• 한국기계가공학회지
• /
• 제14권1호
• /
• pp.15-20
• /
• 2015

I developed a high-quality metal door with a hologram-pattern design using a high-speed electroforming process. In this study, the major processes were master production, conducting grant, nickel-sulfamate acid electroforming, ablation treatment, and final dressing. The processing system was provided with a nickel sulfamate pole, and a rotary-pole PP-plating jig in a circular tank. This approach could reduce defects and errors, as much as possible, by its use of a hologram pattern to create the master of a metal door. The thin-sheet metal-creation process for the door built-in metal pattern using electroforming with hologram was successful.

• 한국자동차공학회논문집
• /
• 제1권1호
• /
• pp.14-21
• /
• 1993

The effect of coolant flow pattern on the metal temperature of the combustion chamber was studied in 1.5L and 1.8L gasoline engines. One of the main important points in the design of the water jacket is the increase of the coolant flow velocity. In this paper, the water jackets of the cylinder head and the cylinder block were visualized for the purpose of improving the coolant flow pattern. By the use of this technique, the optimal design of the size and th location of the water transfer fole was possible. And, to lower the metal temperatures of the thermally critical parts, the drilled water passages were employed. To investigate of effect of the improved flow pattern and the drilled water passages, the metal temperatures of the combustion chamber were measured. As a result of the temperature measurement, it was found out that both the change of flow pattern and the drilled water passages have significant effect on the reduction of the peak metal temperature.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.502-502
• /
• 2007

Current thin film process using memory device fabrication process use expensive processes such as manufacturing of photo mask, coating of photo resist, exposure, development, and etching. However, direct printing technology has the merits about simple and cost effective processes because inks are directly injective without mask. And also, this technology has the advantage about fabrication of fine pattern line on various substrates such as PCB, FCPB, glass, polymer and so on. In this work, we have fabricated the fine and thick metal pattern line for the electronic circuit board using metal ink contains Ag nano-particles. Metal lines are fabricated by two types of printing methods. One is a conventional printing method which is able to quick fabrication of fine pattern line, but has various difficulties about thick and high resolution DPI(Dot per Inch) pattern lines because of bulge and piling up phenomenon. Another(Second) methods is sequential printing method which has a various merits of fabrication for fine, thick and high resolution pattern lines without bulge. In this work, conductivities of metal pattern line are investigated with respect to printing methods and pattern thickness. As a result, conductivity of thick pattern is about several un.

• 대한치과보철학회지
• /
• 제56권1호
• /
• pp.17-24
• /
• 2018

가철성 국소의치의 금속구조물을 제작하는 방법은 왁스 패턴을 제작하여 주조하는 lost wax technique이 주로 사용되어 왔으나, 디지털 기술의 발달로 서베잉과 금속구조물을 CAD (Computer aided design)로 디자인하여 제작할 수 있게 되었다. 여러 증례에서 CAD를 이용한 pattern의 프린팅 방식으로 얻은 레진 패턴이 구강 내에 정확하게 적합 되었고 최종 금속구조물 또한 좋은 적합도를 보였다고 보고되었다. 본 원저는 치조골 소실이 심한 상, 하악부분 무치악 환자에서 가철성 국소의치의 금속구조물을 두 가지 방식으로 각각 제작하였다. 첫 번째는 일반적인 lost wax technique과 두 번째는 CAD를 통해 pattern을 프린팅하여 금속구조물을 주조하는 방식으로 제작하여, CAD data와 fit checker를 이용해 금속구조물과 서베이드 크라운과의 유격을 측정함으로써 금속구조물의 적합도를 비교하였다. 두 가지 방식 모두 임상적으로 사용 가능한 금속구조물의 적합도를 얻었기에 이를 보고하고자 한다.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2002년도 춘계학술발표논문집
• /
• pp.106-108
• /
• 2002

