• 환경위생공학
• /
• 제22권1호
• /
• pp.29-35
• /
• 2007

This study was examined adsorption ability of heavy metal Hg(I), Pb(II), and U(Vl) ion use of fruit from schizandra chinensis, The fruits of schizandra chinensis sample used breaking into fragments $50{\sim}100$ mesh. The sample solution was mixed fruits of schizandra chinensis and heavy metal ion. Each heavy metal ion of into solution was quantum analysis with ICP-AES. As the result, each condition of maxium adsorption ability of heavy metal ion was high in the range of pH 5-7, adsorption time was about 15 minutes, and the optimum temperature was $100^{\circ}C$. The heavy metal ion was increased adsorption in order of increasing concentration and in ethanol solution better than in aqueous solution.

• 한국가시화정보학회지
• /
• 제16권1호
• /
• pp.54-60
• /
• 2018

It is important to develop more efficient and productive casting processes for an automated high precision molten-metal casting system. Detailed analysis of molten-metal flow in the casting process by the numerical approach will help to optimize the control of a ladle. In this study, the smoothed particle hydrodynamics method was applied to analyze casting flow characteristics with different tilting angular speed and initial molten-metal level. The smoothed particle hydrodynamics technique has advantages to easily handle non-linear free surface behavior with the absence of a computational mesh. We found that tilting angular speed has relatively greater effect on the casting flowrate and that the effect of the initial molten-metal level is only minor. Further extensive study will be necessary to find an optimal condition for high efficient casting system.

• 조명전기설비학회논문지
• /
• 제25권2호
• /
• pp.126-130
• /
• 2011

Transparent conductive oxide (TCO) is an important part in the construction of dye-sensitized solar cells (DSCs) because of its low sheet resistance, sufficient light transparent ability and high photoelectrical response as a porous photo-electrode material of DSCs. However, the use of TCO for the two DSC electrodes can result in significant cost increase for the less effective DSCs compared to Si based solar cell. Therefore, the replacement of TCO is required for the commercial production of DSCs. In this study, TCO electrodes are replaced by stainless steel mesh. The 3.44[%] efficiency of the prepared TCO-less DSCs sample was obtained.

• Design & Manufacturing
• /
• 제7권1호
• /
• pp.34-39
• /
• 2013

The finite element method(FEM) presents some limitations when the mesh becomes highly distorted. For analysis of metal forming processes with large deformation, the conventional finite element method usually requires several remeshing operations due to severe mesh distortion. The new computational method developed in the recent years, usually designated by meshfree method, offers an attractive approach to avoid those time-consuming remeshing efforts. This new method uses a set of points to represent the problem domain with no need of an additional mesh. Also this new generation of computational method provides a higher rate of convergence than that of the conventional finite element methods. One of the promising applications of meshfree methods is the adaptive refinement for problems having multi-scale nature. In this study, an adaptive node generation procedure is proposed and also to illustrate the efficiency of proposed method, several numerical examples are presented.

• 한국전기전자재료학회논문지
• /
• 제37권2호
• /
• pp.223-229
• /
• 2024

Laser-induced plasmonic sintering of metal nanoparticles (NPs) holds significant promise as a technology for producing flexible conducting electrodes. This method offers immediate, straightforward, and scalable manufacturing approaches, eliminating the need for expensive facilities and intricate processes. Nevertheless, the metal NPs come at a high cost due to the intricate synthesis procedures required to ensure long-term reliability in terms of chemical stability and the prevention of NP aggregation. Herein, we induced the self-generation of metal nanoparticles from Ag organometallic ink, and fabricated highly conductive electrodes on flexible substrates through laser-assisted plasmonic annealing. To demonstrate the practicality of the fabricated flexible electrode, it was configured in a mesh pattern, realizing multi-touchable flexible touch screen panel.

• 자원리싸이클링
• /
• 제12권3호
• /
• pp.3-12
• /
• 2003

폐 탄탈륨 콘덴서에 함유된 탄탈륨 anode를 물리적인 방법으로 회수하고자 파쇄, 입도분리, 건식 자력선별 그리고 공기 분급 실험을 수행하였다. 단체분리를 위해 롤 크럿셔를 사용하여 폐회로 공정에서 8mesh 이하로 파쇄하면. 대부분의 탄탈륨 anode는 레진과의 단체분리는 이루어지나 일부 금속과의 단체분리가 되지 않은 상태로 남게된다. 파쇄된 시료를 8/10 mesh, 10/18 mesh, -18 mesh 로 분립한 결과, 금속물질은 8/10 mesh 입자에, 탄탈륨 anode는 +18 mesh에 주로 분포하며, -l8 mesh에는 레진의 함량이 71.5％로 레진이 탄탈륨 anode나 금속물질보다 미립화가 쉽게 이루어짐을 알 수 있었다. 자력선별에 의한 금속 물질의 분리효율은 원료의 입도에 따라 크게 차이가 있으나, 일부 금속물질이 약자성체이거나 탄탈륨anode와 단체분리가 이루어지지 않아 금속물질 제거율은 62.3%로 비교적 저조하였다. 탄탈륨 anode와 레진의 분리를 위한 입도별 공기 분급실험 결과, 각 입도별 최적 공기량은 각각 39㎥/h, 32㎥/h, 20㎥/h로 나타났다. 최적의 조건으로 회수한 탄탈륨 anode 생산율은 49.39wt.％, 각 성분의 함량은 97.47wt.% 탄탈륨 anode, 0.93wt.％ 레진. 1.51 wt.％ 금속으로 탄탈륨 anode 실수율은 94.45％이었다.

