• 한국대기환경학회지
• /
• 제4권2호
• /
• pp.20-27
• /
• 1988

A simple two stage aerosol filter sampler which allows simultaneous and fractional collection of two different-size particles, coarse and fine, was constructed and applied to the collection of Seoul atmospheric particulate for inorganic analysis. The sampler consist of two 47-mm diameter filter holder, a pneumatic pump, and a flowmeter. Filtering rate normally runs around 20$\ell$/min for 8 hrs. Using the sampler, a series of seasonal aerosol samples were collected from June 1986 to March 1988 at Yonsei University campus, Seoul and subsequently analysed for ten environmentally important metals using an atomic absorption spectrometer and an inductively coupled plasma emission spectrometer. The analysed metals are Al, Cd, Cr, Cu, Fe, Mn, Ni, Pb, V, and Zn. The analytical results showed the following order of metal abundance; Al > Fe > Zn > Pb > Mn > Cu > V > Ni > Cr > Cd. Based upon their size distribution pattern, the analyzed matals could be clasified into two groups, those present primarily in coarse particle and those in fine particle. Fe, Al, Mn, V, and Cr belong to the former group while the rest to the latter. Most metal concentration were highest in spring or winter, and lowest in autumn. Statistical analysis showed strong correlations between Al and Fe, Pb and Zn, and Cu and Mn.

• 한국재료학회지
• /
• 제32권3호
• /
• pp.168-179
• /
• 2022

Microbiologically Influenced Corrosion (MIC) occurring in underground buried pipes of API 5L X65 steel was investigated. MIC is a corrosion phenomenon caused by microorganisms in soil; it affects steel materials in wet atmosphere. The microstructure and mechanical properties resulting from MIC were analyzed by OM, SEM/EDS, and mapping. Corrosion of pipe cross section was composed of ① surface film, ② iron oxide, and ③ surface/internal microbial corrosive by-product similar to surface corrosion pattern. The surface film is an area where concentrations of C/O components are on average 65 %/16 %; the main components of Fe Oxide were measured and found to be 48Fe-42O. The MIC area is divided into surface and inner areas, where high concentrations of N of 6 %/5 % are detected, respectively, in addition to the C/O component. The high concentration of C/O components observed on pipe surfaces and cross sections is considered to be MIC due to the various bacteria present. It is assumed that this is related to the heat-shrinkable sheet, which is a corrosion-resistant coating layer that becomes the MIC by-product component. The MIC generated on the pipe surface and cross section is inferred to have a high concentration of N components. High concentrations of N components occur frequently on surface and inner regions; these regions were investigated and Na/Mg/Ca basic substances were found to have accumulated as well. Therefore, it is presumed that the corrosion of buried pipes is due to the MIC of the NRB (nitrate reducing bacteria) reaction in the soil.

• 구강회복응용과학지
• /
• 제22권4호
• /
• pp.329-340
• /
• 2006

Statement of problem: Damping of the peak force transmitted to implants has been reported by in vitro studies using impact forces on resin-veneered superstructures. Theoretical assumptions suggest that use of acrylic resin for the occlusal surfaces of a prosthesis would protect the connection between implant and bone. Therefore, the relationship between prosthesis materials and the force transmitted through the implant system also needs to be investigated under conditions that resemble the intraoral mechanical environment. Purpose: The purpose of this study was to analyze the fracture strength and modes of temporary prosthesis when a flange or occlusally extended structure were connected on the top of the abutment. Material and method: Modified abutments of winged and bulk design were made by casting the desired wax pattern which is made on the UCLA type plastic cylinder. Temporary crowns were made using templates on the modified abutments, and its fracture toughness and strain were compared to the traditional temporary prosthesis. To evaluate the effect of aging, 5.000 times of thermocycling were performed, and their result was compared to the 24hours specimen result. Results: The following conclusions were drawn from this study: 1. In the fracture toughness test, temporary crown's fracture line located next to the screw hole while modified designs with metal support showed fracture line on the metal and its propagation along the metal-resin interface. 2. Wing and bulk structure didn't show significant difference in the fracture toughness (p>0.05), but wing structure showed stress concentration on the screw hole area compared to bulk structure which showed even stress distribution. 3. In the fracture toughness test after thermocycling, wing and bulk structure showed increased or similar results in metal supported area while off-metal area and temporary crown showed decreased results. 4. In the strain measurement after thermocycling, its value increased in the temporary and bulk structure. However, wing structure showed decreased value in the loading point while increased value in the screw hole area. Conclusion: Wing type design showed compatible result to the bulk type that its application with composite resin prosthesis to the implant dentistry is considered promising.

