• Journal of computational fluids engineering
• /
• v.15 no.2
• /
• pp.7-13
• /
• 2010

Flight vehicles such as wheel wells and bomb bays have many cavities. The flow around a cavity is characterized as an unsteady flow because of the formation and dissipation of vortices brought by the interaction between the free stream shear layer and the internal flow of the cavity. The resonance phenomena can damage the structures around the cavity and negatively affect the aerodynamic performance and stability of the vehicle. In this study, a numerical analysis was performed for the cavity flows using the unsteady compressible three-dimensional Reynolds-Averaged Navier-Stokes (RANS) equation with Wilcox's turbulence model. The Message Passing Interface (MPI) parallelized code was used for the calculations by PC-cluster. The cavity has aspect ratios (L/D) of 5.5 ~ 7.5 with width ratios (W/D) of 2 ~ 4. The Mach and Reynolds numbers are 0.4 ~ 0.6 and $1.6{\times}10^6$, respectively. The occurrence of oscillation is observed in the "shear layer and transient mode" with a feedback mechanism. Based on the Sound Pressure Level (SPL) analysis of the pressure variation at the cavity trailing edge, the dominant frequencies are analyzed and compared with the results of Rossiter's formula. The dominant frequencies are very similar to the result of Rossiter's formula and other experimental datum in the low aspect ratio cavity (L/D = ~4.5). In the high aspect ratio cavity, however, there are other low dominant frequencies of the leading edge shear layer with the dominant frequencies of the feedback mechanism.

• 한국전산유체공학회:학술대회논문집
• /
• 2009.11a
• /
• pp.13-18
• /
• 2009

Flight vehicles such as wheel wells and bomb bays have many cavities. The flow around a cavity is characterized as an unsteady flow because of the formation and dissipation of vortices brought about by the interaction between the free stream shear layer and the internal flow of the cavity. The resonance phenomena can damage the structures around the cavity and negatively affect the aerodynamic performance and stability of the vehicle. In this study, a numerical analysis was performed for the cavity flows using the unsteady compressible three-dimensional Reynolds-Averaged Navier-Stokes (RANS) equation with Wilcox's turbulence model. The Message Passing Interface (MPI) parallelized code was used for the calculations by PC-cluster. The cavity has aspect ratios (L/D) of 2.5 ~ 7.5 with width ratios (W/D) of 2 ~ 4. The Mach and Reynolds numbers are 0.4 ~ 0.6 and $1.6{\times}106$, respectively. The occurrence of oscillation is observed in the "shear layer and transient mode" with a feedback mechanism. Based on the Sound Pressure Level (SPL) analysis of the pressure variation at the cavity trailing edge, the dominant frequencies are analyzed and compared with the results of Rossiter's formula. The dominant frequencies are very similar to the result of Rossiter's formula and other experimental data in the low aspect ratio cavity (L/D = ~ 4.5). In the large aspect ratio cavity, however, there are other low dominant frequencies due to the leading edge shear layer with the dominant frequencies of the feedback mechanism. The characteristics of the acoustic wave propagation are analyzed using the Correlation of Pressure Distribution (CPD).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.4A
• /
• pp.377-386
• /
• 2008

In this paper, a new handover management scheme has been proposed to reduce handover latency and to support fast handover without packet losses, so that it may be applicable to the wireless mobile Internet system such as IPv6-based WiBro system. To minimize the handover latency in processing of movement detection, we propose the handover management scheme which simplifies the handover message exchanging procedure between mobile subscriber station (MSS) and network by integrating layer 2 and layer 3 handovers efficiently based on the layer2 information. To reduce the processing delay from new care-of-address (NCoA) configuration during handover, we propose that NCoA is created, distributed and managed by new access control router (NACR). In addition, in order to minimize the packet transmission delay and eliminate the packet losses, the proposed scheme employs a crossover router (CR) which is upper network located over PACR and NACR and employs the packet buffering for MSS. The simulation study shows that the proposed scheme achieves loss-free packet delivery and low latency in the environment of narrow overlapped cell area or high velocity of the MSS, comparing the performance with the conventional schemes.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.12
• /
• pp.3910-3922
• /
• 2000

Current power systems are distributed geographically and operated in the form of Energy Management System(EMS)/ Supervision Control and Data Acquisition(SCADA) with the aid of computers and communications. Recently a variety of utilities have had interests in using inforrration technology to bring the efficiency and low operational costs. There is also a trend to integrdte the production, transmission, distribution and management/control of power into one and unified distributed system. To this end, Electric Power Hesearch Institute(EPRI) announced a new standard communication protocol called Inter-Control Center Protocol(ICCP).ICCP specifies the use of Manufacturing Message Specification(MMS) for services required by rccr in application layer and supports the communications between heterogeneous control centers. This paper presents the characteristics of MMS,ICCP and their relationship. Futherrnore, we implement the basic functional blocks of ICCP using MMS services under TCI/IP environments. Finally, we model a simple power system and apply the rccp protocol to this system in a window-based scheme, and finally show the operation and validation of this protocol.