반도체 physical layout design rule이 작아짐에 따라 Proximity effect와 overlay가 Pattern 구현에 크게 영향을 미치고 있다. Metal layer와 contact의 부족한 overlay margin으로 overlay 불량이 발생하고, 감소한 space margin으로 인해 bridge와 같은 문제가 나타난다. 따라서, resolution을 향상시키고, 최소한의 overlay margin을 확보함으로써 미세 pattern의 구현을 가능하게 한다. 이를 위해 OPC와 attPSM 같은 분해능향상기술이 사용된다. 그러나 attPSM의 사용은 원하지 않는 pattern이 생성되는 sidelobe와 같은 문제가 발생한다. 따라서 serial image simulation올 통해 추출한 rule을 rule-based correction에 적용하여 sidelobe현상을 방지한다. 그리고 overlay margin 부족으로 나타나는 문제는 metal layer와 contact overlap되는 영역의 line edge를 확장하고, rule checking을 통해 최소한의 space margin을 확보하여 해결한다 따라서 overlay error를 rule-based correction을 사용하여 효과적으로 방지한다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 추계총회 및 학술대회 논문집
• /
• pp.72-73
• /
• 2012

Metal line을 형성하는 방법에는 그라비아 인쇄, 잉크젯 인쇄, photo 공정 후 박막 증착 공정 등을 많이 사용한다. 본 연구에서는 Micro-imprinting 공정과 DFR photo lithography 공정을 통해 음각의 미세한 pattern을 형성한 후 sputtering과 printing을 이용하여 pattern의 filling을 통해 metal line을 구현하는 것을 목표로 하였다. Pattern을 형성한 후 RIE 공정을 통해 기판 표면의 친수성 처리를 하고, SAM 공정을 통해 코팅 막의 소수성 처리를 하였다. Sputtering과 전면 프린팅 및 건조 후 strip 공정을 통해 metal line을 형성하고, 이에 대한 표면 특성과 전기적 특성을 분석하였다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.12.1-12.1
• /
• 2009

For the micro conductive line, memory device fabrication process use many expensive processes such as manufactur-ing of photo mask, coating of photo resist, exposure, development, and etching. However, direct printing technology has the merits about simple and cost effective processes because nano-metal particles contained inks are directly injective without mask. And also, this technology has the advantage about fabrication of fine pattern line on various substrates such as FPCB, PCB, glass, polymer and so on. In this work, we have fabricated the fine and thick metal pattern line on flexible PCB substrate for the next generation electronic circuit using Ag nano-particles contained ink. To improve the line tolerance on flexible PCB, metal lines are fabricated by sequential prinitng method. Sequential printing method has vari-ous merits about fine, thick and high resolution pattern lines without bulge.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1119-1120
• /
• 2007

Nano-sized metal patterns were successfully fabricated on flexible PET substrate using nanoimprint lithography. 70nm line and space PMMA resist pattern was formed on PET substrate without residual layer by 'artial filling effect' and 20nm thin Cr metal layer was deposited by e-beam evaporation. Then, PMMA resist was selectively removed by acetone and 70nm narrow Cr pattern was formed.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2007년도 춘계학술발표회 초록집
• /
• pp.24-25
• /
• 2007

Nano-sized metal patterns were successfully fabricated on flexible PET substrate using nanoimprint lithography. 70nm line and space PMMA resist pattern was formed on PET substrate without residual layer by "partial filling effect' and 20nm thin Cr metal layer was deposited by e-beam evaporation. Then, PMMA resist was selectively removed by acetone and 70nm narrow Cr pattern was formed.

• 한국정밀공학회지
• /
• 제24권6호
• /
• pp.131-137
• /
• 2007

In metal casting process, it is very difficult to predict the form accuracy of cast part and reduce repeatability error. In this study, the variations of form accuracy were measured in the process of metal cast prototyping, where RP part is manufactured from CAD model in the first, and then, wax part is cast in the vacuum environment using the RP part as master model, and finally metal prototype is cast using ceramic mold and the wax part as pattern. To investigate the variations of form accuracy, the averages and standard deviations of error distribution of the parts measured by 3D scanner were compared. It was observed that the biggest shrinkage is generated during the extraction of wax part in the second step and the biggest deterioration of form accuracy is generated during the metal part casting in the last step.