• Bulletin of the Korean Chemical Society
• /
• 제33권6호
• /
• pp.1845-1850
• /
• 2012

Layered metal hydroxides (LMHs) containing calcium were synthesized by coprecipitation in solution having two different trivalent metal ions, iron and aluminum. Two mixed metal solutions ($Ca^{2+}/Al^{3+}$ and $Ca^{2+}/Fe^{3+}$ = 2/1) were added to sodium hydroxide solution and the final pH was adjusted to ~11.5 and ~13 for CaAl-and CaFe-LMHs. Powder X-ray diffraction (XRD) for the two LMH samples showed well developed ($00l$) diffractions indicating 2-dimensional crystal structure of the synthesized LMHs. Rietveld refinement of the X-ray diffraction pattern, the local structure analysis through X-ray absorption spectroscopy, and thermal analysis also confirmed that the synthesized precipitates show typical structure of LMHs. The chemical formulae, $Ca_{2.04}Al_1(OH)_6(NO_3){\cdot}5.25H_2O$ and $Ca_{2.01}Fe_1(OH)_6(NO_3){\cdot}4.75H_2O$ were determined by inductively coupled plasma-atomic emission spectroscopy (ICP-AES). Particle morphology and thermal behavior for the synthesized LMHs were examined by field emission scanning electron microscopy and thermogravimetricdifferential scanning calorimetry.

• 대한치과보철학회지
• /
• 제58권3호
• /
• pp.251-256
• /
• 2020

최근 치과 분야에서 디지털 기술의 발전으로 DMLS (Direct Metal Laser Sintering) 기술을 사용하여 의치의 금속구조물 제작이 가능하다. 이 방법에서 인상은 구강 스캔이나 모델 스캔으로 대체 할 수 있으며, 기존 주조 소환 방법에서 왁스 패턴은 CAD 소프트웨어에서 설계되고, 설계된 STL (standard template library) 파일을 DMLS 기법을 통해 국소의치의 최종 구성 요소를 제작할 수 있다. 치과 분야에서 디지털 기술 이용의 장점은 적합도와 정확성에 있다. 본 증례에서 지지 및 간접 유지 역할을 하는 교합면 레스트의 파절이 발생한 환자에서 DMLS 기술과 레이저 용접 기술을 사용하여 국소의치를 수리하였으며, 기능적, 심미적으로 만족스러운 결과를 보였다.

• 한국항공우주학회지
• /
• 제50권4호
• /
• pp.223-231
• /
• 2022

금속 적층제조 공정 중 발생할 수 있는 잔류응력은 3D 프린팅을 통한 정밀한 금속 부품 제작을 위해 적절히 통제되어야 하는 중요한 요소이다. 따라서 본 연구에서는 이러한 잔류응력에 영향을 끼치는 요인에 대하여 실험적인 방법을 이용하여 고찰하였다. 실험을 위해 적층제조 공정을 통해 시편을 제작하고 이를 절단하여 변형량 측정을 수행하였으며, 측정된 데이터를 curve fitting 등의 방법을 이용하여 적절히 보정함으로써 공정 파라미터 및 금속 분말 재사용 여부가 금속 적층제조 공정에서 발생한 잔류응력으로 인한 변형에 끼치는 영향을 정량적으로 분석할 수 있는 자료를 확보하였다. 이 결과로부터 금속 적층제조 공정에서 잔류응력으로 인한 변형의 크기에 가장 큰 영향을 끼치는 요소는 금속 분말 재사용 여부임을 확인하였다. 또한 레이저의 패턴, 적층 회전 각도와 같은 공정 파라미터도 변형 크기에 영향을 줄 수 있는 것을 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제37권2호
• /
• pp.223-229
• /
• 2024

Laser-induced plasmonic sintering of metal nanoparticles (NPs) holds significant promise as a technology for producing flexible conducting electrodes. This method offers immediate, straightforward, and scalable manufacturing approaches, eliminating the need for expensive facilities and intricate processes. Nevertheless, the metal NPs come at a high cost due to the intricate synthesis procedures required to ensure long-term reliability in terms of chemical stability and the prevention of NP aggregation. Herein, we induced the self-generation of metal nanoparticles from Ag organometallic ink, and fabricated highly conductive electrodes on flexible substrates through laser-assisted plasmonic annealing. To demonstrate the practicality of the fabricated flexible electrode, it was configured in a mesh pattern, realizing multi-touchable flexible touch screen panel.