• 대한환경공학회지
• /
• 제39권5호
• /
• pp.265-276
• /
• 2017

폐광산은 방치된 광미 등으로 인하여 주변환경에 복합적인 중금속 오염을 야기한다. 이를 방지하기 위하여 국내에서는 1990년대 중반부터 석회석 등의 안정화제와 복토를 이용한 안정화 공법을 기반으로 토양개량사업이 시행 중이다. 복원된 토양의 상부에서는 작물의 재배로 인해 중금속이 고정된 안정화 층이 지화학적 변화를 겪게 되며 이에 따른 중금속의 용출 및 이동이 가능하므로 토양개량사업을 마친 토양에 대한 질 평가 등의 사후 관리는 반드시 필요하다. 토양의 질 평가를 하기 위해서는 이화학적 분석 또는 생물학적인 분석을 개별적으로 하기보다는 이들을 결합한 종합적인 분석이 필요하며 이를 통해 토양의 생태기능상태(ecological functional state)를 평가할 수 있다. 본 연구에서는 대상시료로 경상북도 봉화군 풍정 광산, 전라남도 광양시 점동 광산, 충청남도 서산시 서성 광산 인근 안정화 처리 토양과 안정화 처리가 되지 않은 오염, 비오염 토양을 선정하였다. 토양의 이화학적 성질인 pH, CEC, LOI와 중금속 농도를 측정하였고, 미생물 효소활성도와 비소환원유전자를 정량하였다. 다변량 통계분석을 바탕으로 모든 데이터를 분석하여 토양 생태기능상태를 평가하였다. 안정화 심도 토양과 상부복토, 하부오염토 간의 상관관계를 확인한 결과, 안정화 심도 토양에서 중금속의 농도가 높게 측정되었다. 그리고 풍정광산에서는 안정화 처리 심도 토양이 하부오염토와 유사한 특성을, 점동, 서성 광산에서는 안정화 심도 토양이 상부복토와 유사한 특성을 나타내었는데 이는 점동, 서성 광산 주변 상부복토의 생태기능상태가 좋지 않을 수 있음을 시사한다.

• 한국진공학회지
• /
• 제20권4호
• /
• pp.300-306
• /
• 2011

본 연구는 편극 패턴된 강유전체 단결정 $LiNbO_3$ (0001) 기판에 광화학적 환원반응을 이용하여 금속(Au, Ag) 나노입자를 증착시키고, 금속 입자의 종류와 표면의 극성에 따른 나노입자의 표면 분포를 원자간력현미경(AFM)으로 조사하였다. 전극 인가에 의해 주기적으로 편극 패턴된 강유전체 단결정 $LiNbO_3$ (periodically polarity-patterned $LiNbO_3$: PPLN)을 기판으로 사용하였으며, PPLN의 각 영역의 편극 방향은 Piezoresponse force microscopy로 확인하였다. 금속(Ag, Au) 나노 입자는 금속이 포함된 수용액에 PPLN 기판을 넣고, 자외선 램프로 30초에서 3분간 노출시켜 광환원 반응으로 기판에 증착시켰다. 시료 성장후, 공기 중에서 AFM을 이용하여 나노입자의 형태, 크기, 및 표면분포를 조사하였다. Ag 입자의 경우, -Z 편극 영역보다 +Z 편극 영역에 크고 밀도가 높은 나노 입자가 증착되었으며, 특히 편극 경계 부분에 가장 큰 Ag 나노입자가 증착되어, 나노선 모양으로 성장됨이 확인되었다. 그러나 Au 입자의 경우는 편극 경계부분에 입자가 증착되는 경향이 없었다. 두 입자 모두 자외선 노출시간이 증가함에 따라, 증착된 나노입자의 크기는 증가하는 경향을 보였다. 이와 같이 증착된 금속 나노입자가 강유전체의 표면편극에 따라 다른 분포로 성장되는 것을 강유전체 표면 극성에 따른 표면 밴드구조 변화, 광전 효과 및 표면의 전기장의 불균일성에 의한 수용액 속의 금속 양이온과 자외선에 의해 생성된 전자와의 광화학적 반응에 대한 모델로 논의할 것이다.