• 한국인터넷방송통신학회논문지
• /
• 제18권6호
• /
• pp.69-74
• /
• 2018

본 논문에서는 그물망 접지를 갖는 MCAA(Microstrip Comb Array Antenna)에서 그물망 구조의 변화가 MCAA에 미치는 영향을 조사하였다. 우선, 24GHz ISM 밴드에서 MCAA를 설계한 후 접지의 그물망 구조를 변화시키며 MCAA의 이득과 SLL(Side Lobe Level)의 변화를 조사하였다. 이 조사를 위해 그물망의 크기와 그물망 면적에 대한 도체를 제외한 공백의 면적 비인 공백율의 두 변수를 변화시켰다. MCAA는 방사체가 플랫한 MCAA와 방사체가 테이퍼된 MCAA의 두 가지 구조로 조사하였다. 공백율이 증가함에 따라 플랫한 MCAA와 테이퍼된 MCAA 모두에서 이득이 감소했다. 한편, 그물망 크기의 증가는 공백율 증가보다 안테나 이득을 더욱 극적으로 감소시켰다. 이러한 경향은 안테나 SLL에 대해서도 유사했으나 테이퍼된 MCAA가 플랫한 MCAA보다 그물망 크기 변화에 대한 영향을 좀 더 심하게 받았다.

• 한국자동차공학회논문집
• /
• 제21권5호
• /
• pp.176-180
• /
• 2013

After-treatment apparatus ceramic DPF (diesel particulate filter) have been applied to reduce harmful particulate matters(PM) among emissions from diesel engines so far, but they are easy to be fragile and weak in thermal shock. This research aims to investigate a metal type filter which is superior in mechanical strength and heat conduction rate and is beneficial economically in manufacturing. Basic performance of metal DPF such asloading test, temperature gradient test, thermal shock test, heat resistant test and back pressure was carried out. And then their experimental data provided key informations in designing and manufacturing such as detailed structures of metal mesh filter. Also diesel engine and vehicle of 2957cc displacement was tested under lug-down 3 mode and CVS-75 mode. PM reduction efficiency was 54.5% using metal DPF without loss of performance and fuel consumption.

• 동아시아식생활학회지
• /
• 제9권3호
• /
• pp.363-369
• /
• 1999

The heavy metal removability of four kinds of tea was investigated in the various conditions: particle size of tea(10, 35. 70, 100 mesh), concentration of heavy metal(25, 50, 100ppm) and extraction temperature(30. 50, 70. 10$0^{\circ}C$). The removabilities by the tea solids were increased as the particle size decreased, concentration of heavy metal increased, and extracting temperature increased. Of the four kinds of tea Pb, Cd and Cu removability by Eucommia ulmoides Oliv tea was the highest. In addition, heavy metal removability by Schizandra chinensis Baillon tea was better than that of other tea as extraction temperature was increased.

• 핵의학기술
• /
• 제19권1호
• /
• pp.51-56
• /
• 2015

Purpose As medical radiation exposures on patients are being social issues an interest in a relief of radiation exposures on patients is increasing. Further, there are many cases where some patients among who are getting PET/CT tests choose to get implanted with metal artifacts in their bodies. This study is to find out effects of presence or absence of metal artifacts when dose change or CT attenuation correction for the relief of radiation exposures are applied using phantoms through changes in standard uptake value (SUV). Materials and Methods GE company's Discovery 710 machine was used for PET/CT test equipments. We used NEMA IEC body phantoms. We also used screw and mesh cage made of titanium which are used in real clinical processes for the metal artifacts. Two experiments were conducted: One is to test and measure repeatedly about SUV about differences in CT attenuation corrections according to dose changes and another is to do the same procedure for SUV about the presence and absence of the metal artifacts. We injected $^{18}F-FDG$ into NEMA IEC body phantoms with a TBR ratio of 4:1 and then put the metal material into the transformation phantoms. Once a scanning for the metal artifacts was done we eliminated the metal artifacts and went on non-metal artifacts. For the each two experiments, we scanned repeatedly with CT kVp (140, 120, 100, 80) and mA (120, 80, 40, 20, 10) for an experimental condition. For PET, we reconstructed each with standard AC (STD) technique and quantitation achieved cnsistently QAC) technique among CT attenuation correction methods. We conducted a comparative analysis on measured average values and variations which were measured through repeated measure of SUV of region 1, 2, 3 spheres for each conditions of non-metal /metal scan. Results For each kVp, 120, 80, 40 (mA) of non/metal (screw, mesh cage) showed low frequency of fluctuation rates of above 2%. In 20, 10 mA above 2% of fluctuation rates appeared in high frequency. Also, when we compared the fluctuation rates of STD and QAC techniques in non/metal (screw, mesh cage) tests QAC technique showed about 1-10% of differences for each conditions compared to STD technique. In addition, metal types did not have significant effects on fluctuation rates. Conclusion We confirmed that SUV fluctuation rates for both STD and QAC techniques increase as dosage is lower. We also found that the SUV of PET data was maintained steadily in a low dosage for QAC technique when compared with STD technique. Hence, when the low dosage is used for the relief of radiation exposures on patients QAC technique may be exploited helpfully and this could be applied in the same way for patients with metal artifacts implanted in their bodies.