$. Chemical modification changed hydroxyl of the alginic acid into carboxyl and compare with alginic acid, modified alginic acid exhibited a characteristics that carboxyl groups are comparatively high. For the use of them as an adsorbent, beads were prepared by dropping alginic acid and modified alginic acid solution in dilute 2 wt% $CaCl_2$ solution for non water soluble. The amount of removed $Cu^{2+}$ and $Pb^{2+}$ by modified alginic acid beads showed 84.7 mg and 90.9 mg per gram of beads, respectively. And it showed the amount of adsorbed heavy metal ions 10~20% higher than that of alginic acid beads in range of pH 4~7. In particular, modified alginic acid have a good adsorption capacity for $Cu^{2+}$ and $Pb^{2+}$ by Freundlich adsorption isotherm. According to this study, it is verified that alginic acid that is a nature high molecular substance improved capacity for actual application by increased heavy metal adsorption capacity by chemical modification.

• 센서학회지
• /
• 제32권3호
• /
• pp.147-153
• /
• 2023

Metal-organic frameworks (MOFs) of cobalt gallate were synthesized and deposited on gold electrodes using self-assembly monolayers (SAMs) and hydrothermal processing. These MOF films exhibit strong adsorption capabilities for gaseous particulates, and the use of SAMs allows the synthesis and deposition processes to be completed in a single step. When cobalt gallate is mixed with SAMs, a coordination bond is formed between the cobalt ion and the carboxylate or hydroxyl groups of the SAMs, particularly under hydrothermal conditions. Additionally, the quartz crystal microbalance (QCM) gas sensor accurately measures the number of particulates adsorbed on the MOF films in real-time. Thus, the QCM gas sensor is a valuable tool for quantitatively measuring gases, such as SO₂, NO₂, and CO₂. Furthermore, the QCM MOF film gas sensor was more effective for gas adsorption than the MOF particles alone and allowed the accurate modeling of gas adsorption. Moreover, the QCM MOF films accurately detect the adsorption-desorption mechanisms of SO₂ and NO₂, which exist as gaseous particulate matter, at specific gas concentrations.

• 대한환경공학회지
• /
• 제35권1호
• /
• pp.31-37
• /
• 2013

기존 흡착제들보다 우수한 흡착성능을 확보하고, 특히 특정한 용제에 대한 흡착성능을 극대화하기 위하여 $1,100m^2/g$의 비표면적을 갖는 활성탄소섬유를 기본흡착제로 적용하였고, 여기에 활성금속을 첨착시켜 흡착성능과 선택성을 제고하고자 하였다. 활성금속은 screening 연구를 수행하여 최종적으로 Cu, Cr을 선정하였으며, 활성금속첨착 활성탄소섬유의 제조변수는 제조온도, 제조시간, 활성금속의 종류이었다. 물성측정 및 흡착반응실험을 통하여 금속을 $100^{\circ}C$에서 5시간 동안 첨착하였을 경우 acetone gas 흡착성능이 가장 높게 나타났으며, 기존 활성탄소섬유보다 2배 이상의 높은 흡착성능을 확인하였다. 한편, 활성금속첨착 활성탄소섬유의 확산 및 흡착에 필요한 최소 접촉시간은 최소한 0.5초 이상은 유지해야 함을 확인할 수 있었다.

• 한국응용과학기술학회지
• /
• 제37권5호
• /
• pp.1222-1228
• /
• 2020

Tin bis(monohydrogen orthophosphate) monohydrate 물질의 흡착 성질에 관하여 KCl 수용액을 통하여 조사하였다. 금속이온 농도와 pH를 변화시키면서 어떻게 달라지는지 화학평형에 바탕을 두고 data를 분석하였다. 금속이온들의 흡착 data는 Langmuir 흡착식에 넣어 Langmuir 수치들을 얻는 데 사용되었다. Tin phosphate는 산성에서 이온교환 화합물로 작용하였으며, 2가의 전이금속이온에 대해 Cu⁺² > Co⁺² > Ni⁺²의 순서로 선택적 흡착성질을 나타내었다. 약한 산성 이온 교환체에서와 같이 금속이온의 교환은 tin phosphate의 선택성을 결정하는데 결정적 역할을 하였다. 모든 경우에서 흡착의 정도는 온도와 농도의 증가와 함께 증가하였다. Lnngmuir 수치들은 흡착과정 동안의 엔트로피, 엔탈피, 자유에너지 변화량같은 열역학적 함수들을 계산하는데 이용되었다.

• Korean Chemical Engineering Research
• /
• 제57권4호
• /
• pp.484-491
• /
• 2019

산업적으로 중요한 가치를 지니는 폴리프로필렌 합성의 원료인 프로필렌을 고순도로 얻기 위해서는 효율적인 프로필렌/프로판 분리 기술이 필요하다. 기존 증류 공정은 프로필렌과 프로판의 유사한 물리화학적 성질로 인해 매우 높은 에너지가 소모되기때문에, 흡착분리 기술이큰관심을받고있다. 본연구에서는 Grand Canonical Monte Carlo (GCMC) 분자 모사를 활용하여 기공의 형태가 다른 두 종류의 유무기복합다공체(Metal-Organic Frameworks)의 빈금속배위자리(open metal sites) 흡착 강도를 임의로 조절하며 프로필렌/프로판 흡착 분리 성능의 변화를 조사하였다. 흡착 분리 성능은 작업 용량, 선택도, Adsorption Figure of Merit (AFM) 등으로 평가하였고, 이를 통해 흡착제가 최적의 프로필렌/프로판 분리 성능을 가지기 위해 필요한 흡착 사이트의 밀도 및 강도 그리고 온도 조건 등을 제시하였다.

• 분석과학
• /
• 제17권1호
• /
• pp.82-84
• /
• 2004

The quantitative trace analysis of ions could be deteriorated by filter papers because of the effect of adsorption. Generally the adsorption of anions on filter paper did not occurred. Instead, $Cl^-$ and $NO{_3}^-$ ions were extracted from the filter papers. However, most metal ions were adsorbed on the filter papers by the formation of hydroxide in neutral solution. The adsorption of metal ions except $Ag^+$ ion could be avoided depend on the acid concentrations.

• Journal of Industrial and Engineering Chemistry
• /
• 제67권
• /
• pp.316-325
• /
• 2018

Aluminum based metal-organic framework using a di-carboxylate linker succinic acid (Al-SA MOF), are synthesized in water with minimal generation of secondary pollutants. The physicochemical properties of Al-SA MOF were examined, followed by its utility for the adsorption of Acid Black 1 (AB1) in aqueous media. Influences of key parameters such as pH, contact time, initial AB1 concentration,temperature, and selectivity on the adsorption process were assessed. A series of adsorption mechanisms are proposed, which involve electrostatic, hydrogen bonding, and hydrophobic interactions. These findings suggest that Al-SA MOF is a potent candidate in removing complex azo dyes molecules from aqueous media.