• 한국식물학회:학술대회논문집
• /
• 한국식물학회 2002년도 춘계학술발표대회:발표눈문요지록
• /
• pp.62-72
• /
• 2002

This study has investigated the biosynthesis and function of the heavy metal binding peptides, the phytochelatins, in plants. PCs are synthesised enzymatically from glutathione by the enzyme PC synthase in the presence of heavy metal ions. Using Arabidopsis thaliana as a model organism cadmium-sensitive, phytochelatin-deficient mutants have been isolated and characterised in previous studies. The cadl mutants have wildtype levels of glutathione, are PC deficient and lack PC synthase activity. Thus, the CADl gene has been proposed to encode PC synthase. The CADl gene was isolated by a positional cloning strategy The gene was mapped and a candidate identified. Each of four cadl mutants had a single base pair change in the candidate gene and the cadmium-sensitive, cadl phenotype was complemented by the candidate gene. This demonstrated the CADl gene had been cloned. A homologous gene in the fission yeast, Schizosaccharomyces pombe was identified through database searches. A targeted-deletion mutation of this gene was constructed and the mutant, like cadl mutants of Arabidopsis, was cadmium-sensitive and PC-deficient. A comparison of the redicted amino acid sequences reveals a highly conserved N-terminal region Presumed to be the catalytic domain and a variable C-terminal region containing multiple Cys residues proposed to be involved in activation of the enzyme by metal ions. Similar genes were also identified in animal species. The Arabidopsis CADl/AtPCSl and S. pombe SpbPCS genes were expressed in E. coli and were shown to be sufficient for glutathione-dependent, heavy metal activate PC synthesis in vitro, thus demonstrating these genes encode PC synthase enzymes. Using RT-PCR, AtPCSl expression appeared to be independent of Cd exposure. However, at higher levels of Cd exposure a AtPCSl-CUS reporter gene construct appeared to be more highly expressed. Using the reporter gene construct, AtPCSl was expressed most tissues. Expression appeared to be greater in younger tissues and same higher levels of expression was observed in some regions, including carpels and the base of siliques. AtPCS2 was a functional gene encoding an active PC synthase. However, its Pattern of expression and the phenotype of a mutant (or antisense line) have not been determined. Assuming the gene is functional then it has clearly been maintained through evolution and must provide some selective advantage. This implies that, at least in some cells or tissue, it is likely to be the dominant PC synthase expressed. This remains to be determined

• 대한기계학회논문집A
• /
• 제37권8호
• /
• pp.1051-1057
• /
• 2013

본 연구에서는 광학적 방법으로 곡면변형률을 측정하고자 할 때, 소재 표면이 임의의 곡면이거나 요철이 많은 경우, 부식이나 오염으로 표면이 불량한 경우, 그리고 고무나 폼, 생체 조직 등과 같이 규칙적인 격자망을 인쇄하기 어려운 경우에도 적용할 수 있는 자동 곡면변형률 측정시스템 'ASIAS-bio'를 개발하였다. 이 시스템은 시편의 재질과 표면상태, 격자 패턴과 크기, 격자 마킹 방법, 변형 정도 등 측정 조건에 관계없이 사용이 가능한 것이 특징이다. 우선 그 신뢰성을 평가하기 위하여 금속판재 성형제품의 변형률 분포를 상용 장비로 측정한 결과와 비교하였다. 또한, 돼지 어깨 관절막, 인체 무릎 피부 등 연질 생체 조직의 변형 측정에 적용함으로써 본 시스템의 유용성을 확인하였다.