• 대한치과보철학회지
• /
• 제38권2호
• /
• pp.214-225
• /
• 2000

The purpose of this study was to investigate the effects of investing conditions on the marginal discrepancy of conical telescope outer crown with Co-Cr-Ti alloy(Dentitan) and to compare the marginal discrepancy and the retention force of outer crowns using different pattern materials(plastic foil, casting wax, pattern resin). To evaluate the effects of investing conditions on the marginal discrepancy, patterns with plastic foil were invested under three different liquid/powder ratio conditions using phosphate bonded investment(Univest-nonprecious): standard, 10% decreased and 10% increased. At each liquid/powder ratio condition, metal ring was lined with single or double layers of ceramic ring liner. The marginal discrepancy of outer crown at different investing conditions was measured by ${\times}100$ compact measuring microscope(STM5, Olympus, Japan). For measurement of the marginal discrepancy and the retention force of outer crown using different pattern materials, the investing condition of 10% decreased liquid/powder ratio and double layers of ring liner was selected because this investing condition resulted in the best fit of outer crown. Marginal discrepancy was measured in the same way above and retention force on universal testing machine. Under the conditions of this study, the following conclusions were drawn: 1. The thickness of ring liner had more influence on the marginal discrepancy of outer crown than the liquid/powder ratio, and the acceptable marginal fitness could not be expected at the investing condition directed by investment manufacturer 2. There were no differences in the marginal discrepancy of outer crown among three different pattern materials(P>0.05). 3. Casting wax showed the greatest retention force(1640g) of outer crown, followed by pattern resin(1110g), plastic foil(820g). However, there was no significant difference between plastic foil and pattern resin(P>0.05). 4. Plastic foil showed the least variation in marginal discrepancy and retention force.

• Journal of Microbiology
• /
• 제41권3호
• /
• pp.189-195
• /
• 2003

To enhance the reductive dechlorination of polychlorinated biphenyls (PCBs) under anaerobic conditions, we examined the adjunctive effects of cobalt (Co) and nickel (Ni), which are the central metals of transition-metal cofactors of coenzyme F$\_$430/ and vitamin B$\_$12/, respectively, on the dechlorination of Aroclor 1248. After 32 weeks of incubation, the average numbers of chlorines per biphenyl in culture vials supplemented with 0.2, 0.5, and 1.0 mM of Co reduced from 3.88 to 3.39, 2.92, and 3.28, respectively. However, the numbers of chlorine after supplementing with Ni decreased from 3.88 to 3.43, regardless of the Ni concentrations. The observed congener distribution patterns of all vials with different conditions were similar to the pattern produced by the dechlorination process of H' after 21 weeks of incubation, and these patterns were unchanged up to week 32, except for vials supplemented with 0.5 and 1.0 mM of Co. In vials containing 0.5 mM of Co, meta-rich congeners, such as 25/ 25-,24/25-, and 25/23-chlorobiphenyls (CBPs), which were found as accumulated products of dechlorination in other conditions, were further dechlorinated, and 25/2-, 24/2-, and 2/2-CBPs were concomitantly increased after 32 weeks of incubation. In this case, the congener distribution was similar to the dechlorination pattern of process M. From these results, we suggested that the enrichment of cultures with Co might stimulate the growth of specific populations of meta-dechlorinators, and that populations might promote a change in the dechlorination process from H' to M, which is known to be less effective on the dechlorination of the more highly chlorinated congeners of PCBs.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.184-184
• /
• 2012

Recently, InGaN/GaN multi-quantum well grown on GaN pyramid structures have attracted much attention due to their hybrid characteristics of quantum well, quantum wire, and quantum dot. This gives us broad band emission which will be useful for phosphor-free white light emitting diode. On the other hand, by using quantum dot emission on top of the pyramid, site selective single photon source could be realized. However, these structures still have several limitations for the single photon source. For instance, the quantum efficiency of quantum dot emission should be improved further. As detection systems have limited numerical aperture, collection efficiency is also important issue. It has been known that micro-cavities can be utilized to modify the radiative decay rate and to control the radiation pattern of quantum dot. Researchers have also been interested in nano-cavities using localized surface plasmon. Although the plasmonic cavities have small quality factor due to high loss of metal, it could have small mode volume because plasmonic wavelength is much smaller than the wavelength in the dielectric cavities. In this work, we used localized surface plasmon to improve efficiency of InGaN qunatum dot as a single photon emitter. We could easily get the localized surface plasmon mode after deposit the metal thin film because lnGaN/GaN multi quantum well has the pyramidal geometry. With numerical simulation (i.e., Finite Difference Time Domain method), we observed highly enhanced decay rate and modified radiation pattern. To confirm these localized surface plasmon effect experimentally, we deposited metal thin films on InGaN/GaN pyramid structures using e-beam deposition. Then, photoluminescence and time-resolved photoluminescence were carried out to measure the improvement of radiative decay rate (Purcell factor). By carrying out cathodoluminescence (CL) experiments, spatial-resolved CL images could also be obtained. As we mentioned before, collection efficiency is also important issue to make an efficient single photon emitter. To confirm the radiation pattern of quantum dot, Fourier optics system was used to capture the angular property of emission. We believe that highly focused localized surface plasmon around site-selective InGaN quantum dot could be a feasible single photon emitter.