• Journal of KIISE:Information Networking
• /
• v.28 no.4
• /
• pp.611-620
• /
• 2001

To meet the requirements of reliable service for various applications, a Reliable Multicast Transport Protocol should be implemented over IP Multicast where currently best-effort service is provided. Among the current researches, hierarchical tree-based mechanism has been proposed and actively studied. This mechanism is known to provide high scalability as well as reliability, but needs an additional tree configuring mechanism for building an efficient logical tree in transport layer. Bottom-up approach has been used for creating such a tree. This method has benefits from parallel tree construction for receivers, while it has some drawbacks such that it does not guarantee a loop-free tree and brings heavy message overhead during tree creation process. Therefore, this paper proposes a top-down based mechanism for constructing a control tree, which can guarantee loop-freeness by step-wise mannered tree building. From experimental simulations, it shows that the proposed mechanism has less message overhead. It is recommended that the bottom-up and the proposed top-down will be selectively used in real networks, according to the requirements of the concerned multicast applications.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.1
• /
• pp.135-145
• /
• 2000

Manufacturing Message Specification (MMS) is designed as a communication standard protocol, ISO/IEC 9506, on factory automation for messaging between heterogeneous programmable unit controller, PLC, NC, Robot, of different vendors on the networks. MMS is also a standard protocol of OSI reference model application layer, In this paper, we show an implementation of MMS over TCP/IP using ANSI-C programming language on the unix environment, and make java classification using java native interface (NJI) with MMS library. The use of java classification provides a basic environment ot overcome a difficult programming with different MMS application programming interface (MMS-I) which requires a siklled programming technique of graphic user interface (GUI). In this paper, we implement a MMS application program of the automated assembly model for printed circuit board based on WWW which shows the operation, control and monitoring of real manufacturing device (RMD) with web browser providing users for consistent user interface.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.6A
• /
• pp.617-623
• /
• 2007

A novel c-DSDV routing protocol is proposed in clustered mobile ad hoc networks. Clusterheads that manage members in their own cluster construct a higher layer backbone to which the DSDV concept is applied. Each clusterhead maintains its own global routing table by exchanging Update Request (UREQ) messages with its neighboring clusterheads. A number of entries in the table is as small as a number of clusterheads unlike a number of nodes in DSDV Since a UREQ message travels from one clusterhead to all its neighboring clusterheads that are at most 3 hops away, the topology convergence range by each UREQ message is at least 9 times as wide as that of DSDV and CGSR, greatly improving accuracy of routing information. However, overhead in c-DSDV is similar to that of DSDV because only clusterheads initiate UREQ messages. Delivery ratio increases by about 32$\sim$50%.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.2
• /
• pp.165-176
• /
• 2015

Clock or time synchronization protocol is one of the crucial factors that could determine the quality of the communication. With the rapid development of the network technology, more robust clock synchronization algorithm is required. IEEE 1588 is one of the possible solutions for a robust clock synchronization algorithm; however, there are still some challenges that need to be concerned in IEEE 1588 in term of reducing and stabilizing the PDV value. This survey paper shows several solutions that could improve the performance of IEEE 1588, including modifying the PTP message transmission, optimizing PTP method, filtering techniques, and using the hardware timestamp instead of application layer timestamp, and so on. Despite the improvement that is created with these techniques, the clock synchronization algorithm is still an open issue in the network communication.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.2
• /
• pp.239-250
• /
• 2022

LoRa is a physical layer technology designed to secure highly reliable long-range communication with introducing loco parentis tree network and chirp spreading spectrum. Since since a leaf can send message to more than one parents simultaneously with a single transmission in a region, packet delivery ratio increases logarithmically as the number of gateways increases. The delivery ratio, however, dramatically collapses even under loco parentis tree topology due to the limitations of ALOHA-like primitive MAC, . The proposed method is intended to exploit SDMA approach to reuse frequency in an area. With the view, TxPower of each sender for each message in a concurrent transmission is elaborately controlled to survive the collision at different gateway. Thus, the gain from the capture effect improves the capacity of resource-hungry Low Power and Wide Area Networks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.8B
• /
• pp.1129-1140
• /
• 2010

Wireless mesh networks have been widely studied as the next generation technology to solve the problems of conventional wireless networks. Particularly, Mobile WiMAX based wireless mesh networks are noticed due to many advantages. Mobile WiMAX standard provides two kinds of layer-3 handover schemes: Mobile IP and Proxy Mobile IP based handover schemes. MIP based handover scheme has a problem in that it incurs the long handover latency because mobile nodes generate a lot of handover messages. On the other hand, PMIP based handover scheme decreases the handover latency by reducing the number of handover messages, because mobile nodes do not participate in handover procedure. Therefore, layer-3 handover for Mobile WiMAX should be designed based on PMIP. However, conventional PMIP based handover still has latency overhead, because of many message exchanges between PBU and PBA after completing the layer-2 handover. Hence, in this paper, we propose a fast layer-3 handover scheme that achieves the lower handover latency for Mobile WiMAX based wireless mesh networks. Proposed scheme has advantages in terms of handover latency. Simulation results show that proposed scheme achieves low handover latency during the layer-3 handover.