• 동아시아식생활학회지
• /
• 제16권6호
• /
• pp.724-730
• /
• 2006

Two types of powdered chungkookjang, were prepared by a hot air-drying process, and the freeze-drying, and composition and aroma patterns were examined. The fresh chungkookjang was composed of 53.8% moisture, while the hot air-dried and freeze-dried powdered chungkookjang contained 5.2% moisture, $39.3{\sim}39.4%$ crude protein, $18.6{\sim}18.7%$ crude lipid, $4.7{\sim}5.0%$ crude ash, and $31.7{\sim}32.2%$ carbohydrate. The pH of the each powered chungkookjang was similar, ranging from 6.5 to 6.7. The freeze-dried powdered chungkookjang showed the highest lightness (67.30), yellowness (59.37) while the highest redness (43.1) was observed in the hot air-dried chungkookjang. Each chungkookjang was analysed by an electronic nose with metal oxide 12 sensors and SPME-GC/MS. The response by the electronic nose was analysed by principal component analysis (PCA). The proportion of the first principal component was 90.47%, suggesting that each aroma pattern of the prepared chungkookjang was discriminated. SPME-GC/MS was used to identify the pyrazines. The percentage of pyrazines observed in the fresh chungkookjang, freeze-dried powdered chungkookjang, and hot air-dried powdered chungkookjang was 6.6, 3.8 and 15.9%, respectively. A higher overall preference was obtained from the hot air-dried powdered chungkookjang than with the freeze-dried powdered chungkookjang.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.277-278
• /
• 2009

We have studied an angular dependence of emission pattern of top-emssion organic light-emitting diodes (TEOLED). Device structure is Al(100nm)/TPD(40nm)/$Alq_3$(60nm)/LiF(0.5nm)/Al(2nm)/Ag(30nm). N,N'-diphenyl-N,N'-di(m-tolyl)-benzidine (TPD) and tris-(8-hydroxyquinoline) aluminium ($Alq_3$)were used as a hole transport layer and emission layer, respectively. Organic layers and cathode were thermally evaporated at $2\times10^{-5}$torr. The evaporation rate of the organic material was maintained to be $1.5\sim2.0{\AA}/s$, and that of metal layer to be $0.5\sim5{\AA}/s$. A transmittance of a cathode electrode(Al/Ag) in visible region is about 25~30%. In order to measure view-angle dependent intensity, electroluminenscence spectra of the device at each angle were integrated. Angle dependent emission spectra of the device do not show blue shift. Emission intensity of the device that the going straight characteristic is stronger the bottom-emission organic light-emitting diodes is shown.

• 복식문화연구
• /
• 제18권5호
• /
• pp.1003-1016
• /
• 2010

The purpose of this study is to reorganize any rusty image including natural modeling characteristic presented from the natural phenomenon to certain patterns in order to create the fashion design that are valued in the expansion of independently expressional area and modeling art. As a method for research, the author analyzed the concept and characteristic for rust with a base of theoretical background by the documental research and realistic consideration, analyzed its modeling characteristic through domestic and overseas pictures, and e-documents as data, inspected the modeling activities of various categories that various images were adapted related to rust, looked into the concept of Digital Textile Printing and its producing procedure as an expressional method, and analyzed the examples of modern dress and its ornament making use of Digital Textile Printing. The conclusions of this study are as below. First, the rust occurred due to the natural phenomenon is the bond with different material like metal, each unique modeling characteristic occurs and harmony of various patterns has abundant aesthetic value. Second, the author could endowed sensible characteristic and speciality with works and could produce creative fashion design that painting, abstractive pattern and harmony of unique sense of colors are significant by using the image of rust, Third, to emphasize natural feeling of rust, the author could develop creative design that simple silhouette and impressive pattern look significant by reorganizing and applying rust according to repetition, increment, rhythm, contract, emphasis and harmony. Fourth, Digital Textile Printing method is used to induce visual effect by the expression of feels of rust, and the author could express the natural patterns, delicate expression for the feels of a material and unique design of emotion.