• 대한약리학회지
• /
• 제31권3호
• /
• pp.355-363
• /
• 1995

Calcium수송에 대한 기전을 추구하기위하여, carbachol을 사용하여 ml muscarinic receptor-transfected RBL-2H3 cell-line에서 다음과 같은 실험결과를 얻었기에 이에 보고한다. 1) Carbachol의 투여로 이들 cell-line에서 $Ca^{2+}$ influx가 농도에 따라 증가하였고, hexosaminidase 분비양도 의의있게 증가하였다. 2) Atropine 투여로 Carbachol의 상승작용이 의의있게 억제되었다. 3) 수종의 금속양이온을 투여하여 carbachol의 $Ca^{2+}$수송에 대한 영향을 관찰한 바, 이들 금속이온들은 $Ca^{2+}$의 influx를 의의있게 억제하였다. 4) PMA(20 nM) 투여로 carbachol의 hexosaminidase의 분비는 억제되지 못했지만 $Ca^{2+}$ influx는 억제되었다. 5) PTx $(0.2\;{\mu}g/ml)$ 투여로 carbachol의 hexosaminidase 분비가 의의있게 억제되었다. 위의 결과로 미루어 보아, 이 세포의 muscarinic receptor가 calcium channel을 통한 calcium수송에 매우 중요한 영향을 나타내는데, 이들 calcium ion channel은 적어도 두 종류가 존재하며, 하나는G-protein-dependent calcium channel에 의하며, 다른 하나는 G-protein-independent calcium channel에 대한 작용에 의한 것으로 생각된다. 또한 이 calcium channel들은 2가 또는 3가의 다른 금속 ion들에 의하여 calcium수송이 억제된다.

• 청정기술
• /
• 제22권4호
• /
• pp.232-240
• /
• 2016

최근 디스플레이 대형화 및 유연화로 인한 기존 ITO (indium tin oxide) 기반 TSP (touch screen panel)의 구현에 한계로 인한 대체 소재에 대한 다양한 연구가 진행 중이다. 기존 기술의 대체 소재로 메탈메쉬(Metal mesh) 방식에 대한 연구가 진행되고 상용화 수준까지 진행되었다. 그러나 시인성 및 모아레(Moire) 현상으로 인하여 $5{\mu}m$ 이하의 미세 전극 패턴이 필요하나 공정 중 패턴이 탈락하는 등의 문제로 낮은 수율의 문제가 있다. 기존의 레이저 CVD 리페어 공정에서 $10{\mu}m$ 이하의 패턴 형성의 한계, 위성액적 등의 문제로 인해 안정적인 미세전극 패턴 형성에는 어려움이 있었다. 본 연구에서는 $5{\mu}m$ 이하의 안정적인 패턴 형성을 위해서 다양한 점도에서 미세액적 토출이 가능한 전기수력학 프린팅 기술을 적용하였다. $5{\mu}m$ 이하의 안정적인 미세 전극 패턴 형성을 위해 주요 변수의 변화에 따른 최적 공정 조건을 도출하였고 최적 공정 조건을 입력하여 리페어 공정 적용 가능성을 확인하였다.

• 비파괴검사학회지
• /
• 제15권4호
• /
• pp.520-530
• /
• 1996

본 연구에서는 음향방출법을 이용하여 로터리 압축기의 인공 결함을 분류하기 위한 연구를 수행하였다. 이를 위해 프로그램을 개발하였고 선형 분류기, 경험적 Bayesian 분류기, 신경 회로망 분류기를 함께 사용하여 비교하였다. 그 결과 신경 회로망 분류기가 인식률 면에서 유리하였으며 신경 회로망 분류기의 경우 99%이상의 인식률을 얻을 수 있었다.